[PATCH v2] powerpc/hv-gpci: Fix hv_gpci event list

[Kajol Jain]

Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpci events got deprecated for platforms firmware that
supports counter_info_version 0x8 or above.

Patch fixes the hv_gpci event list by adding a new attribute
group called "hv_gpci_event_attrs_v6" and a "EVENT_ENABLE"
macro to enable these events for platform firmware
that supports counter_info_version 0x6 or below. And assigning
the hv_gpci event list based on output counter info version
of underlying plaform.

Fixes: 97bf2640184f ("powerpc/perf/hv-gpci: add the remaining gpci requests")
Signed-off-by: Kajol Jain <kjain at linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy at linux.ibm.com>
---
Changelog:

v1 -> v2
- As suggested by Michael Ellerman, using counter_info_version value
  rather then cpu_has_feature() to assign hv-gpci event list.

 arch/powerpc/perf/hv-gpci-requests.h |  4 ++++
 arch/powerpc/perf/hv-gpci.c          | 35 ++++++++++++++++++++++++++--
 arch/powerpc/perf/hv-gpci.h          |  1 +
 arch/powerpc/perf/req-gen/perf.h     | 17 ++++++++++++++
 4 files changed, 55 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/perf/hv-gpci-requests.h b/arch/powerpc/perf/hv-gpci-requests.h
index 8965b4463d43..baef3d082de9 100644
--- a/arch/powerpc/perf/hv-gpci-requests.h
+++ b/arch/powerpc/perf/hv-gpci-requests.h
@@ -79,6 +79,7 @@ REQUEST(__field(0,	8,	partition_id)
 )
 #include I(REQUEST_END)
 
+#ifdef EVENT_ENABLE
 /*
  * Not available for counter_info_version >= 0x8, use
  * run_instruction_cycles_by_partition(0x100) instead.
@@ -92,6 +93,7 @@ REQUEST(__field(0,	8,	partition_id)
 	__count(0x10,	8,	cycles)
 )
 #include I(REQUEST_END)
+#endif
 
 #define REQUEST_NAME system_performance_capabilities
 #define REQUEST_NUM 0x40
@@ -103,6 +105,7 @@ REQUEST(__field(0,	1,	perf_collect_privileged)
 )
 #include I(REQUEST_END)
 
+#ifdef EVENT_ENABLE
 #define REQUEST_NAME processor_bus_utilization_abc_links
 #define REQUEST_NUM 0x50
 #define REQUEST_IDX_KIND "hw_chip_id=?"
@@ -194,6 +197,7 @@ REQUEST(__field(0,	4,	phys_processor_idx)
 	__count(0x28,	8,	instructions_completed)
 )
 #include I(REQUEST_END)
+#endif
 
 /* Processor_core_power_mode (0x95) skipped, no counters */
 /* Affinity_domain_information_by_virtual_processor (0xA0) skipped,
diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c
index 5eb60ed5b5e8..6eeabf3975e5 100644
--- a/arch/powerpc/perf/hv-gpci.c
+++ b/arch/powerpc/perf/hv-gpci.c
@@ -70,9 +70,9 @@ static const struct attribute_group format_group = {
 	.attrs = format_attrs,
 };
 
-static const struct attribute_group event_group = {
+static struct attribute_group event_group = {
 	.name  = "events",
-	.attrs = hv_gpci_event_attrs,
+	/* .attrs is set in init */
 };
 
 #define HV_CAPS_ATTR(_name, _format)				\
@@ -330,6 +330,7 @@ static int hv_gpci_init(void)
 	int r;
 	unsigned long hret;
 	struct hv_perf_caps caps;
+	struct hv_gpci_request_buffer *arg;
 
 	hv_gpci_assert_offsets_correct();
 
@@ -353,6 +354,36 @@ static int hv_gpci_init(void)
 	/* sampling not supported */
 	h_gpci_pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
 
+	arg = (void *)get_cpu_var(hv_gpci_reqb);
+	memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
+
+	/*
+	 * hcall H_GET_PERF_COUNTER_INFO populates the output
+	 * counter_info_version value based on the system hypervisor.
+	 * Pass the counter request 0x10 corresponds to request type
+	 * 'Dispatch_timebase_by_processor', to get the supported
+	 * counter_info_version.
+	 */
+	arg->params.counter_request = cpu_to_be32(0x10);
+
+	r = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
+			virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
+	if (r) {
+		pr_devel("hcall failed, can't get supported counter_info_version: 0x%x\n", r);
+		arg->params.counter_info_version_out = 0x8;
+	}
+
+	/*
+	 * Use counter_info_version_out value to assign
+	 * required hv-gpci event list.
+	 */
+	if (arg->params.counter_info_version_out >= 0x8)
+		event_group.attrs = hv_gpci_event_attrs;
+	else
+		event_group.attrs = hv_gpci_event_attrs_v6;
+
+	put_cpu_var(hv_gpci_reqb);
+
 	r = perf_pmu_register(&h_gpci_pmu, h_gpci_pmu.name, -1);
 	if (r)
 		return r;
diff --git a/arch/powerpc/perf/hv-gpci.h b/arch/powerpc/perf/hv-gpci.h
index 4d108262bed7..10aba0ccb434 100644
--- a/arch/powerpc/perf/hv-gpci.h
+++ b/arch/powerpc/perf/hv-gpci.h
@@ -26,6 +26,7 @@ enum {
 #define REQUEST_FILE "../hv-gpci-requests.h"
 #define NAME_LOWER hv_gpci
 #define NAME_UPPER HV_GPCI
+#define EVENT_ENABLE
 #include "req-gen/perf.h"
 #undef REQUEST_FILE
 #undef NAME_LOWER
diff --git a/arch/powerpc/perf/req-gen/perf.h b/arch/powerpc/perf/req-gen/perf.h
index fa9bc804e67a..e0b355931271 100644
--- a/arch/powerpc/perf/req-gen/perf.h
+++ b/arch/powerpc/perf/req-gen/perf.h
@@ -139,6 +139,23 @@ PMU_EVENT_ATTR_STRING(							\
 #define REQUEST_(r_name, r_value, r_idx_1, r_fields)			\
 	r_fields
 
+/* Generate event list for platforms with counter_info_version 0x6 or below */
+static __maybe_unused struct attribute *hv_gpci_event_attrs_v6[] = {
+#include REQUEST_FILE
+	NULL
+};
+
+/*
+ * Based on getPerfCountInfo v1.018 documentation, some of the hv-gpci
+ * events got deprecated for platforms firmware that supports
+ * counter_info_version 0x8 or above.
+ * Undefining macro EVENT_ENABLE, to disable the addition of deprecated
+ * events in "hv_gpci_event_attrs" attribute group, for platforms that
+ * supports counter_info_version 0x8 or above.
+ */
+#undef EVENT_ENABLE
+
+/* Generate event list for platforms with counter_info_version 0x8 or above*/
 static __maybe_unused struct attribute *hv_gpci_event_attrs[] = {
 #include REQUEST_FILE
 	NULL
-- 
2.31.1