[PATCH 2/2] powerpc/83xx: Split usb.c
Christophe Leroy
christophe.leroy at csgroup.eu
Thu Aug 17 01:22:17 AEST 2023
usb.c contains three independent parts with no common part.
Split it.
Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
---
arch/powerpc/platforms/83xx/Makefile | 3 +
.../platforms/83xx/{usb.c => usb_831x.c} | 118 ------------------
arch/powerpc/platforms/83xx/usb_834x.c | 90 +++++++++++++
arch/powerpc/platforms/83xx/usb_837x.c | 58 +++++++++
4 files changed, 151 insertions(+), 118 deletions(-)
rename arch/powerpc/platforms/83xx/{usb.c => usb_831x.c} (51%)
create mode 100644 arch/powerpc/platforms/83xx/usb_834x.c
create mode 100644 arch/powerpc/platforms/83xx/usb_837x.c
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 6b4013e01b3b..2590ac4dcec4 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -13,3 +13,6 @@ obj-$(CONFIG_MPC836x_RDK) += mpc836x_rdk.o
obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o
obj-$(CONFIG_ASP834x) += asp834x.o
obj-$(CONFIG_KMETER1) += km83xx.o
+obj-$(CONFIG_PPC_MPC831x) += usb_831x.o
+obj-$(CONFIG_PPC_MPC834x) += usb_834x.o
+obj-$(CONFIG_PPC_MPC837x) += usb_837x.o
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb_831x.c
similarity index 51%
rename from arch/powerpc/platforms/83xx/usb.c
rename to arch/powerpc/platforms/83xx/usb_831x.c
index d5ad6cff9bd8..28c24e90f022 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb_831x.c
@@ -17,81 +17,6 @@
#include "mpc83xx.h"
-#ifdef CONFIG_PPC_MPC834x
-int __init mpc834x_usb_cfg(void)
-{
- unsigned long sccr, sicrl, sicrh;
- void __iomem *immap;
- struct device_node *np = NULL;
- int port0_is_dr = 0, port1_is_dr = 0;
- const void *prop, *dr_mode;
-
- immap = ioremap(get_immrbase(), 0x1000);
- if (!immap)
- return -ENOMEM;
-
- /* Read registers */
- /* Note: DR and MPH must use the same clock setting in SCCR */
- sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK;
- sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
- sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
-
- np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
- if (np) {
- sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
-
- prop = of_get_property(np, "phy_type", NULL);
- port1_is_dr = 1;
- if (prop &&
- (!strcmp(prop, "utmi") || !strcmp(prop, "utmi_wide"))) {
- sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
- sicrh |= MPC834X_SICRH_USB_UTMI;
- port0_is_dr = 1;
- } else if (prop && !strcmp(prop, "serial")) {
- dr_mode = of_get_property(np, "dr_mode", NULL);
- if (dr_mode && !strcmp(dr_mode, "otg")) {
- sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
- port0_is_dr = 1;
- } else {
- sicrl |= MPC834X_SICRL_USB1;
- }
- } else if (prop && !strcmp(prop, "ulpi")) {
- sicrl |= MPC834X_SICRL_USB1;
- } else {
- pr_warn("834x USB PHY type not supported\n");
- }
- of_node_put(np);
- }
- np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
- if (np) {
- sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
-
- prop = of_get_property(np, "port0", NULL);
- if (prop) {
- if (port0_is_dr)
- pr_warn("834x USB port0 can't be used by both DR and MPH!\n");
- sicrl &= ~MPC834X_SICRL_USB0;
- }
- prop = of_get_property(np, "port1", NULL);
- if (prop) {
- if (port1_is_dr)
- pr_warn("834x USB port1 can't be used by both DR and MPH!\n");
- sicrl &= ~MPC834X_SICRL_USB1;
- }
- of_node_put(np);
- }
-
- /* Write back */
- out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
- out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
- out_be32(immap + MPC83XX_SICRH_OFFS, sicrh);
-
- iounmap(immap);
- return 0;
-}
-#endif /* CONFIG_PPC_MPC834x */
-
-#ifdef CONFIG_PPC_MPC831x
int __init mpc831x_usb_cfg(void)
{
u32 temp;
@@ -201,46 +126,3 @@ int __init mpc831x_usb_cfg(void)
of_node_put(np);
return ret;
}
-#endif /* CONFIG_PPC_MPC831x */
-
-#ifdef CONFIG_PPC_MPC837x
-int __init mpc837x_usb_cfg(void)
-{
- void __iomem *immap;
- struct device_node *np = NULL;
- const void *prop;
- int ret = 0;
-
- np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
- if (!np || !of_device_is_available(np)) {
- of_node_put(np);
- return -ENODEV;
- }
- prop = of_get_property(np, "phy_type", NULL);
-
- if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
- pr_warn("837x USB PHY type not supported\n");
- of_node_put(np);
- return -EINVAL;
- }
-
- /* Map IMMR space for pin and clock settings */
- immap = ioremap(get_immrbase(), 0x1000);
- if (!immap) {
- of_node_put(np);
- return -ENOMEM;
- }
-
- /* Configure clock */
- clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11,
- MPC837X_SCCR_USB_DRCM_11);
-
- /* Configure pin mux for ULPI/serial */
- clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK,
- MPC837X_SICRL_USB_ULPI);
-
- iounmap(immap);
- of_node_put(np);
- return ret;
-}
-#endif /* CONFIG_PPC_MPC837x */
diff --git a/arch/powerpc/platforms/83xx/usb_834x.c b/arch/powerpc/platforms/83xx/usb_834x.c
new file mode 100644
index 000000000000..3a8d6c662d06
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/usb_834x.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Freescale 83xx USB SOC setup code
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Author: Li Yang
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+int __init mpc834x_usb_cfg(void)
+{
+ unsigned long sccr, sicrl, sicrh;
+ void __iomem *immap;
+ struct device_node *np = NULL;
+ int port0_is_dr = 0, port1_is_dr = 0;
+ const void *prop, *dr_mode;
+
+ immap = ioremap(get_immrbase(), 0x1000);
+ if (!immap)
+ return -ENOMEM;
+
+ /* Read registers */
+ /* Note: DR and MPH must use the same clock setting in SCCR */
+ sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK;
+ sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
+ sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+ if (np) {
+ sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
+
+ prop = of_get_property(np, "phy_type", NULL);
+ port1_is_dr = 1;
+ if (prop &&
+ (!strcmp(prop, "utmi") || !strcmp(prop, "utmi_wide"))) {
+ sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
+ sicrh |= MPC834X_SICRH_USB_UTMI;
+ port0_is_dr = 1;
+ } else if (prop && !strcmp(prop, "serial")) {
+ dr_mode = of_get_property(np, "dr_mode", NULL);
+ if (dr_mode && !strcmp(dr_mode, "otg")) {
+ sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
+ port0_is_dr = 1;
+ } else {
+ sicrl |= MPC834X_SICRL_USB1;
+ }
+ } else if (prop && !strcmp(prop, "ulpi")) {
+ sicrl |= MPC834X_SICRL_USB1;
+ } else {
+ pr_warn("834x USB PHY type not supported\n");
+ }
+ of_node_put(np);
+ }
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
+ if (np) {
+ sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
+
+ prop = of_get_property(np, "port0", NULL);
+ if (prop) {
+ if (port0_is_dr)
+ pr_warn("834x USB port0 can't be used by both DR and MPH!\n");
+ sicrl &= ~MPC834X_SICRL_USB0;
+ }
+ prop = of_get_property(np, "port1", NULL);
+ if (prop) {
+ if (port1_is_dr)
+ pr_warn("834x USB port1 can't be used by both DR and MPH!\n");
+ sicrl &= ~MPC834X_SICRL_USB1;
+ }
+ of_node_put(np);
+ }
+
+ /* Write back */
+ out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
+ out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
+ out_be32(immap + MPC83XX_SICRH_OFFS, sicrh);
+
+ iounmap(immap);
+ return 0;
+}
diff --git a/arch/powerpc/platforms/83xx/usb_837x.c b/arch/powerpc/platforms/83xx/usb_837x.c
new file mode 100644
index 000000000000..726935bb6e2d
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/usb_837x.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Freescale 83xx USB SOC setup code
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Author: Li Yang
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+int __init mpc837x_usb_cfg(void)
+{
+ void __iomem *immap;
+ struct device_node *np = NULL;
+ const void *prop;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+ if (!np || !of_device_is_available(np)) {
+ of_node_put(np);
+ return -ENODEV;
+ }
+ prop = of_get_property(np, "phy_type", NULL);
+
+ if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
+ pr_warn("837x USB PHY type not supported\n");
+ of_node_put(np);
+ return -EINVAL;
+ }
+
+ /* Map IMMR space for pin and clock settings */
+ immap = ioremap(get_immrbase(), 0x1000);
+ if (!immap) {
+ of_node_put(np);
+ return -ENOMEM;
+ }
+
+ /* Configure clock */
+ clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11,
+ MPC837X_SCCR_USB_DRCM_11);
+
+ /* Configure pin mux for ULPI/serial */
+ clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK,
+ MPC837X_SICRL_USB_ULPI);
+
+ iounmap(immap);
+ of_node_put(np);
+ return ret;
+}
--
2.41.0
More information about the Linuxppc-dev
mailing list