[RFC v2 2/2] powerpc/selftest: Add support for cpuidle latency measurement
Aboorva Devarajan
aboorvad at linux.vnet.ibm.com
Mon Aug 28 16:15:30 AEST 2023
From: Pratik R. Sampat <psampat at linux.ibm.com>
The cpuidle latency selftest provides support to systematically extract,
analyse and present IPI and timer based wakeup latencies for each CPU
and each idle state available on the system.
The selftest leverages test_cpuidle_latency module's debugfs interface
to interact and extract latency information from the kernel.
The selftest inserts the module if already not inserted, disables all
the idle states and enables them one by one testing the following:
1. Keeping source CPU constant, iterate through all the cores and pick
a single CPU for each core measuring IPI latency for baseline
(CPU is busy with cat /dev/random > /dev/null workload) and then
when the CPU is idle.
2. Iterating through all the CPU cores and selecting one CPU for each
core, then, the expected timer durations to be equivalent to the
residency of the deepest idle state enabled is sent to the selected
target CPU, then the difference between the expected timer duration
and the time of wakeup is determined.
To run this test specifically:
$ sudo make -C tools/testing/selftests \
TARGETS="powerpc/cpuidle_latency" run_tests
There are a few optional arguments too that the script can take
[-h <help>]
[-i <run timer tests>]
[-m <location of the module>]
[-s <source cpu for ipi test>]
[-o <location of the output>]
[-v <verbose> (run on all cpus)]
Default Output location in:
tools/testing/selftests/powerpc/cpuidle_latency/cpuidle_latency.log
To run the test without re-compiling:
$ cd tools/testing/selftest/powerpc/cpuidle_latency/
$ sudo ./cpuidle_latency.sh
Signed-off-by: Pratik R. Sampat <psampat at linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad at linux.vnet.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde at linux.vnet.ibm.com>
---
tools/testing/selftests/powerpc/Makefile | 1 +
.../powerpc/cpuidle_latency/.gitignore | 2 +
.../powerpc/cpuidle_latency/Makefile | 6 +
.../cpuidle_latency/cpuidle_latency.sh | 443 ++++++++++++++++++
.../powerpc/cpuidle_latency/settings | 1 +
5 files changed, 453 insertions(+)
create mode 100644 tools/testing/selftests/powerpc/cpuidle_latency/.gitignore
create mode 100644 tools/testing/selftests/powerpc/cpuidle_latency/Makefile
create mode 100755 tools/testing/selftests/powerpc/cpuidle_latency/cpuidle_latency.sh
create mode 100644 tools/testing/selftests/powerpc/cpuidle_latency/settings
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile
index 49f2ad1793fd..efac7270ce1f 100644
--- a/tools/testing/selftests/powerpc/Makefile
+++ b/tools/testing/selftests/powerpc/Makefile
@@ -17,6 +17,7 @@ SUB_DIRS = alignment \
benchmarks \
cache_shape \
copyloops \
+ cpuidle_latency \
dexcr \
dscr \
mm \
diff --git a/tools/testing/selftests/powerpc/cpuidle_latency/.gitignore b/tools/testing/selftests/powerpc/cpuidle_latency/.gitignore
new file mode 100644
index 000000000000..987f8852dc59
--- /dev/null
+++ b/tools/testing/selftests/powerpc/cpuidle_latency/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+cpuidle_latency.log
diff --git a/tools/testing/selftests/powerpc/cpuidle_latency/Makefile b/tools/testing/selftests/powerpc/cpuidle_latency/Makefile
new file mode 100644
index 000000000000..04492b6d2582
--- /dev/null
+++ b/tools/testing/selftests/powerpc/cpuidle_latency/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+all:
+
+TEST_PROGS := cpuidle_latency.sh
+
+include ../../lib.mk
diff --git a/tools/testing/selftests/powerpc/cpuidle_latency/cpuidle_latency.sh b/tools/testing/selftests/powerpc/cpuidle_latency/cpuidle_latency.sh
new file mode 100755
index 000000000000..f7b7a9dc2e08
--- /dev/null
+++ b/tools/testing/selftests/powerpc/cpuidle_latency/cpuidle_latency.sh
@@ -0,0 +1,443 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# CPU-Idle latency selftest enables systematic retrieval and presentation
+# of IPI and timer-triggered wake-up latencies for every CPU and available
+# system idle state by leveraging the test_cpuidle_latency module.
+#
+# Author: Pratik R. Sampat <psampat at linux.ibm.com>
+# Author: Aboorva Devarajan <aboorvad at linux.ibm.com>
+
+DISABLE=1
+ENABLE=0
+
+LOG=cpuidle_latency.log
+MODULE=/lib/modules/$(uname -r)/kernel/arch/powerpc/kernel/test_cpuidle_latency.ko
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+exit_status=0
+
+RUN_TIMER_TEST=1
+TIMEOUT=1000000
+VERBOSE=0
+
+IPI_SRC_CPU=0
+
+helpme() {
+ printf "Usage: %s [-h] [-todg args]
+ [-h <help>]
+ [-s <source cpu for ipi test> (default: 0)]
+ [-m <location of the module>]
+ [-o <location of the output>]
+ [-v <verbose> (execute test across all CPU threads)]
+ [-i <run timer tests>]
+ \n" "$0"
+ exit 2
+}
+
+cpu_is_online() {
+ local cpu=$1
+ if [ ! -f "/sys/devices/system/cpu/cpu$cpu/online" ]; then
+ printf "CPU %s: file not found: /sys/devices/system/cpu/cpu%s/online" "$cpu" "$cpu"
+ return 0
+ fi
+ status=$(cat /sys/devices/system/cpu/cpu"$cpu"/online)
+ return "$status"
+}
+
+check_valid_cpu() {
+ local cpu="$1"
+ local cpu_count
+
+ cpu_count="$(nproc)" # Get the number of CPUs on the system
+
+ if [[ "$cpu" =~ ^[0-9]+$ ]]; then
+ if ((cpu >= 0 && cpu < cpu_count)); then
+ cpu_is_online "$cpu"
+ online_status=$?
+ if [ "$online_status" -eq "1" ]; then
+ return 1
+ else
+ printf "CPU %s is offline." "$cpu"
+ return 0
+ fi
+ fi
+ fi
+ return 0
+}
+
+parse_arguments() {
+ while getopts ht:m:s:o:vt:it: arg; do
+ case $arg in
+ h) # --help
+ helpme
+ ;;
+ m) # --mod-file
+ MODULE=$OPTARG
+ ;;
+ s) #
+ IPI_SRC_CPU=$OPTARG
+ check_valid_cpu "$IPI_SRC_CPU"
+ cpu_status=$?
+ if [ "$cpu_status" == "0" ]; then
+ printf "%s is an invalid CPU. Exiting.." "$IPI_SRC_CPU"
+ exit
+ fi
+ ;;
+ o) # output log files
+ LOG=$OPTARG
+ ;;
+ v) # verbose mode - execute tests across all CPU threads
+ VERBOSE=1
+ ;;
+ i) # run timer tests
+ RUN_TIMER_TEST=1
+ ;;
+ \?)
+ helpme
+ ;;
+ esac
+ done
+}
+
+ins_mod() {
+ debugfs_file=/sys/kernel/debug/powerpc/latency_test/ipi_latency_ns
+ # Check if the module is already loaded
+ if [ -f "$debugfs_file" ]; then
+ printf "Module %s already loaded\n\n" "$MODULE"
+ return 0
+ fi
+ # Try to load the module
+ if [ ! -f "$MODULE" ]; then
+ printf "%s module does not exist. Exiting\n" "$MODULE"
+ exit $ksft_skip
+ fi
+ printf "Inserting %s module\n\n" "$MODULE"
+ insmod "$MODULE"
+ if [ $? != 0 ]; then
+ printf "Insmod %s failed\n" "$MODULE"
+ exit $ksft_skip
+ fi
+}
+
+compute_average() {
+ arr=("$@")
+ sum=0
+ size=${#arr[@]}
+ if [ "$size" == 0 ]; then
+ avg=0
+ return 1
+ fi
+ for i in "${arr[@]}"; do
+ sum=$((sum + i))
+ done
+ avg=$((sum / size))
+}
+
+# Perform operation on each CPU for the given state
+# $1 - Operation: enable (0) / disable (1)
+# $2 - State to enable
+op_state() {
+ for ((cpu = 0; cpu < NUM_CPUS; cpu++)); do
+ cpu_is_online "$cpu"
+ local cpu_status=$?
+ if [ "$cpu_status" == 0 ]; then
+ continue
+ fi
+ echo "$1" >/sys/devices/system/cpu/cpu"$cpu"/cpuidle/state"$2"/disable
+ done
+}
+
+cpuidle_enable_state() {
+ state=$1
+ op_state "$ENABLE" "$state"
+}
+
+cpuidle_disable_state() {
+ state=$1
+ op_state "$DISABLE" "$state"
+}
+
+# Enable/Disable all stop states for all CPUs
+# $1 - Operation: enable (0) / disable (1)
+op_cpuidle() {
+ for ((state = 0; state < NUM_STATES; state++)); do
+ op_state "$1" "$state"
+ done
+}
+
+extract_state_information() {
+ for ((state = 0; state < NUM_STATES; state++)); do
+ state_name=$(cat /sys/devices/system/cpu/cpu"$IPI_SRC_CPU"/cpuidle/state"$state"/name)
+ state_name_arr+=("$state_name")
+ done
+}
+
+# Extract latency in microseconds and convert to nanoseconds
+extract_latency() {
+ for ((state = 0; state < NUM_STATES; state++)); do
+ latency=$(($(cat /sys/devices/system/cpu/cpu"$IPI_SRC_CPU"/cpuidle/state"$state"/latency) * 1000))
+ latency_arr+=("$latency")
+ done
+}
+
+# Simple linear search in an array
+# $1 - Element to search for
+# $2 - Array
+element_in() {
+ local item="$1"
+ shift
+ for element in "$@"; do
+ if [ "$element" == "$item" ]; then
+ return 0
+ fi
+ done
+ return 1
+}
+
+# Parse and return a cpuset with ","(individual) and "-" (range) of CPUs
+# $1 - cpuset string
+parse_cpuset() {
+ echo "$1" | awk '/-/{for (i=$1; i<=$2; i++)printf "%s%s",i,ORS;next} 1' RS=, FS=-
+}
+
+extract_core_information() {
+ declare -a thread_arr
+ for ((cpu = 0; cpu < NUM_CPUS; cpu++)); do
+ cpu_is_online "$cpu"
+ local cpu_status=$?
+ if [ "$cpu_status" == 0 ]; then
+ continue
+ fi
+
+ siblings=$(cat /sys/devices/system/cpu/cpu"$cpu"/topology/thread_siblings_list)
+ sib_arr=()
+
+ for c in $(parse_cpuset "$siblings"); do
+ sib_arr+=("$c")
+ done
+
+ if [ "$VERBOSE" == 1 ]; then
+ core_arr+=("$cpu")
+ continue
+ fi
+ element_in "${sib_arr[0]}" "${thread_arr[@]}"
+ if [ $? == 0 ]; then
+ continue
+ fi
+ core_arr+=("${sib_arr[0]}")
+
+ for thread in "${sib_arr[@]}"; do
+ thread_arr+=("$thread")
+ done
+ done
+
+ src_siblings=$(cat /sys/devices/system/cpu/cpu"$IPI_SRC_CPU"/topology/thread_siblings_list)
+ for c in $(parse_cpuset "$src_siblings"); do
+ first_core_arr+=("$c")
+ done
+}
+
+# Run the IPI test
+# $1 run for baseline - busy cpu or regular environment
+# $2 destination cpu
+ipi_test_once() {
+ dest_cpu=$2
+ if [ "$1" = "baseline" ]; then
+ # Keep the CPU busy
+ taskset -c "$dest_cpu" cat /dev/random >/dev/null &
+ task_pid=$!
+ # Wait for the workload to achieve 100% CPU usage
+ sleep 1
+ fi
+ taskset -c "$IPI_SRC_CPU" echo "$dest_cpu" >/sys/kernel/debug/powerpc/latency_test/ipi_cpu_dest
+ ipi_latency=$(cat /sys/kernel/debug/powerpc/latency_test/ipi_latency_ns)
+ src_cpu=$(cat /sys/kernel/debug/powerpc/latency_test/ipi_cpu_src)
+ if [ "$1" = "baseline" ]; then
+ kill "$task_pid"
+ wait "$task_pid" 2>/dev/null
+ fi
+}
+
+# Incrementally enable idle states one by one and compute the latency
+run_ipi_tests() {
+ extract_latency
+ # Disable idle states for CPUs
+ op_cpuidle "$DISABLE"
+
+ declare -a avg_arr
+ printf "...IPI Latency Test...\n" | tee -a "$LOG"
+
+ printf "...Baseline IPI Latency measurement: CPU Busy...\n" >>"$LOG"
+ printf "%s %10s %12s\n" "SRC_CPU" "DEST_CPU" "IPI_Latency(ns)" >>"$LOG"
+ for cpu in "${core_arr[@]}"; do
+ cpu_is_online "$cpu"
+ local cpu_status=$?
+ if [ "$cpu_status" == 0 ]; then
+ continue
+ fi
+ ipi_test_once "baseline" "$cpu"
+ printf "%-3s %10s %12s\n" "$src_cpu" "$cpu" "$ipi_latency" >>"$LOG"
+ # Skip computing latency average from the source CPU to avoid bias
+ element_in "$cpu" "${first_core_arr[@]}"
+ if [ $? == 0 ]; then
+ continue
+ fi
+ avg_arr+=("$ipi_latency")
+ done
+ compute_average "${avg_arr[@]}"
+ printf "Baseline Avg IPI latency(ns): %s\n" "$avg" | tee -a "$LOG"
+
+ for ((state = 0; state < NUM_STATES; state++)); do
+ unset avg_arr
+ printf "...Enabling state: %s...\n" "${state_name_arr[$state]}" >>"$LOG"
+ cpuidle_enable_state $state
+ printf "%s %10s %12s\n" "SRC_CPU" "DEST_CPU" "IPI_Latency(ns)" >>"$LOG"
+ for cpu in "${core_arr[@]}"; do
+ cpu_is_online "$cpu"
+ local cpu_status=$?
+ if [ "$cpu_status" == 0 ]; then
+ continue
+ fi
+ # Running IPI test and logging results
+ sleep 1
+ ipi_test_once "test" "$cpu"
+ printf "%-3s %10s %12s\n" "$src_cpu" "$cpu" "$ipi_latency" >>"$LOG"
+ # Skip computing latency average from the source CPU to avoid bias
+ element_in "$cpu" "${first_core_arr[@]}"
+ if [ $? == 0 ]; then
+ continue
+ fi
+ avg_arr+=("$ipi_latency")
+ done
+
+ compute_average "${avg_arr[@]}"
+ printf "Expected IPI latency(ns): %s\n" "${latency_arr[$state]}" >>"$LOG"
+ printf "Observed Avg IPI latency(ns) - State %s: %s\n" "${state_name_arr[$state]}" "$avg" | tee -a "$LOG"
+ cpuidle_disable_state $state
+ done
+}
+
+# Extract the residency in microseconds and convert to nanoseconds.
+# Add 200 ns so that the timer stays for a little longer than the residency
+extract_residency() {
+ for ((state = 0; state < NUM_STATES; state++)); do
+ residency=$(($(cat /sys/devices/system/cpu/cpu"$IPI_SRC_CPU"/cpuidle/state"$state"/residency) * 1000 + 200))
+ residency_arr+=("$residency")
+ done
+}
+
+# Run the Timeout test
+# $1 run for baseline - busy cpu or regular environment
+# $2 destination cpu
+# $3 timeout
+timeout_test_once() {
+ dest_cpu=$2
+ if [ "$1" = "baseline" ]; then
+ # Keep the CPU busy
+ taskset -c "$dest_cpu" cat /dev/random >/dev/null &
+ task_pid=$!
+ # Wait for the workload to achieve 100% CPU usage
+ sleep 1
+ fi
+ taskset -c "$dest_cpu" sleep 1
+ taskset -c "$dest_cpu" echo "$3" >/sys/kernel/debug/powerpc/latency_test/timeout_expected_ns
+ # Wait for the result to populate
+ sleep 0.1
+ timeout_diff=$(cat /sys/kernel/debug/powerpc/latency_test/timeout_diff_ns)
+ src_cpu=$(cat /sys/kernel/debug/powerpc/latency_test/timeout_cpu_src)
+ if [ "$1" = "baseline" ]; then
+ kill "$task_pid"
+ wait "$task_pid" 2>/dev/null
+ fi
+}
+
+run_timeout_tests() {
+ extract_residency
+ # Disable idle states for all CPUs
+ op_cpuidle "$DISABLE"
+
+ declare -a avg_arr
+ printf "\n...Timeout Latency Test...\n" | tee -a "$LOG"
+
+ printf "...Baseline Timeout Latency measurement: CPU Busy...\n" >>"$LOG"
+ printf "%s %10s\n" "Wakeup_src" "Baseline_delay(ns)" >>"$LOG"
+ for cpu in "${core_arr[@]}"; do
+ cpu_is_online "$cpu"
+ local cpu_status=$?
+ if [ "$cpu_status" == 0 ]; then
+ continue
+ fi
+ timeout_test_once "baseline" "$cpu" "$TIMEOUT"
+ printf "%-3s %13s\n" "$src_cpu" "$timeout_diff" >>"$LOG"
+ avg_arr+=("$timeout_diff")
+ done
+ compute_average "${avg_arr[@]}"
+ printf "Baseline Avg timeout diff(ns): %s\n" "$avg" | tee -a "$LOG"
+
+ for ((state = 0; state < NUM_STATES; state++)); do
+ unset avg_arr
+ printf "...Enabling state: %s...\n" "${state_name_arr["$state"]}" >>"$LOG"
+ cpuidle_enable_state "$state"
+ printf "%s %10s\n" "Wakeup_src" "Delay(ns)" >>"$LOG"
+ for cpu in "${core_arr[@]}"; do
+ cpu_is_online "$cpu"
+ local cpu_status=$?
+ if [ "$cpu_status" == 0 ]; then
+ continue
+ fi
+ timeout_test_once "test" "$cpu" "$TIMEOUT"
+ printf "%-3s %13s\n" "$src_cpu" "$timeout_diff" >>"$LOG"
+ avg_arr+=("$timeout_diff")
+ done
+ compute_average "${avg_arr[@]}"
+ printf "Expected timeout(ns): %s\n" "${residency_arr["$state"]}" >>"$LOG"
+ printf "Observed Avg timeout diff(ns) - State %s: %s\n" "${state_name_arr["$state"]}" "$avg" | tee -a "$LOG"
+ cpuidle_disable_state "$state"
+ done
+}
+
+# Function to exit the test if not intended
+exit_test() {
+ printf "Exiting the test. Test not intended to run.\n"
+ exit "$ksft_skip"
+}
+
+printf "Running this test enables all CPU idle states by the time it concludes.\n"
+printf "Note: This test does not restore previous idle state.\n"
+
+declare -a residency_arr
+declare -a latency_arr
+declare -a core_arr
+declare -a first_core_arr
+declare -a state_name_arr
+
+parse_arguments "$@"
+
+rm -f "$LOG"
+touch "$LOG"
+
+NUM_CPUS=$(nproc --all)
+NUM_STATES=$(ls -1 /sys/devices/system/cpu/cpu"$IPI_SRC_CPU"/cpuidle/ | wc -l)
+
+extract_core_information
+extract_state_information
+
+ins_mod "$MODULE"
+
+run_ipi_tests
+if [ "$RUN_TIMER_TEST" == "1" ]; then
+ run_timeout_tests
+fi
+
+# Enable all idle states for all CPUs
+op_cpuidle $ENABLE
+printf "Removing %s module\n" "$MODULE"
+printf "Full Output logged at: %s\n" "$LOG"
+
+if [ -f "$MODULE" ]; then
+ rmmod "$MODULE"
+fi
+
+exit "$exit_status"
diff --git a/tools/testing/selftests/powerpc/cpuidle_latency/settings b/tools/testing/selftests/powerpc/cpuidle_latency/settings
new file mode 100644
index 000000000000..e7b9417537fb
--- /dev/null
+++ b/tools/testing/selftests/powerpc/cpuidle_latency/settings
@@ -0,0 +1 @@
+timeout=0
--
2.25.1
More information about the Linuxppc-dev
mailing list