[PATCH 2/7] watchdog/hardlockup: Make the config checks more straightforward

[Doug Anderson]

Hi,

On Wed, Jun 7, 2023 at 8:25 AM Petr Mladek <pmladek at suse.com> wrote:
>
> diff --git a/arch/Kconfig b/arch/Kconfig
> index 422f0ffa269e..13c6e596cf9e 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -404,17 +404,27 @@ config HAVE_NMI_WATCHDOG
>         depends on HAVE_NMI
>         bool
>         help
> -         The arch provides a low level NMI watchdog. It provides
> -         asm/nmi.h, and defines its own watchdog_hardlockup_probe() and
> -         arch_touch_nmi_watchdog().
> +         The arch provides its own hardlockup detector implementation instead
> +         of the generic perf one.

nit: did you mean to have different wording here compared to
HAVE_HARDLOCKUP_DETECTOR_ARCH? Here you say "the generic perf one" and
there you say "the generic ones", though it seems like you mean them
to be the same.

> +
> +         Sparc64 defines this variable without HAVE_HARDLOCKUP_DETECTOR_ARCH.
> +         It does _not_ use the command line parameters and sysctl interface
> +         used by generic hardlockup detectors. Instead it is enabled/disabled
> +         by the top-level watchdog interface that is common for both softlockup
> +         and hardlockup detectors.
>
>  config HAVE_HARDLOCKUP_DETECTOR_ARCH
>         bool
>         select HAVE_NMI_WATCHDOG
>         help
> -         The arch chooses to provide its own hardlockup detector, which is
> -         a superset of the HAVE_NMI_WATCHDOG. It also conforms to config
> -         interfaces and parameters provided by hardlockup detector subsystem.
> +         The arch provides its own hardlockup detector implementation instead
> +         of the generic ones.
> +
> +         It uses the same command line parameters, and sysctl interface,
> +         as the generic hardlockup detectors.
> +
> +         HAVE_NMI_WATCHDOG is selected to build the code shared with
> +         the sparc64 specific implementation.
>
>  config HAVE_PERF_REGS
>         bool
> diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> index 3e91fa33c7a0..d201f5d3876b 100644
> --- a/lib/Kconfig.debug
> +++ b/lib/Kconfig.debug
> @@ -1035,16 +1035,33 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
>
>           Say N if unsure.
>
> +config HAVE_HARDLOCKUP_DETECTOR_BUDDY
> +       bool
> +       depends on SMP
> +       default y

I think you simplify your life if you also add:

  depends on !HAVE_NMI_WATCHDOG

The existing config system has always assumed that no architecture
defines both HAVE_HARDLOCKUP_DETECTOR_PERF and HAVE_NMI_WATCHDOG
(symbols would have clashed and you would get a link error as two
watchdogs try to implement the same weak symbol). If you add the extra
dependency to "buddy" as per above, then a few things below fall out.
I'll try to point them out below.


> +
>  #
> -# arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard
> -# lockup detector rather than the perf based detector.
> +# Global switch whether to build a hardlockup detector at all. It is available
> +# only when the architecture supports at least one implementation. There are
> +# two exceptions. The hardlockup detector is newer enabled on:

s/newer/never/


> +#
> +#      s390: it reported many false positives there
> +#
> +#      sparc64: has a custom implementation which is not using the common
> +#              hardlockup command line options and sysctl interface.
> +#
> +# Note that HAVE_NMI_WATCHDOG is used to distinguish the sparc64 specific
> +# implementaion. It is automatically enabled also for other arch-specific
> +# variants which set HAVE_HARDLOCKUP_DETECTOR_ARCH. It makes the check
> +# of avaialable and supported variants quite tricky.
>  #
>  config HARDLOCKUP_DETECTOR
>         bool "Detect Hard Lockups"
>         depends on DEBUG_KERNEL && !S390
> -       depends on HAVE_HARDLOCKUP_DETECTOR_NON_ARCH || HAVE_HARDLOCKUP_DETECTOR_ARCH
> +       depends on ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH

Adding the dependency to buddy (see ablove) would simplify the above
to just this:

depends on HAVE_HARDLOCKUP_DETECTOR_PERF ||
HAVE_HARDLOCKUP_DETECTOR_BUDDY || HAVE_HARDLOCKUP_DETECTOR_ARCH

As per above, it's simply a responsibility of architectures not to
define that they have both "perf" if they have the NMI watchdog, so
it's just buddy to worry about.


> +       imply HARDLOCKUP_DETECTOR_PERF
> +       imply HARDLOCKUP_DETECTOR_BUDDY
>         select LOCKUP_DETECTOR
> -       select HARDLOCKUP_DETECTOR_NON_ARCH if HAVE_HARDLOCKUP_DETECTOR_NON_ARCH
>
>         help
>           Say Y here to enable the kernel to act as a watchdog to detect
> @@ -1055,9 +1072,15 @@ config HARDLOCKUP_DETECTOR
>           chance to run.  The current stack trace is displayed upon detection
>           and the system will stay locked up.
>
> +#
> +# Note that arch-specific variants are always preferred.
> +#
>  config HARDLOCKUP_DETECTOR_PREFER_BUDDY
>         bool "Prefer the buddy CPU hardlockup detector"
> -       depends on HAVE_HARDLOCKUP_DETECTOR_PERF && SMP
> +       depends on HARDLOCKUP_DETECTOR
> +       depends on HAVE_HARDLOCKUP_DETECTOR_PERF && HAVE_HARDLOCKUP_DETECTOR_BUDDY
> +       depends on !HAVE_NMI_WATCHDOG

Can get rid of above "!HAVE_NMI_WATCHDOG" if it's added to
HAVE_HARDLOCKUP_DETECTOR_BUDDY.


> +       default n

I'm pretty sure "default n" isn't needed.


>         help
>           Say Y here to prefer the buddy hardlockup detector over the perf one.
>
> @@ -1071,39 +1094,27 @@ config HARDLOCKUP_DETECTOR_PREFER_BUDDY
>
>  config HARDLOCKUP_DETECTOR_PERF
>         bool
> -       depends on HAVE_HARDLOCKUP_DETECTOR_PERF
> +       depends on HARDLOCKUP_DETECTOR
> +       depends on HAVE_HARDLOCKUP_DETECTOR_PERF && !HARDLOCKUP_DETECTOR_PREFER_BUDDY
> +       depends on !HAVE_NMI_WATCHDOG

We don't really need the "!HAVE_NMI_WATCHDOG". A user wouldn't be able
to mess this up and it's up to an architecture not to define both
HAVE_HARDLOCKUP_DETECTOR_PERF and HAVE_NMI_WATCHDOG.


>         select HARDLOCKUP_DETECTOR_COUNTS_HRTIMER
>
>  config HARDLOCKUP_DETECTOR_BUDDY
>         bool
> -       depends on SMP
> +       depends on HARDLOCKUP_DETECTOR
> +       depends on HAVE_HARDLOCKUP_DETECTOR_BUDDY
> +       depends on !HAVE_HARDLOCKUP_DETECTOR_PERF || HARDLOCKUP_DETECTOR_PREFER_BUDDY
> +       depends on !HAVE_NMI_WATCHDOG

Get rid of "!HAVE_NMI_WATCHDOG" and it should be in
HAVE_HARDLOCKUP_DETECTOR_BUDDY


Overall, though, I agree that this improves things! Thanks! :-)