[PATCH v4 01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller

Herve Codina herve.codina at bootlin.com
Tue Jan 31 18:44:49 AEDT 2023


On Mon, 30 Jan 2023 12:27:44 -0600
Hi Rob,

Rob Herring <robh at kernel.org> wrote:

> On Thu, Jan 26, 2023 at 09:32:13AM +0100, Herve Codina wrote:
> > Add support for the time slot assigner (TSA)
> > available in some PowerQUICC SoC such as MPC885
> > or MPC866.
> > 
> > Signed-off-by: Herve Codina <herve.codina at bootlin.com>
> > ---
> >  .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml      | 261 ++++++++++++++++++  
> 
> fsl,cpm1-tsa.yaml

Right, will be change in next iteration.

> 
> >  include/dt-bindings/soc/fsl,tsa.h             |  13 +
> >  2 files changed, 274 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
> >  create mode 100644 include/dt-bindings/soc/fsl,tsa.h
> > 
> > diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
> > new file mode 100644
> > index 000000000000..d027d4c3cf10
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
> > @@ -0,0 +1,261 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: PowerQUICC CPM Time-slot assigner (TSA) controller
> > +
> > +maintainers:
> > +  - Herve Codina <herve.codina at bootlin.com>
> > +
> > +description:
> > +  The TSA is the time-slot assigner that can be found on some PowerQUICC SoC.
> > +  Its purpose is to route some TDM time-slots to other internal serial
> > +  controllers.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - fsl,mpc885-tsa
> > +          - fsl,mpc866-tsa
> > +      - const: fsl,cpm1-tsa
> > +
> > +  reg:
> > +    items:
> > +      - description: SI (Serial Interface) register base
> > +      - description: SI RAM base
> > +
> > +  reg-names:
> > +    items:
> > +      - const: si_regs
> > +      - const: si_ram
> > +
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 0
> > +
> > +  '#serial-cells':  
> 
> Not a standard property. What's this for? #.*-cells applies to a 
> specific pattern of properties.

A TSA consumer, such as QMC in this series, can have a phandle with an
argument that points to this TSA node. For instance, in the QMC
node, we have:
  fsl,tsa-serial = <&tsa FSL_CPM_TSA_SCC4>;

The #serial-cells property in TSA specify the presence of this argument.

What do you think if I add the following description:
   '#serial-cells':
     const: 1
     description:
       TSA consumers that use a phandle to TSA need to pass the serial
       identifier with this phandle (defined in dt-bindings/soc/fsl,tsa.h).
       For instance "fsl,tsa-serial = <&tsa FSL_CPM_TSA_SCC4>;".

> 
> 
> > +    const: 1
> > +
> > +patternProperties:
> > +  '^tdm@[0-1]$':
> > +    description:
> > +      The TDM managed by this controller
> > +    type: object
> > +
> > +    additionalProperties: false
> > +
> > +    properties:
> > +      reg:
> > +        minimum: 0
> > +        maximum: 1
> > +        description:
> > +          The TDM number for this TDM, 0 for TDMa and 1 for TDMb
> > +
> > +      fsl,common-rxtx-pins:
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +        description:
> > +          The hardware can use four dedicated pins for Tx clock, Tx sync, Rx
> > +          clock and Rx sync or use only two pins, Tx/Rx clock and Tx/Rx sync.
> > +          Without the 'fsl,common-rxtx-pins' property, the four pins are used.
> > +          With the 'fsl,common-rxtx-pins' property, two pins are used.
> > +
> > +      clocks:
> > +        minItems: 2
> > +        items:
> > +          - description: External clock connected to L1RSYNC pin
> > +          - description: External clock connected to L1RCLK pin
> > +          - description: External clock connected to L1TSYNC pin
> > +          - description: External clock connected to L1TCLK pin
> > +      clock-names:
> > +        minItems: 2
> > +        items:
> > +          - const: l1rsync
> > +          - const: l1rclk
> > +          - const: l1tsync
> > +          - const: l1tclk
> > +
> > +      fsl,diagnostic-mode:
> > +        $ref: /schemas/types.yaml#/definitions/string
> > +        enum: [disabled, echo, internal-loopback, control-loopback]  
> 
> Seems like you would want userspace control of this, not have to make 
> firmware changes and reboot to change.

I don't plan to give userspace control of this diagnostic mode.
When I need to use this diagnostic mode, I plan to set this property
in DT and reboot the system.

> 
> > +        default: disabled
> > +        description: |
> > +          The diagnostic mode can be used to diagnose some communication issues.
> > +          It should not be set (or set to 'disabled') when diagnostic is not
> > +          needed.
> > +          Diagnostic mode:
> > +            - disabled:
> > +                Diagnostic disabled (ie. normal operation)
> > +            - echo:
> > +                Automatic echo. Rx data is resent on Tx.
> > +            - internal-loopback:
> > +                The TDM transmitter is connected to the receiver. Data appears
> > +                on Tx pin.
> > +            - control-loopback:
> > +                The TDM transmitter is connected to the receiver. The Tx pin is
> > +                disconnected.
> > +
> > +      fsl,rx-frame-sync-delay-bits:
> > +        enum: [0, 1, 2, 3]
> > +        default: 0
> > +        description: |
> > +          Receive frame sync delay in number of bits.
> > +          Indicates the delay between the Rx sync and the first bit of the Rx
> > +          frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
> > +
> > +      fsl,tx-frame-sync-delay-bits:
> > +        enum: [0, 1, 2, 3]
> > +        default: 0
> > +        description: |
> > +          Transmit frame sync delay in number of bits.
> > +          Indicates the delay between the Tx sync and the first bit of the Tx
> > +          frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
> > +
> > +      fsl,clock-falling-edge:
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +        description:
> > +          Data is sent on falling edge of the clock (and received on the rising
> > +          edge). If 'clock-falling-edge' is not present, data is sent on the
> > +          rising edge (and received on the falling edge).
> > +
> > +      fsl,fsync-rising-edge:
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +        description:
> > +          Frame sync pulses are sampled with the rising edge of the channel
> > +          clock. If 'fsync-rising-edge' is not present, pulses are sampled with
> > +          the falling edge.
> > +
> > +      fsl,double-speed-clock:
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +        description:
> > +          The channel clock is twice the data rate.
> > +
> > +      fsl,tx-ts-routes:
> > +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > +        description: |
> > +          A list of tupple that indicates the Tx time-slots routes.  
> 
> tuple

Will be fixed in next iteration.

> 
> > +            tx_ts_routes =  
> 
> Not the property name. Put an example in the example(s).

Oups, should be fsl,tx-ts-routes.
An example is already present in the example section.
I will remove this example from the description in the next iteration.

> 
> > +               < 2 0 >, /* The first 2 time slots are not used */
> > +               < 3 1 >, /* The next 3 ones are route to SCC2 */
> > +               < 4 0 >, /* The next 4 ones are not used */
> > +               < 2 2 >; /* The nest 2 ones are route to SCC3 */
> > +        items:
> > +          items:
> > +            - description:
> > +                The number of time-slots
> > +              minimum: 1
> > +              maximum: 64
> > +            - description: |
> > +                The source serial interface (dt-bindings/soc/fsl,tsa.h defines
> > +                these values)
> > +                 - 0: No destination
> > +                 - 1: SCC2
> > +                 - 2: SCC3
> > +                 - 3: SCC4
> > +                 - 4: SMC1
> > +                 - 5: SMC2
> > +              enum: [0, 1, 2, 3, 4, 5]
> > +        minItems: 1
> > +        maxItems: 64
> > +
> > +      fsl,rx-ts-routes:  
> 
> You could make these a pattern instead of duplicating the constraints: 
> 
> '^fsl,[rt]x-ts-routes$'

Yes, I will use the pattern to handle tx and rx.
As mentionned in fsl,tx-ts-routes, I will remove the example from the
description as examples are already present in the example section.

> 
> > +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > +        description: |
> > +          A list of tupple that indicates the Rx time-slots routes.
> > +            tx_ts_routes =
> > +               < 2 0 >, /* The first 2 time slots are not used */
> > +               < 3 1 >, /* The next 3 ones are route from SCC2 */
> > +               < 4 0 >, /* The next 4 ones are not used */
> > +               < 2 2 >; /* The nest 2 ones are route from SCC3 */
> > +        items:
> > +          items:
> > +            - description:
> > +                The number of time-slots
> > +              minimum: 1
> > +              maximum: 64
> > +            - description: |
> > +                The destination serial interface (dt-bindings/soc/fsl,tsa.h
> > +                defines these values)
> > +                 - 0: No destination
> > +                 - 1: SCC2
> > +                 - 2: SCC3
> > +                 - 3: SCC4
> > +                 - 4: SMC1
> > +                 - 5: SMC2
> > +              enum: [0, 1, 2, 3, 4, 5]
> > +        minItems: 1
> > +        maxItems: 64
> > +
> > +    allOf:
> > +      # If fsl,common-rxtx-pins is present, only 2 clocks are needed.
> > +      # Else, the 4 clocks must be present.
> > +      - if:
> > +          required:
> > +            - fsl,common-rxtx-pins
> > +        then:
> > +          properties:
> > +            clocks:
> > +              maxItems: 2
> > +            clock-names:
> > +              maxItems: 2
> > +        else:
> > +          properties:
> > +            clocks:
> > +              minItems: 4
> > +            clock-names:
> > +              minItems: 4
> > +
> > +    required:
> > +      - reg
> > +      - clocks
> > +      - clock-names
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - '#address-cells'
> > +  - '#size-cells'
> > +  - '#serial-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/soc/fsl,tsa.h>
> > +
> > +    tsa at ae0 {
> > +        compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa";
> > +        reg = <0xae0 0x10>,
> > +              <0xc00 0x200>;
> > +        reg-names = "si_regs", "si_ram";
> > +
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +        #serial-cells = <1>;
> > +
> > +        tdm at 0 {
> > +            /* TDMa */
> > +            reg = <0>;
> > +
> > +            clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
> > +            clock-names = "l1rsync", "l1rclk";
> > +
> > +            fsl,common-rxtx-pins;
> > +            fsl,fsync-rising-edge;
> > +
> > +            fsl,tx-ts-routes = < 2 0 >,             /* TS 0..1 */
> > +                           < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */
> > +                           < 1 0 >,                 /* TS 26 */
> > +                           < 5 FSL_CPM_TSA_SCC3 >;  /* TS 27..31 */
> > +
> > +            fsl,rx-ts-routes = < 2 0 >,             /* TS 0..1 */
> > +                           < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */
> > +                           < 1 0 >,                 /* TS 26 */
> > +                           < 5 FSL_CPM_TSA_SCC3 >;  /* TS 27..31 */
> > +        };
> > +    };
> > diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h
> > new file mode 100644
> > index 000000000000..2cc44e867dbe
> > --- /dev/null
> > +++ b/include/dt-bindings/soc/fsl,tsa.h
> > @@ -0,0 +1,13 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +
> > +#ifndef __DT_BINDINGS_SOC_FSL_TSA_H
> > +#define __DT_BINDINGS_SOC_FSL_TSA_H
> > +
> > +#define FSL_CPM_TSA_NU		0	/* Pseuso Cell Id for not used item */
> > +#define FSL_CPM_TSA_SCC2	1
> > +#define FSL_CPM_TSA_SCC3	2
> > +#define FSL_CPM_TSA_SCC4	3
> > +#define FSL_CPM_TSA_SMC1	4
> > +#define FSL_CPM_TSA_SMC2	5
> > +
> > +#endif
> > -- 
> > 2.39.0
> >   

Thanks for the review,
Hervé

-- 
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com


More information about the Linuxppc-dev mailing list