[PATCH v12 13/13] arm64: dts: ls1088ardb: Add serdes descriptions

[Ioana Ciornei]

On Tue, Mar 21, 2023 at 04:13:12PM -0400, Sean Anderson wrote:
> This adds serdes support to the LS1088ARDB. I have tested the QSGMII
> ports as well as the two 10G ports. The SFP slot is now fully supported,
> instead of being modeled as a fixed-link.
> 
> Linux hangs around when the serdes is initialized if the si5341 is
> enabled with the in-tree driver, so I have modeled it as a two fixed
> clocks instead. There are a few registers in the QIXIS FPGA which
> control the SFP GPIOs; I have modeled them as discrete GPIO controllers
> for now. I never saw the AQR105 interrupt fire; not sure what was going
> on, but I have removed it to force polling.

So you didn't see the interrupt fire even without these patches?

I just tested this on a LS1088ARDB and it works.

	root at localhost:~# cat /proc/interrupts | grep extirq
	 99:          5  ls-extirq   2 Level     0x0000000008b97000:00
	root at localhost:~# ip link set dev endpmac2 up
	root at localhost:~# cat /proc/interrupts | grep extirq
	 99:          6  ls-extirq   2 Level     0x0000000008b97000:00
	root at localhost:~# ip link set dev endpmac2 down
	root at localhost:~# cat /proc/interrupts | grep extirq
	 99:          7  ls-extirq   2 Level     0x0000000008b97000:00

Please don't just remove things.

Ioana