[PATCH 4/4] powerpc: drop MPC832x_MDS platform support
Paul Gortmaker
paul.gortmaker at windriver.com
Mon Feb 20 22:59:13 AEDT 2023
This final variant in the e300 family of Modular Development System
(MDS) in this series was actually aimed at feature reduction - things
like floating point and ethernet were removed in order to make for a
lower power and lower cost system.
Like all the MDS systems, it was meant as a vehicle to get the CPU out
early to hardware OEMs so software and board development could take place
in parallel.
These were made in limited numbers and availability preference was given
to partners who were planning to make their own boards.
Given that the whole reason for existence was to assist in enabling new
board designs [not happening for 10+ years], and that they weren't
generally available, and that the hardware wasn't really hobbyist friendly
even for retro computing, it makes sense to retire the support for this
particular platform.
Cc: Scott Wood <oss at buserror.net>
Cc: Michael Ellerman <mpe at ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Cc: Paul Mackerras <paulus at samba.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
---
arch/powerpc/boot/dts/mpc832x_mds.dts | 436 ------------------
.../configs/83xx/mpc832x_mds_defconfig | 59 ---
arch/powerpc/configs/mpc83xx_defconfig | 1 -
arch/powerpc/configs/ppc6xx_defconfig | 1 -
arch/powerpc/platforms/83xx/Kconfig | 7 -
arch/powerpc/platforms/83xx/Makefile | 1 -
arch/powerpc/platforms/83xx/mpc832x_mds.c | 110 -----
7 files changed, 615 deletions(-)
delete mode 100644 arch/powerpc/boot/dts/mpc832x_mds.dts
delete mode 100644 arch/powerpc/configs/83xx/mpc832x_mds_defconfig
delete mode 100644 arch/powerpc/platforms/83xx/mpc832x_mds.c
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
deleted file mode 100644
index 3af073f01e71..000000000000
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ /dev/null
@@ -1,436 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8323E EMDS Device Tree Source
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- *
-
- * To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do
- * this:
- *
- * 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board.
- * 2) Solder a wire from U61-21 to P19A-23. P19 is a grid of pins on the board
- * next to the serial ports.
- * 3) Solder a wire from U61-22 to P19K-22.
- *
- * Note that there's a typo in the schematic. The board labels the last column
- * of pins "P19K", but in the schematic, that column is called "P19J". So if
- * you're going by the schematic, the pin is called "P19J-K22".
- */
-
-/dts-v1/;
-
-/ {
- model = "MPC8323EMDS";
- compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8323 at 0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <16384>; // L1, 16K
- i-cache-size = <16384>; // L1, 16K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x08000000>;
- };
-
- bcsr at f8000000 {
- compatible = "fsl,mpc8323mds-bcsr";
- reg = <0xf8000000 0x8000>;
- };
-
- soc8323 at e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x00100000>;
- reg = <0xe0000000 0x00000200>;
- bus-frequency = <132000000>;
-
- wdt at 200 {
- device_type = "watchdog";
- compatible = "mpc83xx_wdt";
- reg = <0x200 0x100>;
- };
-
- pmc: power at b00 {
- compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
- reg = <0xb00 0x100 0xa00 0x100>;
- interrupts = <80 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- i2c at 3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <14 0x8>;
- interrupt-parent = <&ipic>;
- dfsrr;
-
- rtc at 68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- };
- };
-
- serial0: serial at 4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <9 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- serial1: serial at 4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <10 0x8>;
- interrupt-parent = <&ipic>;
- };
-
- dma at 82a8 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
- reg = <0x82a8 4>;
- ranges = <0 0x8100 0x1a8>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- cell-index = <0>;
- dma-channel at 0 {
- compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
- reg = <0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel at 80 {
- compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel at 100 {
- compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- dma-channel at 180 {
- compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
- reg = <0x180 0x28>;
- cell-index = <3>;
- interrupt-parent = <&ipic>;
- interrupts = <71 8>;
- };
- };
-
- crypto at 30000 {
- compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <11 0x8>;
- interrupt-parent = <&ipic>;
- fsl,num-channels = <1>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x4c>;
- fsl,descriptor-types-mask = <0x0122003f>;
- sleep = <&pmc 0x03000000>;
- };
-
- ipic: pic at 700 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x700 0x100>;
- device_type = "ipic";
- };
-
- par_io at 1400 {
- reg = <0x1400 0x100>;
- device_type = "par_io";
- num-ports = <7>;
-
- pio3: ucc_pin at 3 {
- pio-map = <
- /* port pin dir open_drain assignment has_irq */
- 3 4 3 0 2 0 /* MDIO */
- 3 5 1 0 2 0 /* MDC */
- 0 13 2 0 1 0 /* RX_CLK (CLK9) */
- 3 24 2 0 1 0 /* TX_CLK (CLK10) */
- 1 0 1 0 1 0 /* TxD0 */
- 1 1 1 0 1 0 /* TxD1 */
- 1 2 1 0 1 0 /* TxD2 */
- 1 3 1 0 1 0 /* TxD3 */
- 1 4 2 0 1 0 /* RxD0 */
- 1 5 2 0 1 0 /* RxD1 */
- 1 6 2 0 1 0 /* RxD2 */
- 1 7 2 0 1 0 /* RxD3 */
- 1 8 2 0 1 0 /* RX_ER */
- 1 9 1 0 1 0 /* TX_ER */
- 1 10 2 0 1 0 /* RX_DV */
- 1 11 2 0 1 0 /* COL */
- 1 12 1 0 1 0 /* TX_EN */
- 1 13 2 0 1 0>; /* CRS */
- };
- pio4: ucc_pin at 4 {
- pio-map = <
- /* port pin dir open_drain assignment has_irq */
- 3 31 2 0 1 0 /* RX_CLK (CLK7) */
- 3 6 2 0 1 0 /* TX_CLK (CLK8) */
- 1 18 1 0 1 0 /* TxD0 */
- 1 19 1 0 1 0 /* TxD1 */
- 1 20 1 0 1 0 /* TxD2 */
- 1 21 1 0 1 0 /* TxD3 */
- 1 22 2 0 1 0 /* RxD0 */
- 1 23 2 0 1 0 /* RxD1 */
- 1 24 2 0 1 0 /* RxD2 */
- 1 25 2 0 1 0 /* RxD3 */
- 1 26 2 0 1 0 /* RX_ER */
- 1 27 1 0 1 0 /* TX_ER */
- 1 28 2 0 1 0 /* RX_DV */
- 1 29 2 0 1 0 /* COL */
- 1 30 1 0 1 0 /* TX_EN */
- 1 31 2 0 1 0>; /* CRS */
- };
- pio5: ucc_pin at 5 {
- pio-map = <
- /*
- * open has
- * port pin dir drain sel irq
- */
- 2 0 1 0 2 0 /* TxD5 */
- 2 8 2 0 2 0 /* RxD5 */
-
- 2 29 2 0 0 0 /* CTS5 */
- 2 31 1 0 2 0 /* RTS5 */
-
- 2 24 2 0 0 0 /* CD */
-
- >;
- };
-
- };
- };
-
- qe at e0100000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
- ranges = <0x0 0xe0100000 0x00100000>;
- reg = <0xe0100000 0x480>;
- brg-frequency = <0>;
- bus-frequency = <198000000>;
- fsl,qe-num-riscs = <1>;
- fsl,qe-num-snums = <28>;
-
- muram at 10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x00010000 0x00004000>;
-
- data-only at 0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x4000>;
- };
- };
-
- spi at 4c0 {
- cell-index = <0>;
- compatible = "fsl,spi";
- reg = <0x4c0 0x40>;
- interrupts = <2>;
- interrupt-parent = <&qeic>;
- mode = "cpu";
- };
-
- spi at 500 {
- cell-index = <1>;
- compatible = "fsl,spi";
- reg = <0x500 0x40>;
- interrupts = <1>;
- interrupt-parent = <&qeic>;
- mode = "cpu";
- };
-
- usb at 6c0 {
- compatible = "qe_udc";
- reg = <0x6c0 0x40 0x8b00 0x100>;
- interrupts = <11>;
- interrupt-parent = <&qeic>;
- mode = "slave";
- };
-
- enet0: ucc at 2200 {
- device_type = "network";
- compatible = "ucc_geth";
- cell-index = <3>;
- reg = <0x2200 0x200>;
- interrupts = <34>;
- interrupt-parent = <&qeic>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- rx-clock-name = "clk9";
- tx-clock-name = "clk10";
- phy-handle = <&phy3>;
- pio-handle = <&pio3>;
- };
-
- enet1: ucc at 3200 {
- device_type = "network";
- compatible = "ucc_geth";
- cell-index = <4>;
- reg = <0x3200 0x200>;
- interrupts = <35>;
- interrupt-parent = <&qeic>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- rx-clock-name = "clk7";
- tx-clock-name = "clk8";
- phy-handle = <&phy4>;
- pio-handle = <&pio4>;
- };
-
- ucc at 2400 {
- device_type = "serial";
- compatible = "ucc_uart";
- cell-index = <5>; /* The UCC number, 1-7*/
- port-number = <0>; /* Which ttyQEx device */
- soft-uart; /* We need Soft-UART */
- reg = <0x2400 0x200>;
- interrupts = <40>; /* From Table 18-12 */
- interrupt-parent = < &qeic >;
- /*
- * For Soft-UART, we need to set TX to 1X, which
- * means specifying separate clock sources.
- */
- rx-clock-name = "brg5";
- tx-clock-name = "brg6";
- pio-handle = < &pio5 >;
- };
-
-
- mdio at 2320 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x2320 0x18>;
- compatible = "fsl,ucc-mdio";
-
- phy3: ethernet-phy at 3 {
- interrupt-parent = <&ipic>;
- interrupts = <17 0x8>;
- reg = <0x3>;
- };
- phy4: ethernet-phy at 4 {
- interrupt-parent = <&ipic>;
- interrupts = <18 0x8>;
- reg = <0x4>;
- };
- };
-
- qeic: interrupt-controller at 80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- big-endian;
- interrupts = <32 0x8 33 0x8>; //high:32 low:33
- interrupt-parent = <&ipic>;
- };
- };
-
- pci0: pci at e0008500 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 AD17 */
- 0x8800 0x0 0x0 0x1 &ipic 20 0x8
- 0x8800 0x0 0x0 0x2 &ipic 21 0x8
- 0x8800 0x0 0x0 0x3 &ipic 22 0x8
- 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
- /* IDSEL 0x12 AD18 */
- 0x9000 0x0 0x0 0x1 &ipic 22 0x8
- 0x9000 0x0 0x0 0x2 &ipic 23 0x8
- 0x9000 0x0 0x0 0x3 &ipic 20 0x8
- 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
- /* IDSEL 0x13 AD19 */
- 0x9800 0x0 0x0 0x1 &ipic 23 0x8
- 0x9800 0x0 0x0 0x2 &ipic 20 0x8
- 0x9800 0x0 0x0 0x3 &ipic 21 0x8
- 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
- /* IDSEL 0x15 AD21*/
- 0xa800 0x0 0x0 0x1 &ipic 20 0x8
- 0xa800 0x0 0x0 0x2 &ipic 21 0x8
- 0xa800 0x0 0x0 0x3 &ipic 22 0x8
- 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
- /* IDSEL 0x16 AD22*/
- 0xb000 0x0 0x0 0x1 &ipic 23 0x8
- 0xb000 0x0 0x0 0x2 &ipic 20 0x8
- 0xb000 0x0 0x0 0x3 &ipic 21 0x8
- 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
- /* IDSEL 0x17 AD23*/
- 0xb800 0x0 0x0 0x1 &ipic 22 0x8
- 0xb800 0x0 0x0 0x2 &ipic 23 0x8
- 0xb800 0x0 0x0 0x3 &ipic 20 0x8
- 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
- /* IDSEL 0x18 AD24*/
- 0xc000 0x0 0x0 0x1 &ipic 21 0x8
- 0xc000 0x0 0x0 0x2 &ipic 22 0x8
- 0xc000 0x0 0x0 0x3 &ipic 23 0x8
- 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
- interrupt-parent = <&ipic>;
- interrupts = <66 0x8>;
- bus-range = <0x0 0x0>;
- ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
- 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xd0000000 0x0 0x00100000>;
- clock-frequency = <0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008500 0x100 /* internal registers */
- 0xe0008300 0x8>; /* config space access registers */
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- sleep = <&pmc 0x00010000>;
- };
-};
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
deleted file mode 100644
index e94555452fb2..000000000000
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_83xx=y
-CONFIG_MPC832x_MDS=y
-CONFIG_MATH_EMULATION=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_UCC_GETH=y
-CONFIG_DAVICOM_PHY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_WATCHDOG=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1374=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 943c2d51bb60..8779f03bced1 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -11,7 +11,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
CONFIG_MPC831x_RDB=y
-CONFIG_MPC832x_MDS=y
CONFIG_MPC832x_RDB=y
CONFIG_MPC834x_ITX=y
CONFIG_MPC836x_RDK=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index f08a7f43c629..a1f6c5f39ccf 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -44,7 +44,6 @@ CONFIG_EP8248E=y
CONFIG_MGCOGE=y
CONFIG_PPC_83xx=y
CONFIG_MPC831x_RDB=y
-CONFIG_MPC832x_MDS=y
CONFIG_MPC832x_RDB=y
CONFIG_MPC834x_ITX=y
CONFIG_MPC836x_RDK=y
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 978d2b12e97c..d355ad40995f 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -25,13 +25,6 @@ config MPC831x_RDB
help
This option enables support for the MPC8313 RDB and MPC8315 RDB boards.
-config MPC832x_MDS
- bool "Freescale MPC832x MDS"
- select DEFAULT_UIMAGE
- select PPC_MPC832x
- help
- This option enables support for the MPC832x MDS evaluation board.
-
config MPC832x_RDB
bool "Freescale MPC832x RDB"
select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 0c3a5067bd77..6b4013e01b3b 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
obj-$(CONFIG_MPC836x_RDK) += mpc836x_rdk.o
-obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o
obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o
obj-$(CONFIG_ASP834x) += asp834x.o
obj-$(CONFIG_KMETER1) += km83xx.o
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
deleted file mode 100644
index 435344405d2c..000000000000
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Description:
- * MPC832xE MDS board specific routines.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-
-#include <linux/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ipic.h>
-#include <asm/irq.h>
-#include <asm/udbg.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <soc/fsl/qe/qe.h>
-
-#include "mpc83xx.h"
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init mpc832x_sys_setup_arch(void)
-{
- struct device_node *np;
- u8 __iomem *bcsr_regs = NULL;
-
- mpc83xx_setup_arch();
-
- /* Map BCSR area */
- np = of_find_node_by_name(NULL, "bcsr");
- if (np) {
- struct resource res;
-
- of_address_to_resource(np, 0, &res);
- bcsr_regs = ioremap(res.start, resource_size(&res));
- of_node_put(np);
- }
-
-#ifdef CONFIG_QUICC_ENGINE
- if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
- par_io_init(np);
- of_node_put(np);
-
- for_each_node_by_name(np, "ucc")
- par_io_of_config(np);
- }
-
- if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
- != NULL){
- /* Reset the Ethernet PHYs */
-#define BCSR8_FETH_RST 0x50
- clrbits8(&bcsr_regs[8], BCSR8_FETH_RST);
- udelay(1000);
- setbits8(&bcsr_regs[8], BCSR8_FETH_RST);
- iounmap(bcsr_regs);
- of_node_put(np);
- }
-#endif /* CONFIG_QUICC_ENGINE */
-}
-
-machine_device_initcall(mpc832x_mds, mpc83xx_declare_of_platform_devices);
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init mpc832x_sys_probe(void)
-{
- return of_machine_is_compatible("MPC832xMDS");
-}
-
-define_machine(mpc832x_mds) {
- .name = "MPC832x MDS",
- .probe = mpc832x_sys_probe,
- .setup_arch = mpc832x_sys_setup_arch,
- .discover_phbs = mpc83xx_setup_pci,
- .init_IRQ = mpc83xx_ipic_init_IRQ,
- .get_irq = ipic_get_irq,
- .restart = mpc83xx_restart,
- .time_init = mpc83xx_time_init,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
-};
--
2.17.1
More information about the Linuxppc-dev
mailing list