[PATCH v2 01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller
Herve Codina
herve.codina at bootlin.com
Sat Jan 7 03:37:37 AEDT 2023
Add support for the time slot assigner (TSA)
available in some PowerQUICC SoC such as MPC885
or MPC866.
Signed-off-by: Herve Codina <herve.codina at bootlin.com>
---
.../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml | 262 ++++++++++++++++++
include/dt-bindings/soc/fsl-tsa.h | 15 +
2 files changed, 277 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
create mode 100644 include/dt-bindings/soc/fsl-tsa.h
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
new file mode 100644
index 000000000000..7542c0fd8435
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC CPM Time-slot assigner (TSA) controller
+
+maintainers:
+ - Herve Codina <herve.codina at bootlin.com>
+
+description: |
+ The TSA is the time-slot assigner that can be found on some
+ PowerQUICC SoC.
+ Its purpose is to route some TDM time-slots to other internal
+ serial controllers.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,mpc885-tsa
+ - fsl,mpc866-tsa
+ - const: fsl,cpm1-tsa
+
+ reg:
+ items:
+ - description: SI (Serial Interface) register base
+ - description: SI RAM base
+
+ reg-names:
+ items:
+ - const: si_regs
+ - const: si_ram
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^tdm@[0-1]$":
+ description:
+ The TDM managed by this controller
+ type: object
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 1
+ description:
+ The TDM number for this TDM, 0 for TDMa and 1 for TDMb
+
+ fsl,common-rxtx-pins:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Use common pins for both transmit and receive
+
+ clocks: true
+ clock-names: true
+
+ fsl,mode:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [normal, echo, internal-loopback, control-loopback]
+ default: normal
+ description: |
+ Operational mode:
+ - normal:
+ Normal operation
+ - echo:
+ Automatic echo. Rx data is resent on Tx
+ - internal-loopback:
+ The TDM transmitter is connected to the receiver.
+ Data appears on Tx pin.
+ - control-loopback:
+ The TDM transmitter is connected to the receiver.
+ The Tx pin is disconnected.
+
+ fsl,rx-frame-sync-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Receive frame sync delay.
+ Indicates the delay between the Rx sync and the first bit of the
+ Rx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
+
+ fsl,tx-frame-sync-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ Transmit frame sync delay.
+ Indicates the delay between the Tx sync and the first bit of the
+ Tx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
+
+ fsl,clock-falling-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Data is sent on falling edge of the clock (and received on the
+ rising edge).
+ If 'clock-falling-edge' is not present, data is sent on the
+ rising edge (and received on the falling edge).
+
+ fsl,fsync-rising-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Frame sync pulses are sampled with the rising edge of the channel
+ clock. If 'fsync-rising-edge' is not present, pulses are sample
+ with e falling edge.
+
+ fsl,double-speed-clock:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The channel clock is twice the data rate.
+
+ fsl,grant-mode:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Grant mode enabled.
+
+ tx_ts_routes:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ A list of tupple that indicates the Tx time-slots routes.
+ tx_ts_routes =
+ < 2 0 0>, /* The first 2 time slots are not used */
+ < 3 1 0>, /* The next 3 ones are route to SCC2 */
+ < 4 0 0>, /* The next 4 ones are not used */
+ < 2 2 0>; /* The nest 2 ones are route to SCC3 */
+ items:
+ items:
+ - description:
+ The number of time-slots
+ minimum: 1
+ maximum: 64
+ - description: |
+ The source serial interface (dt-bindings/soc/fsl-tsa.h
+ defines these values)
+ - 0: No destination
+ - 1: SCC2
+ - 2: SCC3
+ - 3: SCC4
+ - 4: SMC1
+ - 5: SMC2
+ enum: [0, 1, 2, 3, 4, 5]
+ - description:
+ The route flags (reserved)
+ const: 0
+ minItems: 1
+ maxItems: 64
+
+ rx_ts_routes:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ A list of tupple that indicates the Rx time-slots routes.
+ tx_ts_routes =
+ < 2 0 0>, /* The first 2 time slots are not used */
+ < 3 1 0>, /* The next 3 ones are route from SCC2 */
+ < 4 0 0>, /* The next 4 ones are not used */
+ < 2 2 0>; /* The nest 2 ones are route from SCC3 */
+ items:
+ items:
+ - description:
+ The number of time-slots
+ minimum: 1
+ maximum: 64
+ - description: |
+ The destination serial interface (dt-bindings/soc/fsl-tsa.h
+ defines these values)
+ - 0: No destination
+ - 1: SCC2
+ - 2: SCC3
+ - 3: SCC4
+ - 4: SMC1
+ - 5: SMC2
+ enum: [0, 1, 2, 3, 4, 5]
+ - description:
+ The route flags (reserved)
+ const: 0
+ minItems: 1
+ maxItems: 64
+
+ allOf:
+ - if:
+ properties:
+ fsl,common-rxtx-pins:
+ type: 'null'
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External clock connected to L1RSYNC pin
+ - description: External clock connected to L1RCLK pin
+ - description: External clock connected to L1TSYNC pin
+ - description: External clock connected to L1TCLK pin
+ clock-names:
+ items:
+ - const: l1rsync
+ - const: l1rclk
+ - const: l1tsync
+ - const: l1tclk
+ else:
+ properties:
+ clocks:
+ items:
+ - description: External clock connected to L1RSYNC pin
+ - description: External clock connected to L1RCLK pin
+ clock-names:
+ items:
+ - const: l1rsync
+ - const: l1rclk
+
+ required:
+ - reg
+ - clocks
+ - clock-names
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/fsl-tsa.h>
+
+ tsa at ae0 {
+ compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa";
+ reg = <0xae0 0x10>,
+ <0xc00 0x200>;
+ reg-names = "si_regs", "si_ram";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tdm at 0 {
+ /* TDMa */
+ reg = <0>;
+
+ clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
+ clock-names = "l1rsync", "l1rclk";
+
+ fsl,common-rxtx-pins;
+ fsl,fsync-rising-edge;
+
+ tx_ts_routes = < 2 0 0>, /* TS 0..1 */
+ < 24 FSL_CPM_TSA_SCC4 0>, /* TS 2..25 */
+ < 1 0 0>, /* TS 26 */
+ < 5 FSL_CPM_TSA_SCC3 0>; /* TS 27..31 */
+
+ rx_ts_routes = < 2 0 0>, /* TS 0..1 */
+ < 24 FSL_CPM_TSA_SCC4 0>, /* 2..25 */
+ < 1 0 0>, /* TS 26 */
+ < 5 FSL_CPM_TSA_SCC3 0>; /* TS 27..31 */
+ };
+ };
diff --git a/include/dt-bindings/soc/fsl-tsa.h b/include/dt-bindings/soc/fsl-tsa.h
new file mode 100644
index 000000000000..9d09468694a2
--- /dev/null
+++ b/include/dt-bindings/soc/fsl-tsa.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT */
+
+#ifndef __DT_BINDINGS_SOC_FSL_TSA_H
+#define __DT_BINDINGS_SOC_FSL_TSA_H
+
+#define FSL_CPM_TSA_NU 0 /* Pseuso Cell Id for not used item */
+#define FSL_CPM_TSA_SCC2 1
+#define FSL_CPM_TSA_SCC3 2
+#define FSL_CPM_TSA_SCC4 3
+#define FSL_CPM_TSA_SMC1 4
+#define FSL_CPM_TSA_SMC2 5
+
+#define FSL_CPM_TSA_NBCELL 6
+
+#endif
--
2.38.1
More information about the Linuxppc-dev
mailing list