[PATCH v4 05/10] leds: lp3952: use devm API to cleanup module's resources
George Stark
gnstark at salutedevices.com
Fri Dec 15 04:36:09 AEDT 2023
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Also drop explicit turning LEDs off from remove() due to they will be off
anyway by led_classdev_unregister().
Signed-off-by: George Stark <gnstark at salutedevices.com>
---
drivers/leds/leds-lp3952.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/leds/leds-lp3952.c b/drivers/leds/leds-lp3952.c
index 3bd55652a706..fc0e02a9768f 100644
--- a/drivers/leds/leds-lp3952.c
+++ b/drivers/leds/leds-lp3952.c
@@ -207,6 +207,13 @@ static const struct regmap_config lp3952_regmap = {
.cache_type = REGCACHE_RBTREE,
};
+static void gpio_set_low_action(void *data)
+{
+ struct lp3952_led_array *priv = (struct lp3952_led_array *)data;
+
+ gpiod_set_value(priv->enable_gpio, 0);
+}
+
static int lp3952_probe(struct i2c_client *client)
{
int status;
@@ -226,6 +233,10 @@ static int lp3952_probe(struct i2c_client *client)
return status;
}
+ status = devm_add_action(&client->dev, gpio_set_low_action, priv);
+ if (status)
+ return status;
+
priv->regmap = devm_regmap_init_i2c(client, &lp3952_regmap);
if (IS_ERR(priv->regmap)) {
int err = PTR_ERR(priv->regmap);
@@ -254,15 +265,6 @@ static int lp3952_probe(struct i2c_client *client)
return 0;
}
-static void lp3952_remove(struct i2c_client *client)
-{
- struct lp3952_led_array *priv;
-
- priv = i2c_get_clientdata(client);
- lp3952_on_off(priv, LP3952_LED_ALL, false);
- gpiod_set_value(priv->enable_gpio, 0);
-}
-
static const struct i2c_device_id lp3952_id[] = {
{LP3952_NAME, 0},
{}
@@ -274,7 +276,6 @@ static struct i2c_driver lp3952_i2c_driver = {
.name = LP3952_NAME,
},
.probe = lp3952_probe,
- .remove = lp3952_remove,
.id_table = lp3952_id,
};
--
2.25.1
More information about the Linuxppc-dev
mailing list