[PATCH net-next v7 08/10] powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G
Sean Anderson
sean.anderson at seco.com
Sat Oct 29 03:54:59 AEDT 2022
On 10/28/22 12:30, Camelia Alexandra Groza wrote:
>> -----Original Message-----
>> From: Sean Anderson <sean.anderson at seco.com>
>> Sent: Monday, October 17, 2022 23:23
>> To: David S . Miller <davem at davemloft.net>; Jakub Kicinski
>> <kuba at kernel.org>; Madalin Bucur <madalin.bucur at nxp.com>; Camelia
>> Alexandra Groza <camelia.groza at nxp.com>; netdev at vger.kernel.org
>> Cc: Eric Dumazet <edumazet at google.com>; linuxppc-dev @ lists . ozlabs .
>> org <linuxppc-dev at lists.ozlabs.org>; linux-arm-kernel at lists.infradead.org;
>> linux-kernel at vger.kernel.org; Russell King <linux at armlinux.org.uk>; Paolo
>> Abeni <pabeni at redhat.com>; Sean Anderson <sean.anderson at seco.com>;
>> Benjamin Herrenschmidt <benh at kernel.crashing.org>; Krzysztof Kozlowski
>> <krzysztof.kozlowski+dt at linaro.org>; Leo Li <leoyang.li at nxp.com>; Michael
>> Ellerman <mpe at ellerman.id.au>; Paul Mackerras <paulus at samba.org>; Rob
>> Herring <robh+dt at kernel.org>; devicetree at vger.kernel.org
>> Subject: [PATCH net-next v7 08/10] powerpc: dts: t208x: Mark MAC1 and
>> MAC2 as 10G
>>
>> On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC
>> dtsi
>> fragments, and mark the QMAN ports as 10G.
>>
>> Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan
>> support to the SoC device tree(s)")
>> Signed-off-by: Sean Anderson <sean.anderson at seco.com>
>> ---
>>
>> (no changes since v4)
>>
>> Changes in v4:
>> - New
>
> Hi Sean,
>
> These changes prevent MAC2 from probing on T2080RDB due to insufficient FMan hardware resources.
>
> fsl-fman ffe400000.fman: set_num_of_tasks: Requested num_of_tasks and extra tasks pool for fm0 exceed total num_of_tasks.
> fsl_dpa: dpaa_eth_init_tx_port: fm_port_init failed
> fsl_dpa: probe of dpaa-ethernet.5 failed with error -11
>
> The distribution of resources depends on the port type, and different FMan hardware revisions have different amounts of resources.
>
> The current distribution of resources can be reconsidered, but this change should be reverted for now.
OK, so this patch does two things:
@@ -37,12 +11,14 @@
cell-index = <0x8>;
compatible = "fsl,fman-v3-port-rx";
reg = <0x88000 0x1000>;
+ fsl,fman-10g-port;
};
fman0_tx_0x28: port at a8000 {
cell-index = <0x28>;
compatible = "fsl,fman-v3-port-tx";
reg = <0xa8000 0x1000>;
+ fsl,fman-10g-port;
};
ethernet at e0000 {
@@ -52,7 +28,7 @@
fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
ptp-timer = <&ptp_timer0>;
pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
- pcs-handle-names = "sgmii", "qsgmii";
+ pcs-handle-names = "sgmii", "xfi";
};
mdio at e1000 {
First, it marks the ports as 10g. I believe this is what's causing the
resource problems above. Second, it removes support for QSGMII and adds
support for XFI. This is a matter of correctness; these MACs really
don't support QSGMII, and do support XFI. As I understand it, you can
run a 10g port at 1g speeds, it just won't perform as well. So I think a
more minimal revert would be to delete the fsl,fman-10g-port properties
in t2081si-post.dtsi.
That said, is 10g even being used on these ports? I included this patch
in order to avoid breaking any existing users.
--Sean
> Regards,
> Camelia
>
>
>> .../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi | 44 +++++++++++++++++++
>> .../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi | 44 +++++++++++++++++++
>> arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 4 +-
>> 3 files changed, 90 insertions(+), 2 deletions(-)
>> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>>
>> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>> b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>> new file mode 100644
>> index 000000000000..437dab3fc017
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>> @@ -0,0 +1,44 @@
>> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
>> +/*
>> + * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset
>> 0x400000 ]
>> + *
>> + * Copyright 2022 Sean Anderson <sean.anderson at seco.com>
>> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
>> + */
>> +
>> +fman at 400000 {
>> + fman0_rx_0x08: port at 88000 {
>> + cell-index = <0x8>;
>> + compatible = "fsl,fman-v3-port-rx";
>> + reg = <0x88000 0x1000>;
>> + fsl,fman-10g-port;
>> + };
>> +
>> + fman0_tx_0x28: port at a8000 {
>> + cell-index = <0x28>;
>> + compatible = "fsl,fman-v3-port-tx";
>> + reg = <0xa8000 0x1000>;
>> + fsl,fman-10g-port;
>> + };
>> +
>> + ethernet at e0000 {
>> + cell-index = <0>;
>> + compatible = "fsl,fman-memac";
>> + reg = <0xe0000 0x1000>;
>> + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
>> + ptp-timer = <&ptp_timer0>;
>> + pcsphy-handle = <&pcsphy0>;
>> + };
>> +
>> + mdio at e1000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
>> + reg = <0xe1000 0x1000>;
>> + fsl,erratum-a011043; /* must ignore read errors */
>> +
>> + pcsphy0: ethernet-phy at 0 {
>> + reg = <0x0>;
>> + };
>> + };
>> +};
>> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>> b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>> new file mode 100644
>> index 000000000000..ad116b17850a
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>> @@ -0,0 +1,44 @@
>> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
>> +/*
>> + * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset
>> 0x400000 ]
>> + *
>> + * Copyright 2022 Sean Anderson <sean.anderson at seco.com>
>> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
>> + */
>> +
>> +fman at 400000 {
>> + fman0_rx_0x09: port at 89000 {
>> + cell-index = <0x9>;
>> + compatible = "fsl,fman-v3-port-rx";
>> + reg = <0x89000 0x1000>;
>> + fsl,fman-10g-port;
>> + };
>> +
>> + fman0_tx_0x29: port at a9000 {
>> + cell-index = <0x29>;
>> + compatible = "fsl,fman-v3-port-tx";
>> + reg = <0xa9000 0x1000>;
>> + fsl,fman-10g-port;
>> + };
>> +
>> + ethernet at e2000 {
>> + cell-index = <1>;
>> + compatible = "fsl,fman-memac";
>> + reg = <0xe2000 0x1000>;
>> + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
>> + ptp-timer = <&ptp_timer0>;
>> + pcsphy-handle = <&pcsphy1>;
>> + };
>> +
>> + mdio at e3000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
>> + reg = <0xe3000 0x1000>;
>> + fsl,erratum-a011043; /* must ignore read errors */
>> +
>> + pcsphy1: ethernet-phy at 0 {
>> + reg = <0x0>;
>> + };
>> + };
>> +};
>> diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> index ecbb447920bc..74e17e134387 100644
>> --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> @@ -609,8 +609,8 @@ usb1: usb at 211000 {
>> /include/ "qoriq-bman1.dtsi"
>>
>> /include/ "qoriq-fman3-0.dtsi"
>> -/include/ "qoriq-fman3-0-1g-0.dtsi"
>> -/include/ "qoriq-fman3-0-1g-1.dtsi"
>> +/include/ "qoriq-fman3-0-10g-2.dtsi"
>> +/include/ "qoriq-fman3-0-10g-3.dtsi"
>> /include/ "qoriq-fman3-0-1g-2.dtsi"
>> /include/ "qoriq-fman3-0-1g-3.dtsi"
>> /include/ "qoriq-fman3-0-1g-4.dtsi"
>> --
>> 2.35.1.1320.gc452695387.dirty
>
More information about the Linuxppc-dev
mailing list