[PATCH v2 14/28] soc: fsl: cpm1: qmc: Split Tx and Rx TSA entries setup
Christophe Leroy
christophe.leroy at csgroup.eu
Tue Aug 8 18:08:37 AEST 2023
Le 26/07/2023 à 17:02, Herve Codina a écrit :
> The Tx and Rx entries for a given channel are set in one function.
>
> In order to modify Rx entries and Tx entries independently of one other,
> split this function in one for the Rx part and one for the Tx part.
>
> Signed-off-by: Herve Codina <herve.codina at bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy at csgroup.eu>
> ---
> drivers/soc/fsl/qe/qmc.c | 49 ++++++++++++++++++++++++++++------------
> 1 file changed, 35 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c
> index 146eebc12737..c8ddd2a54bee 100644
> --- a/drivers/soc/fsl/qe/qmc.c
> +++ b/drivers/soc/fsl/qe/qmc.c
> @@ -610,14 +610,14 @@ static int qmc_chan_setup_tsa_64rxtx(struct qmc_chan *chan, const struct tsa_ser
> return 0;
> }
>
> -static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_serial_info *info,
> - bool enable)
> +static int qmc_chan_setup_tsa_32rx(struct qmc_chan *chan, const struct tsa_serial_info *info,
> + bool enable)
> {
> unsigned int i;
> u16 curr;
> u16 val;
>
> - /* Use a Tx 32 entries table and a Rx 32 entries table */
> + /* Use a Rx 32 entries table */
>
> val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);
>
> @@ -633,6 +633,30 @@ static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_
> return -EBUSY;
> }
> }
> +
> + /* Set entries based on Rx stuff */
> + for (i = 0; i < info->nb_rx_ts; i++) {
> + if (!(chan->rx_ts_mask & (((u64)1) << i)))
> + continue;
> +
> + qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2),
> + ~QMC_TSA_WRAP, enable ? val : 0x0000);
> + }
> +
> + return 0;
> +}
> +
> +static int qmc_chan_setup_tsa_32tx(struct qmc_chan *chan, const struct tsa_serial_info *info,
> + bool enable)
> +{
> + unsigned int i;
> + u16 curr;
> + u16 val;
> +
> + /* Use a Tx 32 entries table */
> +
> + val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);
> +
> /* Check entries based on Tx stuff */
> for (i = 0; i < info->nb_tx_ts; i++) {
> if (!(chan->tx_ts_mask & (((u64)1) << i)))
> @@ -646,14 +670,6 @@ static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_
> }
> }
>
> - /* Set entries based on Rx stuff */
> - for (i = 0; i < info->nb_rx_ts; i++) {
> - if (!(chan->rx_ts_mask & (((u64)1) << i)))
> - continue;
> -
> - qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2),
> - ~QMC_TSA_WRAP, enable ? val : 0x0000);
> - }
> /* Set entries based on Tx stuff */
> for (i = 0; i < info->nb_tx_ts; i++) {
> if (!(chan->tx_ts_mask & (((u64)1) << i)))
> @@ -680,9 +696,14 @@ static int qmc_chan_setup_tsa(struct qmc_chan *chan, bool enable)
> * Setup one common 64 entries table or two 32 entries (one for Tx
> * and one for Tx) according to assigned TS numbers.
> */
> - return ((info.nb_tx_ts > 32) || (info.nb_rx_ts > 32)) ?
> - qmc_chan_setup_tsa_64rxtx(chan, &info, enable) :
> - qmc_chan_setup_tsa_32rx_32tx(chan, &info, enable);
> + if (info.nb_tx_ts > 32 || info.nb_rx_ts > 32)
> + return qmc_chan_setup_tsa_64rxtx(chan, &info, enable);
> +
> + ret = qmc_chan_setup_tsa_32rx(chan, &info, enable);
> + if (ret)
> + return ret;
> +
> + return qmc_chan_setup_tsa_32tx(chan, &info, enable);
> }
>
> static int qmc_chan_command(struct qmc_chan *chan, u8 qmc_opcode)
More information about the Linuxppc-dev
mailing list