[PATCH v4 13/13] mm/gup: Handle hugetlb in the generic follow_page_mask code

Wed Apr 3 02:26:28 AEDT 2024

On 02.04.24 16:48, Ryan Roberts wrote:
> Hi Peter,
> 
> On 27/03/2024 15:23, peterx at redhat.com wrote:
>> From: Peter Xu <peterx at redhat.com>
>>
>> Now follow_page() is ready to handle hugetlb pages in whatever form, and
>> over all architectures.  Switch to the generic code path.
>>
>> Time to retire hugetlb_follow_page_mask(), following the previous
>> retirement of follow_hugetlb_page() in 4849807114b8.
>>
>> There may be a slight difference of how the loops run when processing slow
>> GUP over a large hugetlb range on cont_pte/cont_pmd supported archs: each
>> loop of __get_user_pages() will resolve one pgtable entry with the patch
>> applied, rather than relying on the size of hugetlb hstate, the latter may
>> cover multiple entries in one loop.
>>
>> A quick performance test on an aarch64 VM on M1 chip shows 15% degrade over
>> a tight loop of slow gup after the path switched.  That shouldn't be a
>> problem because slow-gup should not be a hot path for GUP in general: when
>> page is commonly present, fast-gup will already succeed, while when the
>> page is indeed missing and require a follow up page fault, the slow gup
>> degrade will probably buried in the fault paths anyway.  It also explains
>> why slow gup for THP used to be very slow before 57edfcfd3419 ("mm/gup:
>> accelerate thp gup even for "pages != NULL"") lands, the latter not part of
>> a performance analysis but a side benefit.  If the performance will be a
>> concern, we can consider handle CONT_PTE in follow_page().
>>
>> Before that is justified to be necessary, keep everything clean and simple.
>>
>> Reviewed-by: Jason Gunthorpe <jgg at nvidia.com>
>> Signed-off-by: Peter Xu <peterx at redhat.com>
> 
> Afraid I'm seeing an oops when running gup_longterm test on arm64 with current mm-unstable. Git bisect blames this patch. The oops reproduces for me every time on 2 different machines:
> 
> 
> [    9.340416] kernel BUG at mm/gup.c:778!
> [    9.340746] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
> [    9.341199] Modules linked in:
> [    9.341481] CPU: 1 PID: 1159 Comm: gup_longterm Not tainted 6.9.0-rc2-00210-g910ff1a347e4 #11
> [    9.342232] Hardware name: linux,dummy-virt (DT)
> [    9.342647] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [    9.343195] pc : follow_page_mask+0x4d4/0x880
> [    9.343580] lr : follow_page_mask+0x4d4/0x880
> [    9.344018] sp : ffff8000898b3aa0
> [    9.344345] x29: ffff8000898b3aa0 x28: fffffdffc53973e8 x27: 00003c0005d08000
> [    9.345028] x26: ffff00014e5cfd08 x25: ffffd3513a40c000 x24: fffffdffc5d08000
> [    9.345682] x23: ffffc1ffc0000000 x22: 0000000000080101 x21: ffff8000898b3ba8
> [    9.346337] x20: 0000fffff4200000 x19: ffff00014e52d508 x18: 0000000000000010
> [    9.347005] x17: 5f656e6f7a5f7369 x16: 2120262620296567 x15: 6170286461654865
> [    9.347713] x14: 6761502128454741 x13: 2929656761702865 x12: 6761705f65636976
> [    9.348371] x11: 65645f656e6f7a5f x10: ffffd3513b31d6e0 x9 : ffffd3513852f090
> [    9.349062] x8 : 00000000ffffefff x7 : ffffd3513b31d6e0 x6 : 0000000000000000
> [    9.349753] x5 : ffff00017ff98cc8 x4 : 0000000000000fff x3 : 0000000000000000
> [    9.350397] x2 : 0000000000000000 x1 : ffff000190e8b480 x0 : 0000000000000052
> [    9.351097] Call trace:
> [    9.351312]  follow_page_mask+0x4d4/0x880
> [    9.351700]  __get_user_pages+0xf4/0x3e8
> [    9.352089]  __gup_longterm_locked+0x204/0xa70
> [    9.352516]  pin_user_pages+0x88/0xc0
> [    9.352873]  gup_test_ioctl+0x860/0xc40
> [    9.353249]  __arm64_sys_ioctl+0xb0/0x100
> [    9.353648]  invoke_syscall+0x50/0x128
> [    9.354022]  el0_svc_common.constprop.0+0x48/0xf8
> [    9.354488]  do_el0_svc+0x28/0x40
> [    9.354822]  el0_svc+0x34/0xe0
> [    9.355128]  el0t_64_sync_handler+0x13c/0x158
> [    9.355489]  el0t_64_sync+0x190/0x198
> [    9.355793] Code: aa1803e0 d000d8e1 91220021 97fff560 (d4210000)
> [    9.356280] ---[ end trace 0000000000000000 ]---
> [    9.356651] note: gup_longterm[1159] exited with irqs disabled
> [    9.357141] note: gup_longterm[1159] exited with preempt_count 2
> [    9.358033] ------------[ cut here ]------------
> [    9.358800] WARNING: CPU: 1 PID: 0 at kernel/context_tracking.c:128 ct_kernel_exit.constprop.0+0x108/0x120
> [    9.360157] Modules linked in:
> [    9.360541] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D            6.9.0-rc2-00210-g910ff1a347e4 #11
> [    9.361626] Hardware name: linux,dummy-virt (DT)
> [    9.362087] pstate: 204003c5 (nzCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [    9.362758] pc : ct_kernel_exit.constprop.0+0x108/0x120
> [    9.363306] lr : ct_idle_enter+0x10/0x20
> [    9.363845] sp : ffff8000801abdc0
> [    9.364222] x29: ffff8000801abdc0 x28: 0000000000000000 x27: 0000000000000000
> [    9.364961] x26: 0000000000000000 x25: ffff00014149d780 x24: 0000000000000000
> [    9.365557] x23: 0000000000000000 x22: ffffd3513b299d48 x21: ffffd3513a785730
> [    9.366239] x20: ffffd3513b299c28 x19: ffff00017ffa7da0 x18: 0000fffff5ffffff
> [    9.366869] x17: 0000000000000000 x16: 1fffe0002a21a8c1 x15: 0000000000000000
> [    9.367524] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002
> [    9.368207] x11: 0000000000000001 x10: 0000000000000ad0 x9 : ffffd35138589230
> [    9.369123] x8 : ffff00014149e2b0 x7 : 0000000000000000 x6 : 000000000f8c0fb2
> [    9.370403] x5 : 4000000000000002 x4 : ffff2cb045825000 x3 : ffff8000801abdc0
> [    9.371170] x2 : ffffd3513a782da0 x1 : 4000000000000000 x0 : ffffd3513a782da0
> [    9.372279] Call trace:
> [    9.372519]  ct_kernel_exit.constprop.0+0x108/0x120
> [    9.373216]  ct_idle_enter+0x10/0x20
> [    9.373562]  default_idle_call+0x3c/0x160
> [    9.374055]  do_idle+0x21c/0x280
> [    9.374394]  cpu_startup_entry+0x3c/0x50
> [    9.374797]  secondary_start_kernel+0x140/0x168
> [    9.375220]  __secondary_switched+0xb8/0xc0
> [    9.375875] ---[ end trace 0000000000000000 ]---
> 
> 
> The oops trigger is at mm/gup.c:778:
> VM_BUG_ON_PAGE(!PageHead(page) && !is_zone_device_page(page), page);
> 
> 
> This is the output of gup_longterm (last output is just before oops):
> 
> # [INFO] detected hugetlb page size: 2048 KiB
> # [INFO] detected hugetlb page size: 32768 KiB
> # [INFO] detected hugetlb page size: 64 KiB
> # [INFO] detected hugetlb page size: 1048576 KiB
> TAP version 13
> 1..70
> # [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd
> ok 1 Should have worked
> # [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with tmpfile
> ok 2 Should have failed
> # [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with local tmpfile
> ok 3 Should have failed
> # [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
> ok 4 Should have worked
> # [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (32768 kB)
> 
> 
> So 2M passed ok, and its failing for 32M, which is cont-pmd. I'm guessing you're trying to iterate 2M into a cont-pmd folio and ending up with an unexpected tail page?

I assume we find the expected tail page, it's just that the check

VM_BUG_ON_PAGE(!PageHead(page) && !is_zone_device_page(page), page);

Doesn't make sense with hugetlb folios. We might have a tail page mapped 
in a cont-pmd entry. As soon as we call follow_huge_pmd() on "not the 
first cont-pmd entry", we trigger this check.

Likely this sanity check must also allow for hugetlb folios. Or we 
should just remove it completely.

In the past, we wanted to make sure that we never get tail pages of THP 
from PMD entries, because something would currently be broken (we don't 
support THP > PMD).

-- 
Cheers,

David / dhildenb