[PATCH v2 15/16] objtool/powerpc: Enable objtool to be built on ppc
Randy Dunlap
rdunlap at infradead.org
Sat Feb 4 19:19:32 AEDT 2023
Hi--
On 8/29/22 23:41, Christophe Leroy wrote:
>
>
> Le 29/08/2022 à 07:52, Sathvika Vasireddy a écrit :
>> This patch adds [stub] implementations for required
>> functions, inorder to enable objtool build on powerpc.
>
> Not all powerpc it seems, see below
>
When cross-compiling PPC32 (on x86_64), I get 3600+ of these:
/bin/sh: line 1: ./tools/objtool/objtool: No such file or directory
/bin/sh: line 1: ./tools/objtool/objtool: No such file or directory
/bin/sh: line 1: ./tools/objtool/objtool: No such file or directory
Is there some way that objtool should work when cross-compiling?
Thanks.
>>
>> Signed-off-by: Sathvika Vasireddy <sv at linux.ibm.com>
>> [Christophe Leroy: powerpc: Add missing asm/asm.h for objtool]
>> Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
>> ---
>> arch/powerpc/Kconfig | 1 +
>> arch/powerpc/include/asm/asm.h | 7 ++
>> tools/objtool/arch/powerpc/Build | 2 +
>> tools/objtool/arch/powerpc/decode.c | 74 +++++++++++++++++++
>> .../arch/powerpc/include/arch/cfi_regs.h | 11 +++
>> tools/objtool/arch/powerpc/include/arch/elf.h | 8 ++
>> .../arch/powerpc/include/arch/special.h | 21 ++++++
>> tools/objtool/arch/powerpc/special.c | 19 +++++
>> 8 files changed, 143 insertions(+)
>> create mode 100644 arch/powerpc/include/asm/asm.h
>> create mode 100644 tools/objtool/arch/powerpc/Build
>> create mode 100644 tools/objtool/arch/powerpc/decode.c
>> create mode 100644 tools/objtool/arch/powerpc/include/arch/cfi_regs.h
>> create mode 100644 tools/objtool/arch/powerpc/include/arch/elf.h
>> create mode 100644 tools/objtool/arch/powerpc/include/arch/special.h
>> create mode 100644 tools/objtool/arch/powerpc/special.c
>>
>> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>> index 4c466acdc70d..dc05cd23c233 100644
>> --- a/arch/powerpc/Kconfig
>> +++ b/arch/powerpc/Kconfig
>> @@ -237,6 +237,7 @@ config PPC
>> select HAVE_MOD_ARCH_SPECIFIC
>> select HAVE_NMI if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
>> select HAVE_OPTPROBES
>> + select HAVE_OBJTOOL if PPC32 || MPROFILE_KERNEL
>
> Why restrict it to MPROFILE_KERNEL ? In your RFC it was for all PPC64.
>
> Recent discussion on the list shows new problem with recordmcount, see
> https://lore.kernel.org/all/MW5PR84MB184250EA1CAE04497C1E7CE9AB769@MW5PR84MB1842.NAMPRD84.PROD.OUTLOOK.COM/
>
> Those ones are with ppc64 big endian, so objtool would be welcome here
> as well.
>
>> select HAVE_PERF_EVENTS
>> select HAVE_PERF_EVENTS_NMI if PPC64
>> select HAVE_PERF_REGS
>> diff --git a/arch/powerpc/include/asm/asm.h b/arch/powerpc/include/asm/asm.h
>> new file mode 100644
>> index 000000000000..86f46b604e9a
>> --- /dev/null
>> +++ b/arch/powerpc/include/asm/asm.h
>> @@ -0,0 +1,7 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +#ifndef _ASM_POWERPC_ASM_H
>> +#define _ASM_POWERPC_ASM_H
>> +
>> +#define _ASM_PTR " .long "
>> +
>> +#endif /* _ASM_POWERPC_ASM_H */
>> diff --git a/tools/objtool/arch/powerpc/Build b/tools/objtool/arch/powerpc/Build
>> new file mode 100644
>> index 000000000000..d24d5636a5b8
>> --- /dev/null
>> +++ b/tools/objtool/arch/powerpc/Build
>> @@ -0,0 +1,2 @@
>> +objtool-y += decode.o
>> +objtool-y += special.o
>> diff --git a/tools/objtool/arch/powerpc/decode.c b/tools/objtool/arch/powerpc/decode.c
>> new file mode 100644
>> index 000000000000..8b6a14680da7
>> --- /dev/null
>> +++ b/tools/objtool/arch/powerpc/decode.c
>> @@ -0,0 +1,74 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +
>> +#include <stdio.h>
>> +#include <stdlib.h>
>> +#include <objtool/check.h>
>> +#include <objtool/elf.h>
>> +#include <objtool/arch.h>
>> +#include <objtool/warn.h>
>> +#include <objtool/builtin.h>
>> +#include <objtool/endianness.h>
>> +
>> +unsigned long arch_dest_reloc_offset(int addend)
>> +{
>> + return addend;
>> +}
>> +
>> +bool arch_callee_saved_reg(unsigned char reg)
>> +{
>> + return false;
>> +}
>> +
>> +int arch_decode_hint_reg(u8 sp_reg, int *base)
>> +{
>> + exit(-1);
>> +}
>> +
>> +const char *arch_nop_insn(int len)
>> +{
>> + exit(-1);
>> +}
>> +
>> +const char *arch_ret_insn(int len)
>> +{
>> + exit(-1);
>> +}
>> +
>> +int arch_decode_instruction(struct objtool_file *file, const struct section *sec,
>> + unsigned long offset, unsigned int maxlen,
>> + unsigned int *len, enum insn_type *type,
>> + unsigned long *immediate,
>> + struct list_head *ops_list)
>> +{
>> + u32 insn;
>> +
>> + *immediate = 0;
>> + insn = bswap_if_needed(file->elf, *(u32 *)(sec->data->d_buf + offset));
>> + *len = 4;
>> + *type = INSN_OTHER;
>> +
>> + return 0;
>> +}
>> +
>> +unsigned long arch_jump_destination(struct instruction *insn)
>> +{
>> + return insn->offset + insn->immediate;
>> +}
>> +
>> +void arch_initial_func_cfi_state(struct cfi_init_state *state)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < CFI_NUM_REGS; i++) {
>> + state->regs[i].base = CFI_UNDEFINED;
>> + state->regs[i].offset = 0;
>> + }
>> +
>> + /* initial CFA (call frame address) */
>> + state->cfa.base = CFI_SP;
>> + state->cfa.offset = 0;
>> +
>> + /* initial LR (return address) */
>> + state->regs[CFI_RA].base = CFI_CFA;
>> + state->regs[CFI_RA].offset = 0;
>> +}
>> diff --git a/tools/objtool/arch/powerpc/include/arch/cfi_regs.h b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
>> new file mode 100644
>> index 000000000000..59638ebeafc8
>> --- /dev/null
>> +++ b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
>> @@ -0,0 +1,11 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +
>> +#ifndef _OBJTOOL_CFI_REGS_H
>> +#define _OBJTOOL_CFI_REGS_H
>> +
>> +#define CFI_BP 1
>> +#define CFI_SP CFI_BP
>> +#define CFI_RA 32
>> +#define CFI_NUM_REGS 33
>> +
>> +#endif
>> diff --git a/tools/objtool/arch/powerpc/include/arch/elf.h b/tools/objtool/arch/powerpc/include/arch/elf.h
>> new file mode 100644
>> index 000000000000..3c8ebb7d2a6b
>> --- /dev/null
>> +++ b/tools/objtool/arch/powerpc/include/arch/elf.h
>> @@ -0,0 +1,8 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +
>> +#ifndef _OBJTOOL_ARCH_ELF
>> +#define _OBJTOOL_ARCH_ELF
>> +
>> +#define R_NONE R_PPC_NONE
>> +
>> +#endif /* _OBJTOOL_ARCH_ELF */
>> diff --git a/tools/objtool/arch/powerpc/include/arch/special.h b/tools/objtool/arch/powerpc/include/arch/special.h
>> new file mode 100644
>> index 000000000000..ffef9ada7133
>> --- /dev/null
>> +++ b/tools/objtool/arch/powerpc/include/arch/special.h
>> @@ -0,0 +1,21 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +#ifndef _PPC_ARCH_SPECIAL_H
>> +#define _PPC_ARCH_SPECIAL_H
>> +
>> +#define EX_ENTRY_SIZE 8
>> +#define EX_ORIG_OFFSET 0
>> +#define EX_NEW_OFFSET 4
>> +
>> +#define JUMP_ENTRY_SIZE 16
>> +#define JUMP_ORIG_OFFSET 0
>> +#define JUMP_NEW_OFFSET 4
>> +#define JUMP_KEY_OFFSET 8
>> +
>> +#define ALT_ENTRY_SIZE 12
>> +#define ALT_ORIG_OFFSET 0
>> +#define ALT_NEW_OFFSET 4
>> +#define ALT_FEATURE_OFFSET 8
>> +#define ALT_ORIG_LEN_OFFSET 10
>> +#define ALT_NEW_LEN_OFFSET 11
>> +
>> +#endif /* _PPC_ARCH_SPECIAL_H */
>> diff --git a/tools/objtool/arch/powerpc/special.c b/tools/objtool/arch/powerpc/special.c
>> new file mode 100644
>> index 000000000000..d33868147196
>> --- /dev/null
>> +++ b/tools/objtool/arch/powerpc/special.c
>> @@ -0,0 +1,19 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +#include <string.h>
>> +#include <stdlib.h>
>> +#include <objtool/special.h>
>> +#include <objtool/builtin.h>
>> +
>> +
>> +bool arch_support_alt_relocation(struct special_alt *special_alt,
>> + struct instruction *insn,
>> + struct reloc *reloc)
>> +{
>> + exit(-1);
>> +}
>> +
>> +struct reloc *arch_find_switch_table(struct objtool_file *file,
>> + struct instruction *insn)
>> +{
>> + exit(-1);
>> +}
--
~Randy
More information about the Linuxppc-dev
mailing list