[PATCH v6 08/30] dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Sun Sep 24 03:39:49 AEST 2023
On 22/09/2023 09:58, Herve Codina wrote:
> The QMC (QUICC mutichannel controller) is a controller present in some
> PowerQUICC SoC such as MPC885.
> The QMC HDLC uses the QMC controller to transfer HDLC data.
>
> Additionally, a framer can be connected to the QMC HDLC.
> If present, this framer is the interface between the TDM bus used by the
> QMC HDLC and the E1/T1 line.
> The QMC HDLC can use this framer to get information about the E1/T1 line
> and configure the E1/T1 line.
>
> Signed-off-by: Herve Codina <herve.codina at bootlin.com>
> ---
> .../soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml | 24 +++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
> index 82d9beb48e00..61dfd5ef7407 100644
> --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
> +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
> @@ -101,6 +101,27 @@ patternProperties:
> Channel assigned Rx time-slots within the Rx time-slots routed by the
> TSA to this cell.
>
> + compatible:
> + const: fsl,qmc-hdlc
Why this is not a device/SoC specific compatible?
> +
> + fsl,framer:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + phandle to the framer node. The framer is in charge of an E1/T1 line
> + interface connected to the TDM bus. It can be used to get the E1/T1 line
> + status such as link up/down.
> +
> + allOf:
> + - if:
> + properties:
> + compatible:
> + not:
> + contains:
> + const: fsl,qmc-hdlc
> + then:
> + properties:
> + fsl,framer: false
> +
> required:
> - reg
> - fsl,tx-ts-mask
> @@ -159,5 +180,8 @@ examples:
> fsl,operational-mode = "hdlc";
> fsl,tx-ts-mask = <0x00000000 0x0000ff00>;
> fsl,rx-ts-mask = <0x00000000 0x0000ff00>;
> +
> + compatible = "fsl,qmc-hdlc";
compatible is always the first property.
> + fsl,framer = <&framer>;
> };
> };
Best regards,
Krzysztof
More information about the Linuxppc-dev
mailing list