[PATCHv2 pci-next 2/2] PCI/AER: Rate limit the reporting of the correctable errors
Grant Grundler
grundler at chromium.org
Sat Apr 8 04:53:27 AEST 2023
On Thu, Apr 6, 2023 at 12:50 PM Bjorn Helgaas <helgaas at kernel.org> wrote:
>
> On Fri, Mar 17, 2023 at 10:51:09AM -0700, Grant Grundler wrote:
> > From: Rajat Khandelwal <rajat.khandelwal at linux.intel.com>
> >
> > There are many instances where correctable errors tend to inundate
> > the message buffer. We observe such instances during thunderbolt PCIe
> > tunneling.
> >
> > It's true that they are mitigated by the hardware and are non-fatal
> > but we shouldn't be spamming the logs with such correctable errors as it
> > confuses other kernel developers less familiar with PCI errors, support
> > staff, and users who happen to look at the logs, hence rate limit them.
> >
> > A typical example log inside an HP TBT4 dock:
> > [54912.661142] pcieport 0000:00:07.0: AER: Multiple Corrected error received: 0000:2b:00.0
> > [54912.661194] igc 0000:2b:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> > [54912.661203] igc 0000:2b:00.0: device [8086:5502] error status/mask=00001100/00002000
> > [54912.661211] igc 0000:2b:00.0: [ 8] Rollover
> > [54912.661219] igc 0000:2b:00.0: [12] Timeout
> > [54982.838760] pcieport 0000:00:07.0: AER: Corrected error received: 0000:2b:00.0
> > [54982.838798] igc 0000:2b:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> > [54982.838808] igc 0000:2b:00.0: device [8086:5502] error status/mask=00001000/00002000
> > [54982.838817] igc 0000:2b:00.0: [12] Timeout
>
> The timestamps don't contribute to understanding the problem, so we
> can omit them.
Ok.
> > This gets repeated continuously, thus inundating the buffer.
> >
> > Signed-off-by: Rajat Khandelwal <rajat.khandelwal at linux.intel.com>
> > Signed-off-by: Grant Grundler <grundler at chromium.org>
> > ---
> > drivers/pci/pcie/aer.c | 42 ++++++++++++++++++++++++++++--------------
> > 1 file changed, 28 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> > index cb6b96233967..b592cea8bffe 100644
> > --- a/drivers/pci/pcie/aer.c
> > +++ b/drivers/pci/pcie/aer.c
> > @@ -706,8 +706,8 @@ static void __aer_print_error(struct pci_dev *dev,
> > errmsg = "Unknown Error Bit";
> >
> > if (info->severity == AER_CORRECTABLE)
> > - pci_info(dev, " [%2d] %-22s%s\n", i, errmsg,
> > - info->first_error == i ? " (First)" : "");
> > + pci_info_ratelimited(dev, " [%2d] %-22s%s\n", i, errmsg,
> > + info->first_error == i ? " (First)" : "");
>
> I don't think this is going to reliably work the way we want. We have
> a bunch of pci_info_ratelimited() calls, and each caller has its own
> ratelimit_state data. Unless we call pci_info_ratelimited() exactly
> the same number of times for each error, the ratelimit counters will
> get out of sync and we'll end up printing fragments from error A mixed
> with fragments from error B.
Ok - what I'm reading between the lines here is the output should be
emitted in one step, not multiple pci_info_ratelimited() calls. if the
code built an output string (using sprintnf()), and then called
pci_info_ratelimited() exactly once at the bottom, would that be
sufficient?
> I think we need to explicitly manage the ratelimiting ourselves,
> similar to print_hmi_event_info() or print_extlog_rcd(). Then we can
> have a *single* ratelimit_state, and we can check it once to determine
> whether to log this correctable error.
Is the rate limiting per call location or per device? From above, I
understood rate limiting is "per call location".
If the code only has one call location, it should achieve the same goal, right?
cheers,
grant
>
> > else
> > pci_err(dev, " [%2d] %-22s%s\n", i, errmsg,
> > info->first_error == i ? " (First)" : "");
> > @@ -719,7 +719,6 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
> > {
> > int layer, agent;
> > int id = ((dev->bus->number << 8) | dev->devfn);
> > - const char *level;
> >
> > if (!info->status) {
> > pci_err(dev, "PCIe Bus Error: severity=%s, type=Inaccessible, (Unregistered Agent ID)\n",
> > @@ -730,14 +729,21 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
> > layer = AER_GET_LAYER_ERROR(info->severity, info->status);
> > agent = AER_GET_AGENT(info->severity, info->status);
> >
> > - level = (info->severity == AER_CORRECTABLE) ? KERN_INFO : KERN_ERR;
> > + if (info->severity == AER_CORRECTABLE) {
> > + pci_info_ratelimited(dev, "PCIe Bus Error: severity=%s, type=%s, (%s)\n",
> > + aer_error_severity_string[info->severity],
> > + aer_error_layer[layer], aer_agent_string[agent]);
> >
> > - pci_printk(level, dev, "PCIe Bus Error: severity=%s, type=%s, (%s)\n",
> > - aer_error_severity_string[info->severity],
> > - aer_error_layer[layer], aer_agent_string[agent]);
> > + pci_info_ratelimited(dev, " device [%04x:%04x] error status/mask=%08x/%08x\n",
> > + dev->vendor, dev->device, info->status, info->mask);
> > + } else {
> > + pci_err(dev, "PCIe Bus Error: severity=%s, type=%s, (%s)\n",
> > + aer_error_severity_string[info->severity],
> > + aer_error_layer[layer], aer_agent_string[agent]);
> >
> > - pci_printk(level, dev, " device [%04x:%04x] error status/mask=%08x/%08x\n",
> > - dev->vendor, dev->device, info->status, info->mask);
> > + pci_err(dev, " device [%04x:%04x] error status/mask=%08x/%08x\n",
> > + dev->vendor, dev->device, info->status, info->mask);
> > + }
> >
> > __aer_print_error(dev, info);
> >
> > @@ -757,11 +763,19 @@ static void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info)
> > u8 bus = info->id >> 8;
> > u8 devfn = info->id & 0xff;
> >
> > - pci_info(dev, "%s%s error received: %04x:%02x:%02x.%d\n",
> > - info->multi_error_valid ? "Multiple " : "",
> > - aer_error_severity_string[info->severity],
> > - pci_domain_nr(dev->bus), bus, PCI_SLOT(devfn),
> > - PCI_FUNC(devfn));
> > + if (info->severity == AER_CORRECTABLE)
> > + pci_info_ratelimited(dev, "%s%s error received: %04x:%02x:%02x.%d\n",
> > + info->multi_error_valid ? "Multiple " : "",
> > + aer_error_severity_string[info->severity],
> > + pci_domain_nr(dev->bus), bus, PCI_SLOT(devfn),
> > + PCI_FUNC(devfn));
> > + else
> > + pci_info(dev, "%s%s error received: %04x:%02x:%02x.%d\n",
> > + info->multi_error_valid ? "Multiple " : "",
> > + aer_error_severity_string[info->severity],
> > + pci_domain_nr(dev->bus), bus, PCI_SLOT(devfn),
> > + PCI_FUNC(devfn));
> > +
> > }
> >
> > #ifdef CONFIG_ACPI_APEI_PCIEAER
> > --
> > 2.40.0.rc1.284.g88254d51c5-goog
> >
More information about the Linuxppc-dev
mailing list