[PATCH net-next v2 00/11] net: pcs: Add support for devices probed in the "usual" manner

[Andrew Lunn]

On Thu, Nov 10, 2022 at 03:29:26PM +0000, Vladimir Oltean wrote:
> On Thu, Nov 10, 2022 at 09:55:32AM -0500, Sean Anderson wrote:
> > On 11/9/22 17:41, Vladimir Oltean wrote:
> > > On Thu, Nov 03, 2022 at 05:06:39PM -0400, Sean Anderson wrote:
> > >> Several (later) patches in this series cannot be applied until a stable
> > >> release has occured containing the dts updates.
> > > 
> > > New kernels must remain compatible with old device trees.
> > 
> > Well, this binding is not present in older device trees, so it needs to
> > be added before these patches can be applied. It also could be possible
> > to manually bind the driver using e.g. a helper function (like what is
> > done with lynx_pcs_create_on_bus). Of course this would be tricky,
> > because we would need to unbind any generic phy driver attached, but
> > avoid unbinding an existing Lynx PCS driver.
> 
> If you know the value of the MII_PHYSID1 and MII_PHYSID2 registers for
> these PCS devices, would it be possible to probe them in a generic way
> as MDIO devices, if they lack a compatible string?

That is not how it currently works. If a device on an MDIO bus has a
compatible, it is assumed to be an mdio device, and it is probed in a
generic way as an sort of mdio device. It could be an Ethernet switch,
or Broadcom has some generic PHYs which are mdio devices, etc.

If there is no compatible, the ID registers are read and it is assumed
to be a PHY. It will be probed as a PHY. The probe() function will be
given a phydev etc.

It will need some core changes to allow an mdio device to be probed
via the ID registers.

    Andrew