[PATCH v5 06/16] powerpc: Fix objtool unannotated intra-function call warnings on PPC32
Christophe Leroy
christophe.leroy at csgroup.eu
Wed Nov 2 23:44:10 AEDT 2022
Le 28/10/2022 à 16:33, Sathvika Vasireddy a écrit :
> From: Christophe Leroy <christophe.leroy at csgroup.eu>
>
> Fix several annotations in assembly files on PPC32.
>
> Tested-by: Naveen N. Rao <naveen.n.rao at linux.vnet.ibm.com>
> Reviewed-by: Naveen N. Rao <naveen.n.rao at linux.vnet.ibm.com>
> Acked-by: Josh Poimboeuf <jpoimboe at kernel.org>
> Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
> [Sathvika Vasireddy: Changed subject line from "objtool/powerpc: Activate
> objtool on PPC32" to "powerpc: Fix objtool unannotated intra-function call
> warnings on PPC32", and removed Kconfig change to enable objtool, as it
> is a part of "objtool/powerpc: Enable objtool to be built on ppc" patch in
> this series.]
> Signed-off-by: Sathvika Vasireddy <sv at linux.ibm.com>
> ---
> arch/powerpc/kernel/cpu_setup_6xx.S | 26 ++++++++++++------
> arch/powerpc/kernel/entry_32.S | 9 ++++--
> arch/powerpc/kernel/head_40x.S | 5 +++-
> arch/powerpc/kernel/head_8xx.S | 5 +++-
> arch/powerpc/kernel/head_book3s_32.S | 29 ++++++++++++++------
> arch/powerpc/kernel/swsusp_32.S | 5 +++-
> arch/powerpc/kvm/fpu.S | 17 ++++++++----
> arch/powerpc/platforms/52xx/lite5200_sleep.S | 15 +++++++---
> 8 files changed, 79 insertions(+), 32 deletions(-)
You are missing cpu_setup_e500.S and head_85xx.S in
arch/powerpc/kernel/, see my commit to the cover letter.
>
> diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
> index f8b5ff64b604..f29ce3dd6140 100644
> --- a/arch/powerpc/kernel/cpu_setup_6xx.S
> +++ b/arch/powerpc/kernel/cpu_setup_6xx.S
> @@ -4,6 +4,8 @@
> * Copyright (C) 2003 Benjamin Herrenschmidt (benh at kernel.crashing.org)
> */
>
> +#include <linux/linkage.h>
> +
> #include <asm/processor.h>
> #include <asm/page.h>
> #include <asm/cputable.h>
> @@ -81,7 +83,7 @@ _GLOBAL(__setup_cpu_745x)
> blr
>
> /* Enable caches for 603's, 604, 750 & 7400 */
> -setup_common_caches:
> +SYM_FUNC_START_LOCAL(setup_common_caches)
> mfspr r11,SPRN_HID0
> andi. r0,r11,HID0_DCE
> ori r11,r11,HID0_ICE|HID0_DCE
> @@ -95,11 +97,12 @@ setup_common_caches:
> sync
> isync
> blr
> +SYM_FUNC_END(setup_common_caches)
>
> /* 604, 604e, 604ev, ...
> * Enable superscalar execution & branch history table
> */
> -setup_604_hid0:
> +SYM_FUNC_START_LOCAL(setup_604_hid0)
> mfspr r11,SPRN_HID0
> ori r11,r11,HID0_SIED|HID0_BHTE
> ori r8,r11,HID0_BTCD
> @@ -110,6 +113,7 @@ setup_604_hid0:
> sync
> isync
> blr
> +SYM_FUNC_END(setup_604_hid0)
>
> /* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
> * erratas we work around here.
> @@ -125,13 +129,14 @@ setup_604_hid0:
> * needed once we have applied workaround #5 (though it's
> * not set by Apple's firmware at least).
> */
> -setup_7400_workarounds:
> +SYM_FUNC_START_LOCAL(setup_7400_workarounds)
> mfpvr r3
> rlwinm r3,r3,0,20,31
> cmpwi 0,r3,0x0207
> ble 1f
> blr
> -setup_7410_workarounds:
> +SYM_FUNC_END(setup_7400_workarounds)
> +SYM_FUNC_START_LOCAL(setup_7410_workarounds)
> mfpvr r3
> rlwinm r3,r3,0,20,31
> cmpwi 0,r3,0x0100
> @@ -151,6 +156,7 @@ setup_7410_workarounds:
> sync
> isync
> blr
> +SYM_FUNC_END(setup_7410_workarounds)
>
> /* 740/750/7400/7410
> * Enable Store Gathering (SGE), Address Broadcast (ABE),
> @@ -158,7 +164,7 @@ setup_7410_workarounds:
> * Dynamic Power Management (DPM), Speculative (SPD)
> * Clear Instruction cache throttling (ICTC)
> */
> -setup_750_7400_hid0:
> +SYM_FUNC_START_LOCAL(setup_750_7400_hid0)
> mfspr r11,SPRN_HID0
> ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
> oris r11,r11,HID0_DPM at h
> @@ -177,12 +183,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
> sync
> isync
> blr
> +SYM_FUNC_END(setup_750_7400_hid0)
>
> /* 750cx specific
> * Looks like we have to disable NAP feature for some PLL settings...
> * (waiting for confirmation)
> */
> -setup_750cx:
> +SYM_FUNC_START_LOCAL(setup_750cx)
> mfspr r10, SPRN_HID1
> rlwinm r10,r10,4,28,31
> cmpwi cr0,r10,7
> @@ -196,11 +203,13 @@ setup_750cx:
> andc r6,r6,r7
> stw r6,CPU_SPEC_FEATURES(r4)
> blr
> +SYM_FUNC_END(setup_750cx)
>
> /* 750fx specific
> */
> -setup_750fx:
> +SYM_FUNC_START_LOCAL(setup_750fx)
> blr
> +SYM_FUNC_END(setup_750fx)
>
> /* MPC 745x
> * Enable Store Gathering (SGE), Branch Folding (FOLD)
> @@ -212,7 +221,7 @@ setup_750fx:
> * Clear Instruction cache throttling (ICTC)
> * Enable L2 HW prefetch
> */
> -setup_745x_specifics:
> +SYM_FUNC_START_LOCAL(setup_745x_specifics)
> /* We check for the presence of an L3 cache setup by
> * the firmware. If any, we disable NAP capability as
> * it's known to be bogus on rev 2.1 and earlier
> @@ -270,6 +279,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
> sync
> isync
> blr
> +SYM_FUNC_END(setup_745x_specifics)
>
> /*
> * Initialize the FPU registers. This is needed to work around an errata
> diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
> index 3fc7c9886bb7..5e0763be1549 100644
> --- a/arch/powerpc/kernel/entry_32.S
> +++ b/arch/powerpc/kernel/entry_32.S
> @@ -18,6 +18,8 @@
> #include <linux/err.h>
> #include <linux/sys.h>
> #include <linux/threads.h>
> +#include <linux/linkage.h>
> +
> #include <asm/reg.h>
> #include <asm/page.h>
> #include <asm/mmu.h>
> @@ -74,17 +76,18 @@ _ASM_NOKPROBE_SYMBOL(prepare_transfer_to_handler)
> #endif /* CONFIG_PPC_BOOK3S_32 || CONFIG_PPC_E500 */
>
> #if defined(CONFIG_PPC_KUEP) && defined(CONFIG_PPC_BOOK3S_32)
> - .globl __kuep_lock
> -__kuep_lock:
> +SYM_FUNC_START(__kuep_lock)
> lwz r9, THREAD+THSR0(r2)
> update_user_segments_by_4 r9, r10, r11, r12
> blr
> +SYM_FUNC_END(__kuep_lock)
>
> -__kuep_unlock:
> +SYM_FUNC_START_LOCAL(__kuep_unlock)
> lwz r9, THREAD+THSR0(r2)
> rlwinm r9,r9,0,~SR_NX
> update_user_segments_by_4 r9, r10, r11, r12
> blr
> +SYM_FUNC_END(__kuep_unlock)
>
> .macro kuep_lock
> bl __kuep_lock
> diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
> index 088f500896c7..9110fe9d6747 100644
> --- a/arch/powerpc/kernel/head_40x.S
> +++ b/arch/powerpc/kernel/head_40x.S
> @@ -28,6 +28,8 @@
> #include <linux/init.h>
> #include <linux/pgtable.h>
> #include <linux/sizes.h>
> +#include <linux/linkage.h>
> +
> #include <asm/processor.h>
> #include <asm/page.h>
> #include <asm/mmu.h>
> @@ -662,7 +664,7 @@ start_here:
> * kernel initialization. This maps the first 32 MBytes of memory 1:1
> * virtual to physical and more importantly sets the cache mode.
> */
> -initial_mmu:
> +SYM_FUNC_START_LOCAL(initial_mmu)
> tlbia /* Invalidate all TLB entries */
> isync
>
> @@ -711,6 +713,7 @@ initial_mmu:
> mtspr SPRN_EVPR,r0
>
> blr
> +SYM_FUNC_END(initial_mmu)
>
> _GLOBAL(abort)
> mfspr r13,SPRN_DBCR0
> diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
> index 0b05f2be66b9..c94ed5a08c93 100644
> --- a/arch/powerpc/kernel/head_8xx.S
> +++ b/arch/powerpc/kernel/head_8xx.S
> @@ -18,6 +18,8 @@
> #include <linux/magic.h>
> #include <linux/pgtable.h>
> #include <linux/sizes.h>
> +#include <linux/linkage.h>
> +
> #include <asm/processor.h>
> #include <asm/page.h>
> #include <asm/mmu.h>
> @@ -625,7 +627,7 @@ start_here:
> * 24 Mbytes of data, and the 512k IMMR space. Anything not covered by
> * these mappings is mapped by page tables.
> */
> -initial_mmu:
> +SYM_FUNC_START_LOCAL(initial_mmu)
> li r8, 0
> mtspr SPRN_MI_CTR, r8 /* remove PINNED ITLB entries */
> lis r10, MD_TWAM at h
> @@ -686,6 +688,7 @@ initial_mmu:
> #endif
> mtspr SPRN_DER, r8
> blr
> +SYM_FUNC_END(initial_mmu)
>
> _GLOBAL(mmu_pin_tlb)
> lis r9, (1f - PAGE_OFFSET)@h
> diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
> index 519b60695167..4af12447dc0b 100644
> --- a/arch/powerpc/kernel/head_book3s_32.S
> +++ b/arch/powerpc/kernel/head_book3s_32.S
> @@ -18,6 +18,8 @@
>
> #include <linux/init.h>
> #include <linux/pgtable.h>
> +#include <linux/linkage.h>
> +
> #include <asm/reg.h>
> #include <asm/page.h>
> #include <asm/mmu.h>
> @@ -877,7 +879,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_HPTE_TABLE)
> * Load stuff into the MMU. Intended to be called with
> * IR=0 and DR=0.
> */
> -early_hash_table:
> +SYM_FUNC_START_LOCAL(early_hash_table)
> sync /* Force all PTE updates to finish */
> isync
> tlbia /* Clear all TLB entries */
> @@ -888,8 +890,9 @@ early_hash_table:
> ori r6, r6, 3 /* 256kB table */
> mtspr SPRN_SDR1, r6
> blr
> +SYM_FUNC_END(early_hash_table)
>
> -load_up_mmu:
> +SYM_FUNC_START_LOCAL(load_up_mmu)
> sync /* Force all PTE updates to finish */
> isync
> tlbia /* Clear all TLB entries */
> @@ -918,6 +921,7 @@ BEGIN_MMU_FTR_SECTION
> LOAD_BAT(7,r3,r4,r5)
> END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
> blr
> +SYM_FUNC_END(load_up_mmu)
>
> _GLOBAL(load_segment_registers)
> li r0, NUM_USER_SEGMENTS /* load up user segment register values */
> @@ -1028,7 +1032,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_HPTE_TABLE)
> * this makes sure it's done.
> * -- Cort
> */
> -clear_bats:
> +SYM_FUNC_START_LOCAL(clear_bats)
> li r10,0
>
> mtspr SPRN_DBAT0U,r10
> @@ -1072,6 +1076,7 @@ BEGIN_MMU_FTR_SECTION
> mtspr SPRN_IBAT7L,r10
> END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
> blr
> +SYM_FUNC_END(clear_bats)
>
> _GLOBAL(update_bats)
> lis r4, 1f at h
> @@ -1108,15 +1113,16 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
> mtspr SPRN_SRR1, r6
> rfi
>
> -flush_tlbs:
> +SYM_FUNC_START_LOCAL(flush_tlbs)
> lis r10, 0x40
> 1: addic. r10, r10, -0x1000
> tlbie r10
> bgt 1b
> sync
> blr
> +SYM_FUNC_END(flush_tlbs)
>
> -mmu_off:
> +SYM_FUNC_START_LOCAL(mmu_off)
> addi r4, r3, __after_mmu_off - _start
> mfmsr r3
> andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */
> @@ -1128,9 +1134,10 @@ mmu_off:
> mtspr SPRN_SRR1,r3
> sync
> rfi
> +SYM_FUNC_END(mmu_off)
>
> /* We use one BAT to map up to 256M of RAM at _PAGE_OFFSET */
> -initial_bats:
> +SYM_FUNC_START_LOCAL(initial_bats)
> lis r11,PAGE_OFFSET at h
> tophys(r8,r11)
> #ifdef CONFIG_SMP
> @@ -1146,9 +1153,10 @@ initial_bats:
> mtspr SPRN_IBAT0U,r11
> isync
> blr
> +SYM_FUNC_END(initial_bats)
>
> #ifdef CONFIG_BOOTX_TEXT
> -setup_disp_bat:
> +SYM_FUNC_START_LOCAL(setup_disp_bat)
> /*
> * setup the display bat prepared for us in prom.c
> */
> @@ -1164,10 +1172,11 @@ setup_disp_bat:
> mtspr SPRN_DBAT3L,r8
> mtspr SPRN_DBAT3U,r11
> blr
> +SYM_FUNC_END(setup_disp_bat)
> #endif /* CONFIG_BOOTX_TEXT */
>
> #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
> -setup_cpm_bat:
> +SYM_FUNC_START_LOCAL(setup_cpm_bat)
> lis r8, 0xf000
> ori r8, r8, 0x002a
> mtspr SPRN_DBAT1L, r8
> @@ -1177,10 +1186,11 @@ setup_cpm_bat:
> mtspr SPRN_DBAT1U, r11
>
> blr
> +SYM_FUNC_END(setup_cpm_bat)
> #endif
>
> #ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
> -setup_usbgecko_bat:
> +SYM_FUNC_START_LOCAL(setup_usbgecko_bat)
> /* prepare a BAT for early io */
> #if defined(CONFIG_GAMECUBE)
> lis r8, 0x0c00
> @@ -1199,6 +1209,7 @@ setup_usbgecko_bat:
> mtspr SPRN_DBAT1L, r8
> mtspr SPRN_DBAT1U, r11
> blr
> +SYM_FUNC_END(setup_usbgecko_bat)
> #endif
>
> .data
> diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S
> index e0cbd63007f2..ffb79326483c 100644
> --- a/arch/powerpc/kernel/swsusp_32.S
> +++ b/arch/powerpc/kernel/swsusp_32.S
> @@ -1,5 +1,7 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> #include <linux/threads.h>
> +#include <linux/linkage.h>
> +
> #include <asm/processor.h>
> #include <asm/page.h>
> #include <asm/cputable.h>
> @@ -400,7 +402,7 @@ _ASM_NOKPROBE_SYMBOL(swsusp_arch_resume)
> /* FIXME:This construct is actually not useful since we don't shut
> * down the instruction MMU, we could just flip back MSR-DR on.
> */
> -turn_on_mmu:
> +SYM_FUNC_START_LOCAL(turn_on_mmu)
> mflr r4
> mtsrr0 r4
> mtsrr1 r3
> @@ -408,4 +410,5 @@ turn_on_mmu:
> isync
> rfi
> _ASM_NOKPROBE_SYMBOL(turn_on_mmu)
> +SYM_FUNC_END(turn_on_mmu)
>
> diff --git a/arch/powerpc/kvm/fpu.S b/arch/powerpc/kvm/fpu.S
> index 315c94946bad..b68e7f26a81f 100644
> --- a/arch/powerpc/kvm/fpu.S
> +++ b/arch/powerpc/kvm/fpu.S
> @@ -6,6 +6,8 @@
> */
>
> #include <linux/pgtable.h>
> +#include <linux/linkage.h>
> +
> #include <asm/reg.h>
> #include <asm/page.h>
> #include <asm/mmu.h>
> @@ -110,18 +112,22 @@ FPS_THREE_IN(fsel)
> * R8 = (double*)¶m3 [load_three]
> * LR = instruction call function
> */
> -fpd_load_three:
> +SYM_FUNC_START_LOCAL(fpd_load_three)
> lfd 2,0(r8) /* load param3 */
> -fpd_load_two:
> +SYM_FUNC_START_LOCAL(fpd_load_two)
> lfd 1,0(r7) /* load param2 */
> -fpd_load_one:
> +SYM_FUNC_START_LOCAL(fpd_load_one)
> lfd 0,0(r6) /* load param1 */
> -fpd_load_none:
> +SYM_FUNC_START_LOCAL(fpd_load_none)
> lfd 3,0(r3) /* load up fpscr value */
> MTFSF_L(3)
> lwz r6, 0(r4) /* load cr */
> mtcr r6
> blr
> +SYM_FUNC_END(fpd_load_none)
> +SYM_FUNC_END(fpd_load_one)
> +SYM_FUNC_END(fpd_load_two)
> +SYM_FUNC_END(fpd_load_three)
>
> /*
> * End of double instruction processing
> @@ -131,13 +137,14 @@ fpd_load_none:
> * R5 = (double*)&result
> * LR = caller of instruction call function
> */
> -fpd_return:
> +SYM_FUNC_START_LOCAL(fpd_return)
> mfcr r6
> stfd 0,0(r5) /* save result */
> mffs 0
> stfd 0,0(r3) /* save new fpscr value */
> stw r6,0(r4) /* save new cr value */
> blr
> +SYM_FUNC_END(fpd_return)
>
> /*
> * Double operation with no input operand
> diff --git a/arch/powerpc/platforms/52xx/lite5200_sleep.S b/arch/powerpc/platforms/52xx/lite5200_sleep.S
> index afee8b1515a8..0b12647e7b42 100644
> --- a/arch/powerpc/platforms/52xx/lite5200_sleep.S
> +++ b/arch/powerpc/platforms/52xx/lite5200_sleep.S
> @@ -1,4 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> +#include <linux/linkage.h>
> +
> #include <asm/reg.h>
> #include <asm/ppc_asm.h>
> #include <asm/processor.h>
> @@ -178,7 +180,8 @@ sram_code:
>
>
> /* local udelay in sram is needed */
> - udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
> +SYM_FUNC_START_LOCAL(udelay)
> + /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
> mullw r12, r12, r11
> mftb r13 /* start */
> add r12, r13, r12 /* end */
> @@ -187,6 +190,7 @@ sram_code:
> cmp cr0, r13, r12
> blt 1b
> blr
> +SYM_FUNC_END(udelay)
>
> sram_code_end:
>
> @@ -271,7 +275,7 @@ _ASM_NOKPROBE_SYMBOL(lite5200_wakeup)
> SAVE_SR(n+2, addr+2); \
> SAVE_SR(n+3, addr+3);
>
> -save_regs:
> +SYM_FUNC_START_LOCAL(save_regs)
> stw r0, 0(r4)
> stw r1, 0x4(r4)
> stw r2, 0x8(r4)
> @@ -317,6 +321,7 @@ save_regs:
> SAVE_SPRN(TBRU, 0x5b)
>
> blr
> +SYM_FUNC_END(save_regs)
>
>
> /* restore registers */
> @@ -336,7 +341,7 @@ save_regs:
> LOAD_SR(n+2, addr+2); \
> LOAD_SR(n+3, addr+3);
>
> -restore_regs:
> +SYM_FUNC_START_LOCAL(restore_regs)
> lis r4, registers at h
> ori r4, r4, registers at l
>
> @@ -393,6 +398,7 @@ restore_regs:
>
> blr
> _ASM_NOKPROBE_SYMBOL(restore_regs)
> +SYM_FUNC_END(restore_regs)
>
>
>
> @@ -403,7 +409,7 @@ _ASM_NOKPROBE_SYMBOL(restore_regs)
> * Flush data cache
> * Do this by just reading lots of stuff into the cache.
> */
> -flush_data_cache:
> +SYM_FUNC_START_LOCAL(flush_data_cache)
> lis r3,CONFIG_KERNEL_START at h
> ori r3,r3,CONFIG_KERNEL_START at l
> li r4,NUM_CACHE_LINES
> @@ -413,3 +419,4 @@ flush_data_cache:
> addi r3,r3,L1_CACHE_BYTES /* Next line, please */
> bdnz 1b
> blr
> +SYM_FUNC_END(flush_data_cache)
More information about the Linuxppc-dev
mailing list