[PATCH v7 1/8] dt-bindings: phy: Add 2500BASE-X and 10GBASE-R

[Sean Anderson]

This adds some modes necessary for Lynx 10G support. 2500BASE-X, also
known as 2.5G SGMII, is 1000BASE-X/SGMII overclocked to 3.125 GHz, with
autonegotiation disabled. 10GBASE-R, also known as XFI, is the protocol
spoken between the PMA and PMD ethernet layers for 10GBASE-T and
10GBASE-S/L/E. It is typically used to communicate directly with SFP+
modules, or with 10GBASE-T phys.

Signed-off-by: Sean Anderson <sean.anderson at seco.com>
Acked-by: Rob Herring <robh at kernel.org>
---
PR increasing phy-type maximum [1].

If this commit could be applied sooner rather than later, I'd appreciate
it. This should help avoid another respin if someone else adds another
phy type.

[1] https://github.com/devicetree-org/dt-schema/pull/85

(no changes since v6)

Changes in v6:
- Bump PHY_TYPE_2500BASEX to 13, since PHY_TYPE_USXGMII was added in the
  meantime

Changes in v4:
- New

 include/dt-bindings/phy/phy.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h
index 6b901b342348..5b2b674d8d25 100644
--- a/include/dt-bindings/phy/phy.h
+++ b/include/dt-bindings/phy/phy.h
@@ -23,5 +23,7 @@
 #define PHY_TYPE_DPHY		10
 #define PHY_TYPE_CPHY		11
 #define PHY_TYPE_USXGMII	12
+#define PHY_TYPE_2500BASEX	13
+#define PHY_TYPE_10GBASER	14
 
 #endif /* _DT_BINDINGS_PHY */
-- 
2.35.1.1320.gc452695387.dirty