[RFC PATCH 1/6] powerpc/64s: Fix assembly to support larger values of THREAD_SIZE

[Christophe Leroy]

Le 04/11/2022 à 18:27, Andrew Donnellan a écrit :
> When CONFIG_VMAP_STACK is enabled, we set THREAD_SIZE to be at least the
> size of a page.
> 
> There's a few bits of assembly in the book3s64 code that use THREAD_SIZE in
> immediate mode instructions, which can only take an operand of up to 16
> bits signed, which isn't quite large enough.
> 
> Fix these spots to use a scratch register or use two immediate mode
> instructions instead, so we can later enable VMAP_STACK.
> 
> Signed-off-by: Andrew Donnellan <ajd at linux.ibm.com>
> ---
>   arch/powerpc/include/asm/asm-compat.h   | 2 ++
>   arch/powerpc/kernel/entry_64.S          | 4 +++-
>   arch/powerpc/kernel/irq.c               | 8 ++++++--
>   arch/powerpc/kernel/misc_64.S           | 4 +++-
>   arch/powerpc/kvm/book3s_hv_rmhandlers.S | 3 ++-
>   5 files changed, 16 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
> index 2bc53c646ccd..30dd7813bf3b 100644
> --- a/arch/powerpc/include/asm/asm-compat.h
> +++ b/arch/powerpc/include/asm/asm-compat.h
> @@ -11,6 +11,7 @@
>   #define PPC_LL		stringify_in_c(ld)
>   #define PPC_STL		stringify_in_c(std)
>   #define PPC_STLU	stringify_in_c(stdu)
> +#define PPC_STLUX	stringify_in_c(stdux)
>   #define PPC_LCMPI	stringify_in_c(cmpdi)
>   #define PPC_LCMPLI	stringify_in_c(cmpldi)
>   #define PPC_LCMP	stringify_in_c(cmpd)
> @@ -45,6 +46,7 @@
>   #define PPC_LL		stringify_in_c(lwz)
>   #define PPC_STL		stringify_in_c(stw)
>   #define PPC_STLU	stringify_in_c(stwu)
> +#define PPC_STLUX	stringify_in_c(stwux)
>   #define PPC_LCMPI	stringify_in_c(cmpwi)
>   #define PPC_LCMPLI	stringify_in_c(cmplwi)
>   #define PPC_LCMP	stringify_in_c(cmpw)
> diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
> index 3e2e37e6ecab..af25db6e0205 100644
> --- a/arch/powerpc/kernel/entry_64.S
> +++ b/arch/powerpc/kernel/entry_64.S
> @@ -238,7 +238,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
>   	/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
>   	   because we don't need to leave the 288-byte ABI gap at the
>   	   top of the kernel stack. */
> -	addi	r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE
> +	li	r9,0
> +	ori	r9,r9,THREAD_SIZE-SWITCH_FRAME_SIZE
> +	add	r7,r7,r9

So you assume THREAD_SIZE is never more than 64k ? Is that a valid 
assumption ?

What about the below instead:

	addis	r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE at ha
	addi	r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE at l

>   
>   	/*
>   	 * PMU interrupts in radix may come in here. They will use r1, not
> diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
> index 9ede61a5a469..098cf6adceec 100644
> --- a/arch/powerpc/kernel/irq.c
> +++ b/arch/powerpc/kernel/irq.c
> @@ -204,7 +204,9 @@ static __always_inline void call_do_softirq(const void *sp)
>   {
>   	/* Temporarily switch r1 to sp, call __do_softirq() then restore r1. */
>   	asm volatile (
> -		 PPC_STLU "	%%r1, %[offset](%[sp])	;"
> +		"li		%%r0, 0			;"
> +		"ori		%%r0, %%r0, %[offset]	;"

Same, you assume offset to be max 64k, is that correct ?

What about
		lis		r0, offset at h
		ori		r0, r0, offset at l

> +		 PPC_STLUX "	%%r1, %[sp], %%r0	;"
>   		"mr		%%r1, %[sp]		;"
>   		"bl		%[callee]		;"
>   		 PPC_LL "	%%r1, 0(%%r1)		;"
> @@ -256,7 +258,9 @@ static __always_inline void call_do_irq(struct pt_regs *regs, void *sp)
>   
>   	/* Temporarily switch r1 to sp, call __do_irq() then restore r1. */
>   	asm volatile (
> -		 PPC_STLU "	%%r1, %[offset](%[sp])	;"
> +		"li		%%r0, 0			;"
> +		"ori		%%r0, %%r0, %[offset]	;"
> +		 PPC_STLUX "	%%r1, %[sp], %%r0	;"

Same

>   		"mr		%%r4, %%r1		;"
>   		"mr		%%r1, %[sp]		;"
>   		"bl		%[callee]		;"
> diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
> index 36184cada00b..ff71b98500a3 100644
> --- a/arch/powerpc/kernel/misc_64.S
> +++ b/arch/powerpc/kernel/misc_64.S
> @@ -384,7 +384,9 @@ _GLOBAL(kexec_sequence)
>   	std	r0,16(r1)
>   
>   	/* switch stacks to newstack -- &kexec_stack.stack */
> -	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
> +	li	r0,0
> +	ori	r0,r0,THREAD_SIZE-STACK_FRAME_OVERHEAD
> +	stdux	r1,r3,r0

Same

>   	mr	r1,r3
>   
>   	li	r0,0
> diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> index 37f50861dd98..d05e3d324f4d 100644
> --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
> @@ -2686,7 +2686,8 @@ kvmppc_bad_host_intr:
>   	mr	r9, r1
>   	std	r1, PACAR1(r13)
>   	ld	r1, PACAEMERGSP(r13)
> -	subi	r1, r1, THREAD_SIZE/2 + INT_FRAME_SIZE
> +	subi	r1, r1, THREAD_SIZE/2
> +	subi	r1, r1, INT_FRAME_SIZE

Same, what about

	subis	r1, r1, THREAD_SIZE/2 + INT_FRAME_SIZE at ha
	subi	r1, r1, THREAD_SIZE/2 + INT_FRAME_SIZE at l

>   	std	r9, 0(r1)
>   	std	r0, GPR0(r1)
>   	std	r9, GPR1(r1)