[PATCH v5 2/3] PCI/AER: Disable AER interrupt on suspend

[Sathyanarayanan Kuppuswamy]

On 5/11/23 6:36 AM, Kai-Heng Feng wrote:
> PCIe service that shares IRQ with PME may cause spurious wakeup on
> system suspend.
> 
> This is very similar to previous attempts to suspend AER and DPC [1],
> but this time disabling AER IRQ is to prevent immediate PME wakeup when
> AER shares the same IRQ line with PME.

IMHO, you don't need to mention the previous submission reason.

> 
> It's okay to disable AER because PCIe Base Spec 5.0, section 5.2 "Link
> State Power Management" states that TLP and DLLP transmission is
> disabled for a Link in L2/L3 Ready (D3hot), L2 (D3cold with aux power)
> and L3 (D3cold), hence we don't lose much here to disable AER IRQ during
> system suspend.

May be something like below?

PCIe services that share an IRQ with PME, such as AER or DPC, may cause a
spurious wakeup on system suspend. To prevent this, disable the AER
interrupt notification during the system suspend process.

As Per PCIe Base Spec 5.0, section 5.2, titled "Link State Power Management",
TLP and DLLP transmission are disabled for a Link in L2/L3 Ready (D3hot), L2
(D3cold with aux power) and L3 (D3cold) states. So disabling the AER notification
during suspend and re-enabling them during the resume process should not affect
the basic functionality.

> 
> [1] https://lore.kernel.org/linux-pci/20220408153159.106741-1-kai.heng.feng@canonical.com/
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
> 
> Reviewed-by: Mika Westerberg <mika.westerberg at linux.intel.com>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng at canonical.com>
> ---
> v5:
>  - Wording.
> 
> v4:
> v3:
>  - No change.
> 
> v2:
>  - Only disable AER IRQ.
>  - No more check on PME IRQ#.
>  - Use helper.
> 
>  drivers/pci/pcie/aer.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index 1420e1f27105..9c07fdbeb52d 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -1356,6 +1356,26 @@ static int aer_probe(struct pcie_device *dev)
>  	return 0;
>  }
>  
> +static int aer_suspend(struct pcie_device *dev)
> +{
> +	struct aer_rpc *rpc = get_service_data(dev);
> +	struct pci_dev *pdev = rpc->rpd;
> +
> +	aer_disable_irq(pdev);
> +
> +	return 0;
> +}
> +
> +static int aer_resume(struct pcie_device *dev)
> +{
> +	struct aer_rpc *rpc = get_service_data(dev);
> +	struct pci_dev *pdev = rpc->rpd;
> +
> +	aer_enable_irq(pdev);
> +
> +	return 0;
> +}
> +
>  /**
>   * aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP
>   * @dev: pointer to Root Port, RCEC, or RCiEP
> @@ -1420,6 +1440,8 @@ static struct pcie_port_service_driver aerdriver = {
>  	.service	= PCIE_PORT_SERVICE_AER,
>  
>  	.probe		= aer_probe,
> +	.suspend	= aer_suspend,
> +	.resume		= aer_resume,
>  	.remove		= aer_remove,
>  };
>  

-- 
Sathyanarayanan Kuppuswamy
Linux Kernel Developer