[PATCH] of: Make of framebuffer devices unique

Michal Suchánek msuchanek at suse.de
Thu Jan 19 20:01:43 AEDT 2023


On Thu, Jan 19, 2023 at 09:00:44AM +0100, Thomas Zimmermann wrote:
> Hi Michal,
> 
> thanks for fixing this issue. But the review time was way too short. Please
> see my comments below.
> 
> Am 18.01.23 um 22:46 schrieb Michal Suchánek:
> > On Wed, Jan 18, 2023 at 09:13:05PM +0100, Erhard F. wrote:
> > > On Tue, 17 Jan 2023 17:58:04 +0100
> > > Michal Suchanek <msuchanek at suse.de> wrote:
> > > 
> > > > Since Linux 5.19 this error is observed:
> > > > 
> > > > sysfs: cannot create duplicate filename '/devices/platform/of-display'
> > > > 
> > > > This is because multiple devices with the same name 'of-display' are
> > > > created on the same bus.
> > > > 
> > > > Update the code to create numbered device names for the non-boot
> > > > disaplay.
> > > > 
> > > > cc: linuxppc-dev at lists.ozlabs.org
> > > > References: https://bugzilla.kernel.org/show_bug.cgi?id=216095
> > > > Fixes: 52b1b46c39ae ("of: Create platform devices for OF framebuffers")
> > > > Reported-by: Erhard F. <erhard_f at mailbox.org>
> > > > Suggested-by: Thomas Zimmermann <tzimmermann at suse.de>
> > > > Signed-off-by: Michal Suchanek <msuchanek at suse.de>
> > > > ---
> > > >   drivers/of/platform.c | 8 +++++++-
> > > >   1 file changed, 7 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> > > > index 81c8c227ab6b..f2a5d679a324 100644
> > > > --- a/drivers/of/platform.c
> > > > +++ b/drivers/of/platform.c
> > > > @@ -525,6 +525,7 @@ static int __init of_platform_default_populate_init(void)
> > > >   	if (IS_ENABLED(CONFIG_PPC)) {
> > > >   		struct device_node *boot_display = NULL;
> > > >   		struct platform_device *dev;
> > > > +		int display_number = 1;
> > > >   		int ret;
> > > >   		/* Check if we have a MacOS display without a node spec */
> > > > @@ -561,10 +562,15 @@ static int __init of_platform_default_populate_init(void)
> > > >   			boot_display = node;
> > > >   			break;
> > > >   		}
> > > > +
> > > >   		for_each_node_by_type(node, "display") {
> > > > +			char *buf[14];
> > > >   			if (!of_get_property(node, "linux,opened", NULL) || node == boot_display)
> > > >   				continue;
> > > > -			of_platform_device_create(node, "of-display", NULL);
> > > > +			ret = snprintf(buf, "of-display-%d", display_number++);
> 
> Platform devices use a single dot (.) as separator before the index.
> Counting starts at zero. See /sys/bus/platform/ for examples. Can we please
> stick with that scheme? Generated names would then be of-display.0,
> of-display.1, etc.

Yes, there was surprisingly no bikeshedding.

Do we also want to change the name of the device that did manage to
instantiate before?

This scheme changes the name only for those that did not in the past,
hence "of-display" and "of-display-%d", starting from 1.

Sure, replacing '-' with '.' is easy enough, and using the same format
for both as well.

Thanks

Michal

> 
> Best regards
> Thomas
> 
> 
> 
> > > > +			if (ret >= sizeof(buf))
> > > > +				continue;
> > > > +			of_platform_device_create(node, buf, NULL);
> > > >   		}
> > > >   	} else {
> > > > -- 
> > > > 2.35.3
> > > > 
> > > 
> > > Thank you for the patch Michal!
> > > 
> > > It applies on 6.2-rc4 but I get this build error with my config:
> > 
> > Indeed, it's doubly bad.
> > 
> > Where is the kernel test robot when you need it?
> > 
> > It should not be that easy to miss this file but clearly it can happen.
> > 
> > I will send a fixup.
> > 
> > Sorry about the mess.
> > 
> > Thanks
> > 
> > Michal
> 
> -- 
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Maxfeldstr. 5, 90409 Nürnberg, Germany
> (HRB 36809, AG Nürnberg)
> Geschäftsführer: Ivo Totev





More information about the Linuxppc-dev mailing list