[PATCH] powerpc/pseries: Add pool idle time at LPAR boot

[Shrikanth Hegde]

When there are no options specified for lparstat, it is expected to
give reports since LPAR(Logical Partition) boot. App is an indicator
for available processor pool in an Shared Processor LPAR(SPLPAR). App is
derived using pool_idle_time which is obtained using H_PIC call.

The interval based reports show correct App value while since boot
report shows very high App values. This happens because in that case app
is obtained by dividing pool idle time by LPAR uptime. Since pool idle
time is reported by the PowerVM hypervisor since its boot, it need not
align with LPAR boot. This leads to large App values.

To fix that export boot pool idle time in lparcfg and powerpc-utils will
use this info to derive App as below for since boot reports.

App = (pool idle time - boot pool idle time) / (uptime * timebase)

Results:: Observe app values.
====================== Shared LPAR ================================
lparstat
System Configuration
type=Shared mode=Uncapped smt=8 lcpu=12 mem=15573440 kB cpus=37 ent=12.00

reboot
stress-ng --cpu=$(nproc) -t 600
sleep 600
So in this case app is expected to close to 37-6=31.

====== 6.9-rc1 and lparstat 1.3.10  =============
%user  %sys %wait    %idle    physc %entc lbusy   app  vcsw phint
----- ----- -----    -----    ----- ----- ----- ----- ----- -----
47.48  0.01  0.00    52.51     0.00  0.00 47.49 69099.72 541547    21

=== With this patch and powerpc-utils patch to do the above equation ===
%user  %sys %wait    %idle    physc %entc lbusy   app  vcsw phint
----- ----- -----    -----    ----- ----- ----- ----- ----- -----
47.48  0.01  0.00    52.51     5.73 47.75 47.49 31.21 541753    21
=====================================================================

Note: physc, purr/idle purr being inaccurate is being handled in a
separate patch in powerpc-utils tree.

Signed-off-by: Shrikanth Hegde <sshegde at linux.ibm.com>
---
Note:

This patch needs to merged first in the kernel for the powerpc-utils
patches to work. powerpc-utils patches will be posted to its mailing
list and link would be found in the reply to this patch if available.

arch/powerpc/platforms/pseries/lparcfg.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/lparcfg.c b/arch/powerpc/platforms/pseries/lparcfg.c
index f73c4d1c26af..8df4e7c529d7 100644
--- a/arch/powerpc/platforms/pseries/lparcfg.c
+++ b/arch/powerpc/platforms/pseries/lparcfg.c
@@ -184,6 +184,8 @@ static unsigned h_pic(unsigned long *pool_idle_time,
 	return rc;
 }

+unsigned long boot_pool_idle_time;
+
 /*
  * parse_ppp_data
  * Parse out the data returned from h_get_ppp and h_pic
@@ -218,6 +220,7 @@ static void parse_ppp_data(struct seq_file *m)
 		h_pic(&pool_idle_time, &pool_procs);
 		seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
 		seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
+		seq_printf(m, "boot_pool_idle_time=%ld\n", boot_pool_idle_time);
 	}

 	seq_printf(m, "unallocated_capacity_weight=%d\n",
@@ -792,6 +795,7 @@ static const struct proc_ops lparcfg_proc_ops = {
 static int __init lparcfg_init(void)
 {
 	umode_t mode = 0444;
+	unsigned long num_procs;

 	/* Allow writing if we have FW_FEATURE_SPLPAR */
 	if (firmware_has_feature(FW_FEATURE_SPLPAR))
@@ -801,6 +805,9 @@ static int __init lparcfg_init(void)
 		printk(KERN_ERR "Failed to create powerpc/lparcfg\n");
 		return -EIO;
 	}
+
+	h_pic(&boot_pool_idle_time, &num_procs);
+
 	return 0;
 }
 machine_device_initcall(pseries, lparcfg_init);
--
2.39.3