[PATCH] powerpc/warp: switch to using gpiod API

Christophe Leroy christophe.leroy at csgroup.eu
Mon Nov 14 23:10:37 AEDT 2022



Le 28/10/2022 à 07:05, Dmitry Torokhov a écrit :
> On Mon, Sep 26, 2022 at 11:03:25PM -0700, Dmitry Torokhov wrote:
>> This switches PIKA Warp away from legacy gpio API and to newer gpiod
>> API, so that we can eventually deprecate the former.
>>
>> Because LEDs are normally driven by leds-gpio driver, but the
>> platform code also wants to access the LEDs during thermal shutdown,
>> and gpiod API does not allow locating GPIO without requesting it,
>> the platform code is now responsible for locating GPIOs through device
>> tree and requesting them. It then constructs platform data for
>> leds-gpio platform device and registers it. This allows platform
>> code to retain access to LED GPIO descriptors and use them when needed.
>>
>> Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
> 
> Gentle ping on this... Could I get a feedback if this is acceptable or
> if you want me to rework this somehow?

Not much to say about it. It adds several lines of code, but if that's 
the only way to allow you to switch to gpiod and abandon gpio, then I 
guess it is ok.

Otherwise, as mentionned by Michael during initial discussion, having 
the LED lightning when the machine dies is probably not vital. So if you 
have something simpler, just go for it. Then we can make something more 
eloborated if somebody screams.

Regardless,

Acked-by: Christophe Leroy <christophe.leroy at csgroup.eu>

> 
> Thanks!
> 
>> ---
>>
>> Compiled only, no hardware to test this.
>>
>>   arch/powerpc/boot/dts/warp.dts    |   4 +-
>>   arch/powerpc/platforms/44x/warp.c | 105 ++++++++++++++++++++++++++----
>>   2 files changed, 94 insertions(+), 15 deletions(-)
>>
>> diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
>> index b4f32740870e..aa62d08e97c2 100644
>> --- a/arch/powerpc/boot/dts/warp.dts
>> +++ b/arch/powerpc/boot/dts/warp.dts
>> @@ -258,14 +258,12 @@ GPIO1: gpio at ef600c00 {
>>   			};
>>   
>>   			power-leds {
>> -				compatible = "gpio-leds";
>> +				compatible = "warp-power-leds";
>>   				green {
>>   					gpios = <&GPIO1 0 0>;
>> -					default-state = "keep";
>>   				};
>>   				red {
>>   					gpios = <&GPIO1 1 0>;
>> -					default-state = "keep";
>>   				};
>>   			};
>>   
>> diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
>> index f03432ef010b..cefa313c09f0 100644
>> --- a/arch/powerpc/platforms/44x/warp.c
>> +++ b/arch/powerpc/platforms/44x/warp.c
>> @@ -5,15 +5,17 @@
>>    * Copyright (c) 2008-2009 PIKA Technologies
>>    *   Sean MacLennan <smaclennan at pikatech.com>
>>    */
>> +#include <linux/err.h>
>>   #include <linux/init.h>
>>   #include <linux/of_platform.h>
>>   #include <linux/kthread.h>
>> +#include <linux/leds.h>
>>   #include <linux/i2c.h>
>>   #include <linux/interrupt.h>
>>   #include <linux/delay.h>
>>   #include <linux/of_address.h>
>>   #include <linux/of_irq.h>
>> -#include <linux/of_gpio.h>
>> +#include <linux/gpio/consumer.h>
>>   #include <linux/slab.h>
>>   #include <linux/export.h>
>>   
>> @@ -92,8 +94,6 @@ static int __init warp_post_info(void)
>>   
>>   static LIST_HEAD(dtm_shutdown_list);
>>   static void __iomem *dtm_fpga;
>> -static unsigned green_led, red_led;
>> -
>>   
>>   struct dtm_shutdown {
>>   	struct list_head list;
>> @@ -101,7 +101,6 @@ struct dtm_shutdown {
>>   	void *arg;
>>   };
>>   
>> -
>>   int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
>>   {
>>   	struct dtm_shutdown *shutdown;
>> @@ -132,6 +131,35 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
>>   	return -EINVAL;
>>   }
>>   
>> +#define WARP_GREEN_LED	0
>> +#define WARP_RED_LED	1
>> +
>> +static struct gpio_led warp_gpio_led_pins[] = {
>> +	[WARP_GREEN_LED] = {
>> +		.name		= "green",
>> +		.default_state	= LEDS_DEFSTATE_KEEP,
>> +		.gpiod		= NULL, /* to be filled by pika_setup_leds() */
>> +	},
>> +	[WARP_RED_LED] = {
>> +		.name		= "red",
>> +		.default_state	= LEDS_DEFSTATE_KEEP,
>> +		.gpiod		= NULL, /* to be filled by pika_setup_leds() */
>> +	},
>> +};
>> +
>> +static struct gpio_led_platform_data warp_gpio_led_data = {
>> +	.leds		= warp_gpio_led_pins,
>> +	.num_leds	= ARRAY_SIZE(warp_gpio_led_pins),
>> +};
>> +
>> +static struct platform_device warp_gpio_leds = {
>> +	.name	= "leds-gpio",
>> +	.id	= -1,
>> +	.dev	= {
>> +		.platform_data = &warp_gpio_led_data,
>> +	},
>> +};
>> +
>>   static irqreturn_t temp_isr(int irq, void *context)
>>   {
>>   	struct dtm_shutdown *shutdown;
>> @@ -139,7 +167,7 @@ static irqreturn_t temp_isr(int irq, void *context)
>>   
>>   	local_irq_disable();
>>   
>> -	gpio_set_value(green_led, 0);
>> +	gpiod_set_value(warp_gpio_led_pins[WARP_GREEN_LED].gpiod, 0);
>>   
>>   	/* Run through the shutdown list. */
>>   	list_for_each_entry(shutdown, &dtm_shutdown_list, list)
>> @@ -153,7 +181,7 @@ static irqreturn_t temp_isr(int irq, void *context)
>>   			out_be32(dtm_fpga + 0x14, reset);
>>   		}
>>   
>> -		gpio_set_value(red_led, value);
>> +		gpiod_set_value(warp_gpio_led_pins[WARP_RED_LED].gpiod, value);
>>   		value ^= 1;
>>   		mdelay(500);
>>   	}
>> @@ -162,25 +190,78 @@ static irqreturn_t temp_isr(int irq, void *context)
>>   	return IRQ_HANDLED;
>>   }
>>   
>> +/*
>> + * Because green and red power LEDs are normally driven by leds-gpio driver,
>> + * but in case of critical temperature shutdown we want to drive them
>> + * ourselves, we acquire both and then create leds-gpio platform device
>> + * ourselves, instead of doing it through device tree. This way we can still
>> + * keep access to the gpios and use them when needed.
>> + */
>>   static int pika_setup_leds(void)
>>   {
>>   	struct device_node *np, *child;
>> +	struct gpio_desc *gpio;
>> +	struct gpio_led *led;
>> +	int led_count = 0;
>> +	int error;
>> +	int i;
>>   
>> -	np = of_find_compatible_node(NULL, NULL, "gpio-leds");
>> +	np = of_find_compatible_node(NULL, NULL, "warp-power-leds");
>>   	if (!np) {
>>   		printk(KERN_ERR __FILE__ ": Unable to find leds\n");
>>   		return -ENOENT;
>>   	}
>>   
>> -	for_each_child_of_node(np, child)
>> -		if (of_node_name_eq(child, "green"))
>> -			green_led = of_get_gpio(child, 0);
>> -		else if (of_node_name_eq(child, "red"))
>> -			red_led = of_get_gpio(child, 0);
>> +	for_each_child_of_node(np, child) {
>> +		for (i = 0; i < ARRAY_SIZE(warp_gpio_led_pins); i++) {
>> +			led = &warp_gpio_led_pins[i];
>> +
>> +			if (!of_node_name_eq(child, led->name))
>> +				continue;
>> +
>> +			if (led->gpiod) {
>> +				printk(KERN_ERR __FILE__ ": %s led has already been defined\n",
>> +				       led->name);
>> +				continue;
>> +			}
>> +
>> +			gpio = fwnode_gpiod_get_index(of_fwnode_handle(child),
>> +						      NULL, 0, GPIOD_ASIS,
>> +						      led->name);
>> +			error = PTR_ERR_OR_ZERO(gpio);
>> +			if (error) {
>> +				printk(KERN_ERR __FILE__ ": Failed to get %s led gpio: %d\n",
>> +				       led->name, error);
>> +				of_node_put(child);
>> +				goto err_cleanup_pins;
>> +			}
>> +
>> +			led->gpiod = gpio;
>> +			led_count++;
>> +		}
>> +	}
>>   
>>   	of_node_put(np);
>>   
>> +	/* Skip device registration if no leds have been defined */
>> +	if (led_count) {
>> +		error = platform_device_register(&warp_gpio_leds);
>> +		if (error) {
>> +			printk(KERN_ERR __FILE__ ": Unable to add leds-gpio: %d\n",
>> +			       error);
>> +			goto err_cleanup_pins;
>> +		}
>> +	}
>> +
>>   	return 0;
>> +
>> +err_cleanup_pins:
>> +	for (i = 0; i < ARRAY_SIZE(warp_gpio_led_pins); i++) {
>> +		led = &warp_gpio_led_pins[i];
>> +		gpiod_put(led->gpiod);
>> +		led->gpiod = NULL;
>> +	}
>> +	return error;
>>   }
>>   
>>   static void pika_setup_critical_temp(struct device_node *np,
>> -- 
>> 2.38.0.rc1.362.ged0d419d3c-goog
>>
>>
>> -- 
>> Dmitry
> 


More information about the Linuxppc-dev mailing list