[PATCH v2 10/28] soc: fsl: cpm1: qmc: Introduce qmc_chan_setup_tsa*
Christophe Leroy
christophe.leroy at csgroup.eu
Tue Aug 8 18:05:12 AEST 2023
Le 26/07/2023 à 17:02, Herve Codina a écrit :
> Introduce the qmc_chan_setup_tsa* functions to setup entries related
> to the given channel.
> Use them during QMC channels setup.
>
> Signed-off-by: Herve Codina <herve.codina at bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy at csgroup.eu>
> ---
> drivers/soc/fsl/qe/qmc.c | 161 ++++++++++++++++++++++++++++++---------
> 1 file changed, 125 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c
> index 64a11f5c6f85..c5552a0b5b19 100644
> --- a/drivers/soc/fsl/qe/qmc.c
> +++ b/drivers/soc/fsl/qe/qmc.c
> @@ -240,6 +240,11 @@ static inline void qmc_clrbits16(void __iomem *addr, u16 clr)
> qmc_write16(addr, qmc_read16(addr) & ~clr);
> }
>
> +static inline void qmc_clrsetbits16(void __iomem *addr, u16 clr, u16 set)
> +{
> + qmc_write16(addr, (qmc_read16(addr) & ~clr) | set);
> +}
> +
> static inline void qmc_write32(void __iomem *addr, u32 val)
> {
> iowrite32be(val, addr);
> @@ -562,6 +567,122 @@ static void qmc_chan_read_done(struct qmc_chan *chan)
> spin_unlock_irqrestore(&chan->rx_lock, flags);
> }
>
> +static int qmc_chan_setup_tsa_64rxtx(struct qmc_chan *chan, const struct tsa_serial_info *info)
> +{
> + unsigned int i;
> + u16 curr;
> + u16 val;
> +
> + /*
> + * Use a common Tx/Rx 64 entries table.
> + * Tx and Rx related stuffs must be identical
> + */
> + if (chan->tx_ts_mask != chan->rx_ts_mask) {
> + dev_err(chan->qmc->dev, "chan %u uses different Rx and Tx TS\n", chan->id);
> + return -EINVAL;
> + }
> +
> + val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);
> +
> + /* Check entries based on Rx stuff*/
> + for (i = 0; i < info->nb_rx_ts; i++) {
> + if (!(chan->rx_ts_mask & (((u64)1) << i)))
> + continue;
> +
> + curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2));
> + if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) {
> + dev_err(chan->qmc->dev, "chan %u TxRx entry %d already used\n",
> + chan->id, i);
> + return -EBUSY;
> + }
> + }
> +
> + /* Set entries based on Rx stuff*/
> + for (i = 0; i < info->nb_rx_ts; i++) {
> + if (!(chan->rx_ts_mask & (((u64)1) << i)))
> + continue;
> +
> + qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2),
> + ~QMC_TSA_WRAP, val);
> + }
> +
> + return 0;
> +}
> +
> +static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_serial_info *info)
> +{
> + unsigned int i;
> + u16 curr;
> + u16 val;
> +
> + /* Use a Tx 32 entries table and a Rx 32 entries table */
> +
> + val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);
> +
> + /* Check entries based on Rx stuff */
> + for (i = 0; i < info->nb_rx_ts; i++) {
> + if (!(chan->rx_ts_mask & (((u64)1) << i)))
> + continue;
> +
> + curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2));
> + if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) {
> + dev_err(chan->qmc->dev, "chan %u Rx entry %d already used\n",
> + chan->id, i);
> + return -EBUSY;
> + }
> + }
> + /* Check entries based on Tx stuff */
> + for (i = 0; i < info->nb_tx_ts; i++) {
> + if (!(chan->tx_ts_mask & (((u64)1) << i)))
> + continue;
> +
> + curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATTX + (i * 2));
> + if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) {
> + dev_err(chan->qmc->dev, "chan %u Tx entry %d already used\n",
> + chan->id, i);
> + return -EBUSY;
> + }
> + }
> +
> + /* Set entries based on Rx stuff */
> + for (i = 0; i < info->nb_rx_ts; i++) {
> + if (!(chan->rx_ts_mask & (((u64)1) << i)))
> + continue;
> +
> + qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2),
> + ~QMC_TSA_WRAP, val);
> + }
> + /* Set entries based on Tx stuff */
> + for (i = 0; i < info->nb_tx_ts; i++) {
> + if (!(chan->tx_ts_mask & (((u64)1) << i)))
> + continue;
> +
> + qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATTX + (i * 2),
> + ~QMC_TSA_WRAP, val);
> + }
> +
> + return 0;
> +}
> +
> +static int qmc_chan_setup_tsa(struct qmc_chan *chan)
> +{
> + struct tsa_serial_info info;
> + int ret;
> +
> + /* Retrieve info from the TSA related serial */
> + ret = tsa_serial_get_info(chan->qmc->tsa_serial, &info);
> + if (ret)
> + return ret;
> +
> + /*
> + * Setup one common 64 entries table or two 32 entries (one for Tx
> + * and one for Tx) according to assigned TS numbers.
> + */
> + return ((info.nb_tx_ts > 32) || (info.nb_rx_ts > 32)) ?
> + qmc_chan_setup_tsa_64rxtx(chan, &info) :
> + qmc_chan_setup_tsa_32rx_32tx(chan, &info);
> +}
> +
> static int qmc_chan_command(struct qmc_chan *chan, u8 qmc_opcode)
> {
> return cpm_command(chan->id << 2, (qmc_opcode << 4) | 0x0E);
> @@ -921,7 +1042,6 @@ static int qmc_of_parse_chans(struct qmc *qmc, struct device_node *np)
>
> static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *info)
> {
> - struct qmc_chan *chan;
> unsigned int i;
> u16 val;
>
> @@ -935,18 +1055,6 @@ static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *in
> for (i = 0; i < 64; i++)
> qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), 0x0000);
>
> - /* Set entries based on Rx stuff*/
> - list_for_each_entry(chan, &qmc->chan_head, list) {
> - for (i = 0; i < info->nb_rx_ts; i++) {
> - if (!(chan->rx_ts_mask & (((u64)1) << i)))
> - continue;
> -
> - val = QMC_TSA_VALID | QMC_TSA_MASK |
> - QMC_TSA_CHANNEL(chan->id);
> - qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), val);
> - }
> - }
> -
> /* Set Wrap bit on last entry */
> qmc_setbits16(qmc->scc_pram + QMC_GBL_TSATRX + ((info->nb_rx_ts - 1) * 2),
> QMC_TSA_WRAP);
> @@ -963,7 +1071,6 @@ static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *in
>
> static int qmc_init_tsa_32rx_32tx(struct qmc *qmc, const struct tsa_serial_info *info)
> {
> - struct qmc_chan *chan;
> unsigned int i;
> u16 val;
>
> @@ -978,28 +1085,6 @@ static int qmc_init_tsa_32rx_32tx(struct qmc *qmc, const struct tsa_serial_info
> qmc_write16(qmc->scc_pram + QMC_GBL_TSATTX + (i * 2), 0x0000);
> }
>
> - /* Set entries based on Rx and Tx stuff*/
> - list_for_each_entry(chan, &qmc->chan_head, list) {
> - /* Rx part */
> - for (i = 0; i < info->nb_rx_ts; i++) {
> - if (!(chan->rx_ts_mask & (((u64)1) << i)))
> - continue;
> -
> - val = QMC_TSA_VALID | QMC_TSA_MASK |
> - QMC_TSA_CHANNEL(chan->id);
> - qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), val);
> - }
> - /* Tx part */
> - for (i = 0; i < info->nb_tx_ts; i++) {
> - if (!(chan->tx_ts_mask & (((u64)1) << i)))
> - continue;
> -
> - val = QMC_TSA_VALID | QMC_TSA_MASK |
> - QMC_TSA_CHANNEL(chan->id);
> - qmc_write16(qmc->scc_pram + QMC_GBL_TSATTX + (i * 2), val);
> - }
> - }
> -
> /* Set Wrap bit on last entries */
> qmc_setbits16(qmc->scc_pram + QMC_GBL_TSATRX + ((info->nb_rx_ts - 1) * 2),
> QMC_TSA_WRAP);
> @@ -1081,6 +1166,10 @@ static int qmc_setup_chan(struct qmc *qmc, struct qmc_chan *chan)
>
> chan->qmc = qmc;
>
> + ret = qmc_chan_setup_tsa(chan);
> + if (ret)
> + return ret;
> +
> /* Set channel specific parameter base address */
> chan->s_param = qmc->dpram + (chan->id * 64);
> /* 16 bd per channel (8 rx and 8 tx) */
More information about the Linuxppc-dev
mailing list