[PATCH v4 14/20] powerpc/64s: Clear/restore caller gprs in syscall interrupt/return

[Nicholas Piggin]

On Wed Aug 24, 2022 at 12:05 PM AEST, Rohan McLure wrote:
> Clear user state in gprs (assign to zero) to reduce the influence of user
> registers on speculation within kernel syscall handlers. Clears occur
> at the very beginning of the sc and scv 0 interrupt handlers, with
> restores occurring following the execution of the syscall handler.
>
> Signed-off-by: Rohan McLure <rmclure at linux.ibm.com>
> ---
> V1 -> V2: Update summary
> V2 -> V3: Remove erroneous summary paragraph on syscall_exit_prepare
> V3 -> V4: Use ZEROIZE instead of NULLIFY
> ---
>  arch/powerpc/kernel/interrupt_64.S | 22 ++++++++++++++++++----
>  1 file changed, 18 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/kernel/interrupt_64.S b/arch/powerpc/kernel/interrupt_64.S
> index 0178aeba3820..a8065209dd8c 100644
> --- a/arch/powerpc/kernel/interrupt_64.S
> +++ b/arch/powerpc/kernel/interrupt_64.S
> @@ -70,7 +70,7 @@ _ASM_NOKPROBE_SYMBOL(system_call_vectored_\name)
>  	ld	r2,PACATOC(r13)
>  	mfcr	r12
>  	li	r11,0
> -	/* Can we avoid saving r3-r8 in common case? */
> +	/* Save syscall parameters in r3-r8 */
>  	std	r3,GPR3(r1)
>  	std	r4,GPR4(r1)
>  	std	r5,GPR5(r1)
> @@ -109,6 +109,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
>  	 * but this is the best we can do.
>  	 */
>  
> +	/*
> +	 * Zero user registers to prevent influencing speculative execution
> +	 * state of kernel code.
> +	 */
> +	ZEROIZE_GPRS(5, 12)
> +	ZEROIZE_NVGPRS()
> +
>  	/* Calling convention has r3 = orig r0, r4 = regs */
>  	mr	r3,r0

Ther's not much reason for this to go right against
system_call_exception. You could set it up above where you set r4,
and zero r0 as well with the rest of the volatiles? I guess it'll
be overwritten by mflr r0 right away... although that could be an
implementation detail not everything requires it and mcount call
gets noped out. So probably doesn't hurt to zero it, while we're
being paranoid.

Thanks,
Nick

>  	bl	system_call_exception
> @@ -139,6 +146,7 @@ BEGIN_FTR_SECTION
>  	HMT_MEDIUM_LOW
>  END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
>  
> +	REST_NVGPRS(r1)
>  	cmpdi	r3,0
>  	bne	.Lsyscall_vectored_\name\()_restore_regs
>  
> @@ -181,7 +189,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
>  	ld	r4,_LINK(r1)
>  	ld	r5,_XER(r1)
>  
> -	REST_NVGPRS(r1)
>  	ld	r0,GPR0(r1)
>  	mtcr	r2
>  	mtctr	r3
> @@ -249,7 +256,7 @@ END_BTB_FLUSH_SECTION
>  	ld	r2,PACATOC(r13)
>  	mfcr	r12
>  	li	r11,0
> -	/* Can we avoid saving r3-r8 in common case? */
> +	/* Save syscall parameters in r3-r8 */
>  	std	r3,GPR3(r1)
>  	std	r4,GPR4(r1)
>  	std	r5,GPR5(r1)
> @@ -300,6 +307,13 @@ END_BTB_FLUSH_SECTION
>  	wrteei	1
>  #endif
>  
> +	/*
> +	 * Zero user registers to prevent influencing speculative execution
> +	 * state of kernel code.
> +	 */
> +	ZEROIZE_GPRS(5, 12)
> +	ZEROIZE_NVGPRS()
> +
>  	/* Calling convention has r3 = orig r0, r4 = regs */
>  	mr	r3,r0
>  	bl	system_call_exception
> @@ -342,6 +356,7 @@ BEGIN_FTR_SECTION
>  	stdcx.	r0,0,r1			/* to clear the reservation */
>  END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
>  
> +	REST_NVGPRS(r1)
>  	cmpdi	r3,0
>  	bne	.Lsyscall_restore_regs
>  	/* Zero volatile regs that may contain sensitive kernel data */
> @@ -377,7 +392,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
>  .Lsyscall_restore_regs:
>  	ld	r3,_CTR(r1)
>  	ld	r4,_XER(r1)
> -	REST_NVGPRS(r1)
>  	mtctr	r3
>  	mtspr	SPRN_XER,r4
>  	ld	r0,GPR0(r1)
> -- 
> 2.34.1