[PATCH 000/606] i2c: Complete conversion to i2c_probe_new

Jonathan Cameron jic23 at kernel.org
Wed Nov 23 05:58:18 AEDT 2022


Queued all of the below:
with one tweaked as per your suggestion and the highlighted one dropped on basis
I was already carrying the equivalent - as you pointed out.

I was already carrying the required dependency.

Includes the IIO ones in staging.

Thanks,

Jonathan

p.s. I perhaps foolishly did this in a highly manual way so as to
also pick up Andy's RB.  So might have dropped one...

Definitely would have been better as one patch per subsystem with
a cover letter suitable for replies like Andy's to be picked up
by b4.


>   iio: accel: adxl372_i2c: Convert to i2c's .probe_new()
>   iio: accel: bma180: Convert to i2c's .probe_new()
>   iio: accel: bma400: Convert to i2c's .probe_new()
>   iio: accel: bmc150: Convert to i2c's .probe_new()
>   iio: accel: da280: Convert to i2c's .probe_new()
>   iio: accel: kxcjk-1013: Convert to i2c's .probe_new()
>   iio: accel: mma7455_i2c: Convert to i2c's .probe_new()
>   iio: accel: mma8452: Convert to i2c's .probe_new()
>   iio: accel: mma9551: Convert to i2c's .probe_new()
>   iio: accel: mma9553: Convert to i2c's .probe_new()
>   iio: adc: ad7091r5: Convert to i2c's .probe_new()
>   iio: adc: ad7291: Convert to i2c's .probe_new()
>   iio: adc: ad799x: Convert to i2c's .probe_new()
>   iio: adc: ina2xx-adc: Convert to i2c's .probe_new()
>   iio: adc: ltc2471: Convert to i2c's .probe_new()
>   iio: adc: ltc2485: Convert to i2c's .probe_new()
>   iio: adc: ltc2497: Convert to i2c's .probe_new()
>   iio: adc: max1363: Convert to i2c's .probe_new()
>   iio: adc: max9611: Convert to i2c's .probe_new()
>   iio: adc: mcp3422: Convert to i2c's .probe_new()
>   iio: adc: ti-adc081c: Convert to i2c's .probe_new()
>   iio: adc: ti-ads1015: Convert to i2c's .probe_new()
>   iio: cdc: ad7150: Convert to i2c's .probe_new()
>   iio: cdc: ad7746: Convert to i2c's .probe_new()
>   iio: chemical: ams-iaq-core: Convert to i2c's .probe_new()
>   iio: chemical: atlas-ezo-sensor: Convert to i2c's .probe_new()
>   iio: chemical: atlas-sensor: Convert to i2c's .probe_new()
>   iio: chemical: bme680_i2c: Convert to i2c's .probe_new()
>   iio: chemical: ccs811: Convert to i2c's .probe_new()
>   iio: chemical: scd4x: Convert to i2c's .probe_new()
>   iio: chemical: sgp30: Convert to i2c's .probe_new()
>   iio: chemical: sgp40: Convert to i2c's .probe_new()
>   iio: chemical: vz89x: Convert to i2c's .probe_new()
>   iio: dac: ad5064: Convert to i2c's .probe_new()
>   iio: dac: ad5380: Convert to i2c's .probe_new()
>   iio: dac: ad5446: Convert to i2c's .probe_new()
>   iio: dac: ad5593r: Convert to i2c's .probe_new()
>   iio: dac: ad5696-i2c: Convert to i2c's .probe_new()
>   iio: dac: ds4424: Convert to i2c's .probe_new()
>   iio: dac: m62332: Convert to i2c's .probe_new()
>   iio: dac: max517: Convert to i2c's .probe_new()
>   iio: dac: max5821: Convert to i2c's .probe_new()
>   iio: dac: mcp4725: Convert to i2c's .probe_new()
>   iio: dac: ti-dac5571: Convert to i2c's .probe_new()
>   iio: gyro: bmg160_i2c: Convert to i2c's .probe_new()
>   iio: gyro: itg3200_core: Convert to i2c's .probe_new()
>   iio: gyro: mpu3050-i2c: Convert to i2c's .probe_new()
>   iio: gyro: st_gyro_i2c: Convert to i2c's .probe_new()
>   iio: health: afe4404: Convert to i2c's .probe_new()
>   iio: health: max30100: Convert to i2c's .probe_new()
>   iio: health: max30102: Convert to i2c's .probe_new()
>   iio: humidity: am2315: Convert to i2c's .probe_new()
>   iio: humidity: hdc100x: Convert to i2c's .probe_new()
>   iio: humidity: hdc2010: Convert to i2c's .probe_new()
>   iio: humidity: hts221_i2c: Convert to i2c's .probe_new()
>   iio: humidity: htu21: Convert to i2c's .probe_new()
>   iio: humidity: si7005: Convert to i2c's .probe_new()
>   iio: humidity: si7020: Convert to i2c's .probe_new()
>   iio: imu: bmi160/bmi160_i2c: Convert to i2c's .probe_new()
>   iio: imu: fxos8700_i2c: Convert to i2c's .probe_new()
>   iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
>   iio: imu: kmx61: Convert to i2c's .probe_new()
>   iio: imu: st_lsm6dsx: Convert to i2c's .probe_new()
>   iio: light: adjd_s311: Convert to i2c's .probe_new()
>   iio: light: adux1020: Convert to i2c's .probe_new()
>   iio: light: al3010: Convert to i2c's .probe_new()
>   iio: light: al3320a: Convert to i2c's .probe_new()
>   iio: light: apds9300: Convert to i2c's .probe_new()
>   iio: light: apds9960: Convert to i2c's .probe_new()
>   iio: light: bh1750: Convert to i2c's .probe_new()
>   iio: light: bh1780: Convert to i2c's .probe_new()
>   iio: light: cm3232: Convert to i2c's .probe_new()
>   iio: light: cm3323: Convert to i2c's .probe_new()
>   iio: light: cm36651: Convert to i2c's .probe_new()
>   iio: light: gp2ap002: Convert to i2c's .probe_new()
>   iio: light: gp2ap020a00f: Convert to i2c's .probe_new()
>   iio: light: isl29018: Convert to i2c's .probe_new()
>   iio: light: isl29028: Convert to i2c's .probe_new()
>   iio: light: isl29125: Convert to i2c's .probe_new()
>   iio: light: jsa1212: Convert to i2c's .probe_new()
>   iio: light: ltr501: Convert to i2c's .probe_new()
>   iio: light: lv0104cs: Convert to i2c's .probe_new()
>   iio: light: max44000: Convert to i2c's .probe_new()
>   iio: light: max44009: Convert to i2c's .probe_new()
>   iio: light: noa1305: Convert to i2c's .probe_new()
>   iio: light: opt3001: Convert to i2c's .probe_new()
>   iio: light: pa12203001: Convert to i2c's .probe_new()
>   iio: light: rpr0521: Convert to i2c's .probe_new()
>   iio: light: si1133: Convert to i2c's .probe_new()
>   iio: light: si1145: Convert to i2c's .probe_new()
>   iio: light: st_uvis25_i2c: Convert to i2c's .probe_new()
>   iio: light: stk3310: Convert to i2c's .probe_new()
>   iio: light: tcs3414: Convert to i2c's .probe_new()
>   iio: light: tcs3472: Convert to i2c's .probe_new()
>   iio: light: tsl2563: Convert to i2c's .probe_new()
>   iio: light: tsl2583: Convert to i2c's .probe_new()
>   iio: light: tsl2772: Convert to i2c's .probe_new()
>   iio: light: tsl4531: Convert to i2c's .probe_new()
>   iio: light: us5182d: Convert to i2c's .probe_new()
>   iio: light: vcnl4000: Convert to i2c's .probe_new()
>   iio: light: vcnl4035: Convert to i2c's .probe_new()
>   iio: light: veml6030: Convert to i2c's .probe_new()
>   iio: light: veml6070: Convert to i2c's .probe_new()
>   iio: light: zopt2201: Convert to i2c's .probe_new()
>   iio: magnetometer: ak8974: Convert to i2c's .probe_new()
>   iio: magnetometer: ak8975: Convert to i2c's .probe_new()
>   iio: magnetometer: bmc150_magn_i2c: Convert to i2c's .probe_new()
>   iio: magnetometer: hmc5843: Convert to i2c's .probe_new()
>   iio: magnetometer: mag3110: Convert to i2c's .probe_new()
>   iio: magnetometer: mmc35240: Convert to i2c's .probe_new()
>   iio: magnetometer: yamaha-yas530: Convert to i2c's .probe_new()
>   iio: potentiometer: ad5272: Convert to i2c's .probe_new()
>   iio: potentiometer: ds1803: Convert to i2c's .probe_new()
>   iio: potentiometer: max5432: Convert to i2c's .probe_new()
>   iio: potentiometer: tpl0102: Convert to i2c's .probe_new()
>   iio: potentiostat: lmp91000: Convert to i2c's .probe_new()
>   iio: pressure: abp060mg: Convert to i2c's .probe_new()
Not this one > iio: pressure: bmp280-i2c: Convert to i2c's .probe_new()
>   iio: pressure: dlhl60d: Convert to i2c's .probe_new()
>   iio: pressure: dps310: Convert to i2c's .probe_new()
>   iio: pressure: hp03: Convert to i2c's .probe_new()
>   iio: pressure: hp206c: Convert to i2c's .probe_new()
>   iio: pressure: icp10100: Convert to i2c's .probe_new()
>   iio: pressure: mpl115_i2c: Convert to i2c's .probe_new()
>   iio: pressure: mpl3115: Convert to i2c's .probe_new()
>   iio: pressure: ms5611_i2c: Convert to i2c's .probe_new()
>   iio: pressure: ms5637: Convert to i2c's .probe_new()
>   iio: pressure: st_pressure_i2c: Convert to i2c's .probe_new()
>   iio: pressure: t5403: Convert to i2c's .probe_new()
>   iio: pressure: zpa2326_i2c: Convert to i2c's .probe_new()
>   iio: proximity: isl29501: Convert to i2c's .probe_new()
>   iio: proximity: mb1232: Convert to i2c's .probe_new()
>   iio: proximity: pulsedlight-lidar-lite-v2: Convert to i2c's
>     .probe_new()
>   iio: proximity: rfd77402: Convert to i2c's .probe_new()
>   iio: proximity: srf08: Convert to i2c's .probe_new()
>   iio: proximity: sx9500: Convert to i2c's .probe_new()
>   iio: temperature: mlx90614: Convert to i2c's .probe_new()
>   iio: temperature: mlx90632: Convert to i2c's .probe_new()
>   iio: temperature: tmp006: Convert to i2c's .probe_new()
>   iio: temperature: tmp007: Convert to i2c's .probe_new()
>   iio: temperature: tsys01: Convert to i2c's .probe_new()
>   iio: temperature: tsys02d: Convert to i2c's .probe_new()
...

>   staging: iio: adt7316: Convert to i2c's .probe_new()
>   staging: iio: ad5933: Convert to i2c's .probe_new()
>   staging: iio: ade7854: Convert to i2c's .probe_new()
 


More information about the Linuxppc-dev mailing list