[PATCH] powerpc/eeh: Set channel state after notifying the drivers

Ganesh Goudar ganeshgr at linux.ibm.com
Thu Feb 9 21:56:49 AEDT 2023


When a PCI error is encountered 6th time in an hour we
set the channel state to perm_failure and notify the
driver about the permanent failure.

However, after upstream commit 38ddc011478e ("powerpc/eeh:
Make permanently failed devices non-actionable"), EEH handler
stops calling any routine once the device is marked as
permanent failure. This issue can lead to fatal consequences
like kernel hang with certain PCI devices.

Following log is observed with lpfc driver, with and without
this change, Without this change kernel hangs, If PCI error
is encountered 6 times for a device in an hour.

Without the change

 EEH: Beginning: 'error_detected(permanent failure)'
 PCI 0132:60:00.0#600000: EEH: not actionable (1,1,1)
 PCI 0132:60:00.1#600000: EEH: not actionable (1,1,1)
 EEH: Finished:'error_detected(permanent failure)'

With the change

 EEH: Beginning: 'error_detected(permanent failure)'
 EEH: Invoking lpfc->error_detected(permanent failure)
 EEH: lpfc driver reports: 'disconnect'
 EEH: Invoking lpfc->error_detected(permanent failure)
 EEH: lpfc driver reports: 'disconnect'
 EEH: Finished:'error_detected(permanent failure)'

To fix the issue, set channel state to permanent failure after
notifying the drivers.

Fixes: 38ddc011478e ("powerpc/eeh: Make permanently failed devices non-actionable")
Suggested-by: Mahesh Salgaonkar <mahesh at linux.ibm.com>
Signed-off-by: Ganesh Goudar <ganeshgr at linux.ibm.com>
---
 arch/powerpc/kernel/eeh_driver.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index f279295179bd..438568a472d0 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -1065,10 +1065,10 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
 	eeh_slot_error_detail(pe, EEH_LOG_PERM);
 
 	/* Notify all devices that they're about to go down. */
-	eeh_set_channel_state(pe, pci_channel_io_perm_failure);
 	eeh_set_irq_state(pe, false);
 	eeh_pe_report("error_detected(permanent failure)", pe,
 		      eeh_report_failure, NULL);
+	eeh_set_channel_state(pe, pci_channel_io_perm_failure);
 
 	/* Mark the PE to be removed permanently */
 	eeh_pe_state_mark(pe, EEH_PE_REMOVED);
@@ -1185,10 +1185,10 @@ void eeh_handle_special_event(void)
 
 			/* Notify all devices to be down */
 			eeh_pe_state_clear(pe, EEH_PE_PRI_BUS, true);
-			eeh_set_channel_state(pe, pci_channel_io_perm_failure);
 			eeh_pe_report(
 				"error_detected(permanent failure)", pe,
 				eeh_report_failure, NULL);
+			eeh_set_channel_state(pe, pci_channel_io_perm_failure);
 
 			pci_lock_rescan_remove();
 			list_for_each_entry(hose, &hose_list, list_node) {
-- 
2.39.1



More information about the Linuxppc-dev mailing list