[PATCH v3 06/16] powerpc: Fix objtool unannotated intra-function call warnings on PPC32
Sathvika Vasireddy
sv at linux.ibm.com
Mon Sep 12 18:20:10 AEST 2022
From: Christophe Leroy <christophe.leroy at csgroup.eu>
Fix several annotations in assembly files on PPC32.
Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
[Sathvika Vasireddy: Changed subject line from "objtool/powerpc: Activate
objtool on PPC32" to "powerpc: Fix objtool unannotated intra-function call
warnings on PPC32", and removed Kconfig change to enable objtool, as it
is a part of "objtool/powerpc: Enable objtool to be built on ppc" patch in
this series.]
Signed-off-by: Sathvika Vasireddy <sv at linux.ibm.com>
---
arch/powerpc/kernel/cpu_setup_6xx.S | 26 ++++++++++++------
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 8 ++++--
arch/powerpc/kernel/entry_32.S | 9 ++++--
arch/powerpc/kernel/head_40x.S | 5 +++-
arch/powerpc/kernel/head_8xx.S | 5 +++-
arch/powerpc/kernel/head_book3s_32.S | 29 ++++++++++++++------
arch/powerpc/kernel/head_fsl_booke.S | 5 +++-
arch/powerpc/kernel/swsusp_32.S | 5 +++-
arch/powerpc/kvm/fpu.S | 17 ++++++++----
arch/powerpc/platforms/52xx/lite5200_sleep.S | 15 +++++++---
10 files changed, 89 insertions(+), 35 deletions(-)
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index f8b5ff64b604..f29ce3dd6140 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -4,6 +4,8 @@
* Copyright (C) 2003 Benjamin Herrenschmidt (benh at kernel.crashing.org)
*/
+#include <linux/linkage.h>
+
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
@@ -81,7 +83,7 @@ _GLOBAL(__setup_cpu_745x)
blr
/* Enable caches for 603's, 604, 750 & 7400 */
-setup_common_caches:
+SYM_FUNC_START_LOCAL(setup_common_caches)
mfspr r11,SPRN_HID0
andi. r0,r11,HID0_DCE
ori r11,r11,HID0_ICE|HID0_DCE
@@ -95,11 +97,12 @@ setup_common_caches:
sync
isync
blr
+SYM_FUNC_END(setup_common_caches)
/* 604, 604e, 604ev, ...
* Enable superscalar execution & branch history table
*/
-setup_604_hid0:
+SYM_FUNC_START_LOCAL(setup_604_hid0)
mfspr r11,SPRN_HID0
ori r11,r11,HID0_SIED|HID0_BHTE
ori r8,r11,HID0_BTCD
@@ -110,6 +113,7 @@ setup_604_hid0:
sync
isync
blr
+SYM_FUNC_END(setup_604_hid0)
/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
* erratas we work around here.
@@ -125,13 +129,14 @@ setup_604_hid0:
* needed once we have applied workaround #5 (though it's
* not set by Apple's firmware at least).
*/
-setup_7400_workarounds:
+SYM_FUNC_START_LOCAL(setup_7400_workarounds)
mfpvr r3
rlwinm r3,r3,0,20,31
cmpwi 0,r3,0x0207
ble 1f
blr
-setup_7410_workarounds:
+SYM_FUNC_END(setup_7400_workarounds)
+SYM_FUNC_START_LOCAL(setup_7410_workarounds)
mfpvr r3
rlwinm r3,r3,0,20,31
cmpwi 0,r3,0x0100
@@ -151,6 +156,7 @@ setup_7410_workarounds:
sync
isync
blr
+SYM_FUNC_END(setup_7410_workarounds)
/* 740/750/7400/7410
* Enable Store Gathering (SGE), Address Broadcast (ABE),
@@ -158,7 +164,7 @@ setup_7410_workarounds:
* Dynamic Power Management (DPM), Speculative (SPD)
* Clear Instruction cache throttling (ICTC)
*/
-setup_750_7400_hid0:
+SYM_FUNC_START_LOCAL(setup_750_7400_hid0)
mfspr r11,SPRN_HID0
ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
oris r11,r11,HID0_DPM at h
@@ -177,12 +183,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
sync
isync
blr
+SYM_FUNC_END(setup_750_7400_hid0)
/* 750cx specific
* Looks like we have to disable NAP feature for some PLL settings...
* (waiting for confirmation)
*/
-setup_750cx:
+SYM_FUNC_START_LOCAL(setup_750cx)
mfspr r10, SPRN_HID1
rlwinm r10,r10,4,28,31
cmpwi cr0,r10,7
@@ -196,11 +203,13 @@ setup_750cx:
andc r6,r6,r7
stw r6,CPU_SPEC_FEATURES(r4)
blr
+SYM_FUNC_END(setup_750cx)
/* 750fx specific
*/
-setup_750fx:
+SYM_FUNC_START_LOCAL(setup_750fx)
blr
+SYM_FUNC_END(setup_750fx)
/* MPC 745x
* Enable Store Gathering (SGE), Branch Folding (FOLD)
@@ -212,7 +221,7 @@ setup_750fx:
* Clear Instruction cache throttling (ICTC)
* Enable L2 HW prefetch
*/
-setup_745x_specifics:
+SYM_FUNC_START_LOCAL(setup_745x_specifics)
/* We check for the presence of an L3 cache setup by
* the firmware. If any, we disable NAP capability as
* it's known to be bogus on rev 2.1 and earlier
@@ -270,6 +279,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
sync
isync
blr
+SYM_FUNC_END(setup_745x_specifics)
/*
* Initialize the FPU registers. This is needed to work around an errata
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 4bf33f1b4193..f573a4f3bbe6 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -8,6 +8,8 @@
* Benjamin Herrenschmidt <benh at kernel.crashing.org>
*/
+#include <linux/linkage.h>
+
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/cputable.h>
@@ -274,7 +276,7 @@ _GLOBAL(flush_dcache_L1)
blr
-has_L2_cache:
+SYM_FUNC_START_LOCAL(has_L2_cache)
/* skip L2 cache on P2040/P2040E as they have no L2 cache */
mfspr r3, SPRN_SVR
/* shift right by 8 bits and clear E bit of SVR */
@@ -290,9 +292,10 @@ has_L2_cache:
1:
li r3, 0
blr
+SYM_FUNC_END(has_L2_cache)
/* flush backside L2 cache */
-flush_backside_L2_cache:
+SYM_FUNC_START_LOCAL(flush_backside_L2_cache)
mflr r10
bl has_L2_cache
mtlr r10
@@ -313,6 +316,7 @@ flush_backside_L2_cache:
bne 1b
2:
blr
+SYM_FUNC_END(flush_backside_L2_cache)
_GLOBAL(cpu_down_flush_e500v2)
mflr r0
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 1d599df6f169..f8480d88509f 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -18,6 +18,8 @@
#include <linux/err.h>
#include <linux/sys.h>
#include <linux/threads.h>
+#include <linux/linkage.h>
+
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -74,17 +76,18 @@ _ASM_NOKPROBE_SYMBOL(prepare_transfer_to_handler)
#endif /* CONFIG_PPC_BOOK3S_32 || CONFIG_E500 */
#if defined(CONFIG_PPC_KUEP) && defined(CONFIG_PPC_BOOK3S_32)
- .globl __kuep_lock
-__kuep_lock:
+SYM_FUNC_START(__kuep_lock)
lwz r9, THREAD+THSR0(r2)
update_user_segments_by_4 r9, r10, r11, r12
blr
+SYM_FUNC_END(__kuep_lock)
-__kuep_unlock:
+SYM_FUNC_START_LOCAL(__kuep_unlock)
lwz r9, THREAD+THSR0(r2)
rlwinm r9,r9,0,~SR_NX
update_user_segments_by_4 r9, r10, r11, r12
blr
+SYM_FUNC_END(__kuep_unlock)
.macro kuep_lock
bl __kuep_lock
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 088f500896c7..9110fe9d6747 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -28,6 +28,8 @@
#include <linux/init.h>
#include <linux/pgtable.h>
#include <linux/sizes.h>
+#include <linux/linkage.h>
+
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -662,7 +664,7 @@ start_here:
* kernel initialization. This maps the first 32 MBytes of memory 1:1
* virtual to physical and more importantly sets the cache mode.
*/
-initial_mmu:
+SYM_FUNC_START_LOCAL(initial_mmu)
tlbia /* Invalidate all TLB entries */
isync
@@ -711,6 +713,7 @@ initial_mmu:
mtspr SPRN_EVPR,r0
blr
+SYM_FUNC_END(initial_mmu)
_GLOBAL(abort)
mfspr r13,SPRN_DBCR0
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 0b05f2be66b9..c94ed5a08c93 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -18,6 +18,8 @@
#include <linux/magic.h>
#include <linux/pgtable.h>
#include <linux/sizes.h>
+#include <linux/linkage.h>
+
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -625,7 +627,7 @@ start_here:
* 24 Mbytes of data, and the 512k IMMR space. Anything not covered by
* these mappings is mapped by page tables.
*/
-initial_mmu:
+SYM_FUNC_START_LOCAL(initial_mmu)
li r8, 0
mtspr SPRN_MI_CTR, r8 /* remove PINNED ITLB entries */
lis r10, MD_TWAM at h
@@ -686,6 +688,7 @@ initial_mmu:
#endif
mtspr SPRN_DER, r8
blr
+SYM_FUNC_END(initial_mmu)
_GLOBAL(mmu_pin_tlb)
lis r9, (1f - PAGE_OFFSET)@h
diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
index 519b60695167..4af12447dc0b 100644
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -18,6 +18,8 @@
#include <linux/init.h>
#include <linux/pgtable.h>
+#include <linux/linkage.h>
+
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -877,7 +879,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_HPTE_TABLE)
* Load stuff into the MMU. Intended to be called with
* IR=0 and DR=0.
*/
-early_hash_table:
+SYM_FUNC_START_LOCAL(early_hash_table)
sync /* Force all PTE updates to finish */
isync
tlbia /* Clear all TLB entries */
@@ -888,8 +890,9 @@ early_hash_table:
ori r6, r6, 3 /* 256kB table */
mtspr SPRN_SDR1, r6
blr
+SYM_FUNC_END(early_hash_table)
-load_up_mmu:
+SYM_FUNC_START_LOCAL(load_up_mmu)
sync /* Force all PTE updates to finish */
isync
tlbia /* Clear all TLB entries */
@@ -918,6 +921,7 @@ BEGIN_MMU_FTR_SECTION
LOAD_BAT(7,r3,r4,r5)
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
+SYM_FUNC_END(load_up_mmu)
_GLOBAL(load_segment_registers)
li r0, NUM_USER_SEGMENTS /* load up user segment register values */
@@ -1028,7 +1032,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_HPTE_TABLE)
* this makes sure it's done.
* -- Cort
*/
-clear_bats:
+SYM_FUNC_START_LOCAL(clear_bats)
li r10,0
mtspr SPRN_DBAT0U,r10
@@ -1072,6 +1076,7 @@ BEGIN_MMU_FTR_SECTION
mtspr SPRN_IBAT7L,r10
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
+SYM_FUNC_END(clear_bats)
_GLOBAL(update_bats)
lis r4, 1f at h
@@ -1108,15 +1113,16 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
mtspr SPRN_SRR1, r6
rfi
-flush_tlbs:
+SYM_FUNC_START_LOCAL(flush_tlbs)
lis r10, 0x40
1: addic. r10, r10, -0x1000
tlbie r10
bgt 1b
sync
blr
+SYM_FUNC_END(flush_tlbs)
-mmu_off:
+SYM_FUNC_START_LOCAL(mmu_off)
addi r4, r3, __after_mmu_off - _start
mfmsr r3
andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */
@@ -1128,9 +1134,10 @@ mmu_off:
mtspr SPRN_SRR1,r3
sync
rfi
+SYM_FUNC_END(mmu_off)
/* We use one BAT to map up to 256M of RAM at _PAGE_OFFSET */
-initial_bats:
+SYM_FUNC_START_LOCAL(initial_bats)
lis r11,PAGE_OFFSET at h
tophys(r8,r11)
#ifdef CONFIG_SMP
@@ -1146,9 +1153,10 @@ initial_bats:
mtspr SPRN_IBAT0U,r11
isync
blr
+SYM_FUNC_END(initial_bats)
#ifdef CONFIG_BOOTX_TEXT
-setup_disp_bat:
+SYM_FUNC_START_LOCAL(setup_disp_bat)
/*
* setup the display bat prepared for us in prom.c
*/
@@ -1164,10 +1172,11 @@ setup_disp_bat:
mtspr SPRN_DBAT3L,r8
mtspr SPRN_DBAT3U,r11
blr
+SYM_FUNC_END(setup_disp_bat)
#endif /* CONFIG_BOOTX_TEXT */
#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
-setup_cpm_bat:
+SYM_FUNC_START_LOCAL(setup_cpm_bat)
lis r8, 0xf000
ori r8, r8, 0x002a
mtspr SPRN_DBAT1L, r8
@@ -1177,10 +1186,11 @@ setup_cpm_bat:
mtspr SPRN_DBAT1U, r11
blr
+SYM_FUNC_END(setup_cpm_bat)
#endif
#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
-setup_usbgecko_bat:
+SYM_FUNC_START_LOCAL(setup_usbgecko_bat)
/* prepare a BAT for early io */
#if defined(CONFIG_GAMECUBE)
lis r8, 0x0c00
@@ -1199,6 +1209,7 @@ setup_usbgecko_bat:
mtspr SPRN_DBAT1L, r8
mtspr SPRN_DBAT1U, r11
blr
+SYM_FUNC_END(setup_usbgecko_bat)
#endif
.data
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index f0db4f52bc00..744b096857a1 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -29,6 +29,8 @@
#include <linux/init.h>
#include <linux/threads.h>
#include <linux/pgtable.h>
+#include <linux/linkage.h>
+
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -885,7 +887,7 @@ KernelSPE:
* Translate the effec addr in r3 to phys addr. The phys addr will be put
* into r3(higher 32bit) and r4(lower 32bit)
*/
-get_phys_addr:
+SYM_FUNC_START_LOCAL(get_phys_addr)
mfmsr r8
mfspr r9,SPRN_PID
rlwinm r9,r9,16,0x3fff0000 /* turn PID into MAS6[SPID] */
@@ -907,6 +909,7 @@ get_phys_addr:
mfspr r3,SPRN_MAS7
#endif
blr
+SYM_FUNC_END(get_phys_addr)
/*
* Global functions
diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S
index e0cbd63007f2..ffb79326483c 100644
--- a/arch/powerpc/kernel/swsusp_32.S
+++ b/arch/powerpc/kernel/swsusp_32.S
@@ -1,5 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/threads.h>
+#include <linux/linkage.h>
+
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
@@ -400,7 +402,7 @@ _ASM_NOKPROBE_SYMBOL(swsusp_arch_resume)
/* FIXME:This construct is actually not useful since we don't shut
* down the instruction MMU, we could just flip back MSR-DR on.
*/
-turn_on_mmu:
+SYM_FUNC_START_LOCAL(turn_on_mmu)
mflr r4
mtsrr0 r4
mtsrr1 r3
@@ -408,4 +410,5 @@ turn_on_mmu:
isync
rfi
_ASM_NOKPROBE_SYMBOL(turn_on_mmu)
+SYM_FUNC_END(turn_on_mmu)
diff --git a/arch/powerpc/kvm/fpu.S b/arch/powerpc/kvm/fpu.S
index 315c94946bad..b68e7f26a81f 100644
--- a/arch/powerpc/kvm/fpu.S
+++ b/arch/powerpc/kvm/fpu.S
@@ -6,6 +6,8 @@
*/
#include <linux/pgtable.h>
+#include <linux/linkage.h>
+
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -110,18 +112,22 @@ FPS_THREE_IN(fsel)
* R8 = (double*)¶m3 [load_three]
* LR = instruction call function
*/
-fpd_load_three:
+SYM_FUNC_START_LOCAL(fpd_load_three)
lfd 2,0(r8) /* load param3 */
-fpd_load_two:
+SYM_FUNC_START_LOCAL(fpd_load_two)
lfd 1,0(r7) /* load param2 */
-fpd_load_one:
+SYM_FUNC_START_LOCAL(fpd_load_one)
lfd 0,0(r6) /* load param1 */
-fpd_load_none:
+SYM_FUNC_START_LOCAL(fpd_load_none)
lfd 3,0(r3) /* load up fpscr value */
MTFSF_L(3)
lwz r6, 0(r4) /* load cr */
mtcr r6
blr
+SYM_FUNC_END(fpd_load_none)
+SYM_FUNC_END(fpd_load_one)
+SYM_FUNC_END(fpd_load_two)
+SYM_FUNC_END(fpd_load_three)
/*
* End of double instruction processing
@@ -131,13 +137,14 @@ fpd_load_none:
* R5 = (double*)&result
* LR = caller of instruction call function
*/
-fpd_return:
+SYM_FUNC_START_LOCAL(fpd_return)
mfcr r6
stfd 0,0(r5) /* save result */
mffs 0
stfd 0,0(r3) /* save new fpscr value */
stw r6,0(r4) /* save new cr value */
blr
+SYM_FUNC_END(fpd_return)
/*
* Double operation with no input operand
diff --git a/arch/powerpc/platforms/52xx/lite5200_sleep.S b/arch/powerpc/platforms/52xx/lite5200_sleep.S
index afee8b1515a8..0b12647e7b42 100644
--- a/arch/powerpc/platforms/52xx/lite5200_sleep.S
+++ b/arch/powerpc/platforms/52xx/lite5200_sleep.S
@@ -1,4 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
#include <asm/reg.h>
#include <asm/ppc_asm.h>
#include <asm/processor.h>
@@ -178,7 +180,8 @@ sram_code:
/* local udelay in sram is needed */
- udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
+SYM_FUNC_START_LOCAL(udelay)
+ /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
mullw r12, r12, r11
mftb r13 /* start */
add r12, r13, r12 /* end */
@@ -187,6 +190,7 @@ sram_code:
cmp cr0, r13, r12
blt 1b
blr
+SYM_FUNC_END(udelay)
sram_code_end:
@@ -271,7 +275,7 @@ _ASM_NOKPROBE_SYMBOL(lite5200_wakeup)
SAVE_SR(n+2, addr+2); \
SAVE_SR(n+3, addr+3);
-save_regs:
+SYM_FUNC_START_LOCAL(save_regs)
stw r0, 0(r4)
stw r1, 0x4(r4)
stw r2, 0x8(r4)
@@ -317,6 +321,7 @@ save_regs:
SAVE_SPRN(TBRU, 0x5b)
blr
+SYM_FUNC_END(save_regs)
/* restore registers */
@@ -336,7 +341,7 @@ save_regs:
LOAD_SR(n+2, addr+2); \
LOAD_SR(n+3, addr+3);
-restore_regs:
+SYM_FUNC_START_LOCAL(restore_regs)
lis r4, registers at h
ori r4, r4, registers at l
@@ -393,6 +398,7 @@ restore_regs:
blr
_ASM_NOKPROBE_SYMBOL(restore_regs)
+SYM_FUNC_END(restore_regs)
@@ -403,7 +409,7 @@ _ASM_NOKPROBE_SYMBOL(restore_regs)
* Flush data cache
* Do this by just reading lots of stuff into the cache.
*/
-flush_data_cache:
+SYM_FUNC_START_LOCAL(flush_data_cache)
lis r3,CONFIG_KERNEL_START at h
ori r3,r3,CONFIG_KERNEL_START at l
li r4,NUM_CACHE_LINES
@@ -413,3 +419,4 @@ flush_data_cache:
addi r3,r3,L1_CACHE_BYTES /* Next line, please */
bdnz 1b
blr
+SYM_FUNC_END(flush_data_cache)
--
2.31.1
More information about the Linuxppc-dev
mailing list