[PATCH v3] ASoC: fsl_asrc: Add initialization finishing check in runtime resume

[Shengjiu Wang]

If the initialization is not finished, then filling input data to
the FIFO may fail. So it is better to add initialization finishing
check in the runtime resume for suspend & resume case.

And consider the case of three instances working in parallel,
increase the retry times to 50 for more initialization time.

Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
Reviewed-by: Nicolin Chen <nicolinc at gmail.com>
---
changes in v3:
- update warning message.

changes in v2:
- update comments.

 sound/soc/fsl/fsl_asrc.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index aa5edf32d988..936aef5d2767 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -20,6 +20,7 @@
 
 #define IDEAL_RATIO_DECIMAL_DEPTH 26
 #define DIVIDER_NUM  64
+#define INIT_RETRY_NUM 50
 
 #define pair_err(fmt, ...) \
 	dev_err(&asrc->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
@@ -27,6 +28,9 @@
 #define pair_dbg(fmt, ...) \
 	dev_dbg(&asrc->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
 
+#define pair_warn(fmt, ...) \
+	dev_warn(&asrc->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
+
 /* Corresponding to process_option */
 static unsigned int supported_asrc_rate[] = {
 	5512, 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000,
@@ -579,7 +583,7 @@ static void fsl_asrc_start_pair(struct fsl_asrc_pair *pair)
 {
 	struct fsl_asrc *asrc = pair->asrc;
 	enum asrc_pair_index index = pair->index;
-	int reg, retry = 10, i;
+	int reg, retry = INIT_RETRY_NUM, i;
 
 	/* Enable the current pair */
 	regmap_update_bits(asrc->regmap, REG_ASRCTR,
@@ -592,6 +596,10 @@ static void fsl_asrc_start_pair(struct fsl_asrc_pair *pair)
 		reg &= ASRCFG_INIRQi_MASK(index);
 	} while (!reg && --retry);
 
+	/* NOTE: Doesn't treat initialization timeout as an error */
+	if (!retry)
+		pair_warn("initialization isn't finished\n");
+
 	/* Make the input fifo to ASRC STALL level */
 	regmap_read(asrc->regmap, REG_ASRCNCR, &reg);
 	for (i = 0; i < pair->channels * 4; i++)
@@ -1257,6 +1265,7 @@ static int fsl_asrc_runtime_resume(struct device *dev)
 {
 	struct fsl_asrc *asrc = dev_get_drvdata(dev);
 	struct fsl_asrc_priv *asrc_priv = asrc->private;
+	int reg, retry = INIT_RETRY_NUM;
 	int i, ret;
 	u32 asrctr;
 
@@ -1295,6 +1304,24 @@ static int fsl_asrc_runtime_resume(struct device *dev)
 	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ASRCEi_ALL_MASK, asrctr);
 
+	/* Wait for status of initialization for all enabled pairs */
+	do {
+		udelay(5);
+		regmap_read(asrc->regmap, REG_ASRCFG, &reg);
+		reg = (reg >> ASRCFG_INIRQi_SHIFT(0)) & 0x7;
+	} while ((reg != ((asrctr >> ASRCTR_ASRCEi_SHIFT(0)) & 0x7)) && --retry);
+
+	/*
+	 * NOTE: Doesn't treat initialization timeout as an error
+	 * Some of the pairs may success, then still can continue.
+	 */
+	if (!retry) {
+		for (i = ASRC_PAIR_A; i < ASRC_PAIR_MAX_NUM; i++) {
+			if ((asrctr & ASRCTR_ASRCEi_MASK(i)) && !(reg & (1 << i)))
+				dev_warn(dev, "Pair %c initialization isn't finished\n", 'A' + i);
+		}
+	}
+
 	return 0;
 
 disable_asrck_clk:
-- 
2.34.1