[PATCH net-next] eth: de4x5: remove support for Generic DECchip & DIGITAL EtherWORKS PCI/EISA
Jakub Kicinski
kuba at kernel.org
Thu May 19 13:13:45 AEST 2022
Looks like almost all changes to this driver had been tree-wide
refactoring since git era begun. There is one commit from Al
15 years ago which could potentially be fixing a real bug.
The driver is using virt_to_bus() and is a real magnet for pointless
cleanups. It seems unlikely to have real users. Let's try to shed
this maintenance burden.
Signed-off-by: Jakub Kicinski <kuba at kernel.org>
---
CC: corbet at lwn.net
CC: tsbogend at alpha.franken.de
CC: mpe at ellerman.id.au
CC: benh at kernel.crashing.org
CC: paulus at samba.org
CC: sburla at marvell.com
CC: vburru at marvell.com
CC: aayarekar at marvell.com
CC: arnd at arndb.de
CC: zhangyue1 at kylinos.cn
CC: linux-doc at vger.kernel.org
CC: linux-mips at vger.kernel.org
CC: linuxppc-dev at lists.ozlabs.org
CC: linux-parisc at vger.kernel.org
---
.../device_drivers/ethernet/dec/de4x5.rst | 189 -
.../device_drivers/ethernet/index.rst | 1 -
arch/mips/configs/mtx1_defconfig | 1 -
arch/powerpc/configs/chrp32_defconfig | 1 -
arch/powerpc/configs/ppc6xx_defconfig | 1 -
drivers/net/ethernet/dec/tulip/Kconfig | 15 -
drivers/net/ethernet/dec/tulip/Makefile | 1 -
drivers/net/ethernet/dec/tulip/de4x5.c | 5591 -----------------
drivers/net/ethernet/dec/tulip/de4x5.h | 1017 ---
9 files changed, 6817 deletions(-)
delete mode 100644 Documentation/networking/device_drivers/ethernet/dec/de4x5.rst
delete mode 100644 drivers/net/ethernet/dec/tulip/de4x5.c
delete mode 100644 drivers/net/ethernet/dec/tulip/de4x5.h
diff --git a/Documentation/networking/device_drivers/ethernet/dec/de4x5.rst b/Documentation/networking/device_drivers/ethernet/dec/de4x5.rst
deleted file mode 100644
index e03e9c631879..000000000000
--- a/Documentation/networking/device_drivers/ethernet/dec/de4x5.rst
+++ /dev/null
@@ -1,189 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-===================================
-DEC EtherWORKS Ethernet De4x5 cards
-===================================
-
- Originally, this driver was written for the Digital Equipment
- Corporation series of EtherWORKS Ethernet cards:
-
- - DE425 TP/COAX EISA
- - DE434 TP PCI
- - DE435 TP/COAX/AUI PCI
- - DE450 TP/COAX/AUI PCI
- - DE500 10/100 PCI Fasternet
-
- but it will now attempt to support all cards which conform to the
- Digital Semiconductor SROM Specification. The driver currently
- recognises the following chips:
-
- - DC21040 (no SROM)
- - DC21041[A]
- - DC21140[A]
- - DC21142
- - DC21143
-
- So far the driver is known to work with the following cards:
-
- - KINGSTON
- - Linksys
- - ZNYX342
- - SMC8432
- - SMC9332 (w/new SROM)
- - ZNYX31[45]
- - ZNYX346 10/100 4 port (can act as a 10/100 bridge!)
-
- The driver has been tested on a relatively busy network using the DE425,
- DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred
- 16M of data to a DECstation 5000/200 as follows::
-
- TCP UDP
- TX RX TX RX
- DE425 1030k 997k 1170k 1128k
- DE434 1063k 995k 1170k 1125k
- DE435 1063k 995k 1170k 1125k
- DE500 1063k 998k 1170k 1125k in 10Mb/s mode
-
- All values are typical (in kBytes/sec) from a sample of 4 for each
- measurement. Their error is +/-20k on a quiet (private) network and also
- depend on what load the CPU has.
-
-----------------------------------------------------------------------------
-
- The ability to load this driver as a loadable module has been included
- and used extensively during the driver development (to save those long
- reboot sequences). Loadable module support under PCI and EISA has been
- achieved by letting the driver autoprobe as if it were compiled into the
- kernel. Do make sure you're not sharing interrupts with anything that
- cannot accommodate interrupt sharing!
-
- To utilise this ability, you have to do 8 things:
-
- 0) have a copy of the loadable modules code installed on your system.
- 1) copy de4x5.c from the /linux/drivers/net directory to your favourite
- temporary directory.
- 2) for fixed autoprobes (not recommended), edit the source code near
- line 5594 to reflect the I/O address you're using, or assign these when
- loading by::
-
- insmod de4x5 io=0xghh where g = bus number
- hh = device number
-
- .. note::
-
- autoprobing for modules is now supported by default. You may just
- use::
-
- insmod de4x5
-
- to load all available boards. For a specific board, still use
- the 'io=?' above.
- 3) compile de4x5.c, but include -DMODULE in the command line to ensure
- that the correct bits are compiled (see end of source code).
- 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
- kernel with the de4x5 configuration turned off and reboot.
- 5) insmod de4x5 [io=0xghh]
- 6) run the net startup bits for your new eth?? interface(s) manually
- (usually /etc/rc.inet[12] at boot time).
- 7) enjoy!
-
- To unload a module, turn off the associated interface(s)
- 'ifconfig eth?? down' then 'rmmod de4x5'.
-
- Automedia detection is included so that in principle you can disconnect
- from, e.g. TP, reconnect to BNC and things will still work (after a
- pause while the driver figures out where its media went). My tests
- using ping showed that it appears to work....
-
- By default, the driver will now autodetect any DECchip based card.
- Should you have a need to restrict the driver to DIGITAL only cards, you
- can compile with a DEC_ONLY define, or if loading as a module, use the
- 'dec_only=1' parameter.
-
- I've changed the timing routines to use the kernel timer and scheduling
- functions so that the hangs and other assorted problems that occurred
- while autosensing the media should be gone. A bonus for the DC21040
- auto media sense algorithm is that it can now use one that is more in
- line with the rest (the DC21040 chip doesn't have a hardware timer).
- The downside is the 1 'jiffies' (10ms) resolution.
-
- IEEE 802.3u MII interface code has been added in anticipation that some
- products may use it in the future.
-
- The SMC9332 card has a non-compliant SROM which needs fixing - I have
- patched this driver to detect it because the SROM format used complies
- to a previous DEC-STD format.
-
- I have removed the buffer copies needed for receive on Intels. I cannot
- remove them for Alphas since the Tulip hardware only does longword
- aligned DMA transfers and the Alphas get alignment traps with non
- longword aligned data copies (which makes them really slow). No comment.
-
- I have added SROM decoding routines to make this driver work with any
- card that supports the Digital Semiconductor SROM spec. This will help
- all cards running the dc2114x series chips in particular. Cards using
- the dc2104x chips should run correctly with the basic driver. I'm in
- debt to <mjacob at feral.com> for the testing and feedback that helped get
- this feature working. So far we have tested KINGSTON, SMC8432, SMC9332
- (with the latest SROM complying with the SROM spec V3: their first was
- broken), ZNYX342 and LinkSys. ZNYX314 (dual 21041 MAC) and ZNYX 315
- (quad 21041 MAC) cards also appear to work despite their incorrectly
- wired IRQs.
-
- I have added a temporary fix for interrupt problems when some SCSI cards
- share the same interrupt as the DECchip based cards. The problem occurs
- because the SCSI card wants to grab the interrupt as a fast interrupt
- (runs the service routine with interrupts turned off) vs. this card
- which really needs to run the service routine with interrupts turned on.
- This driver will now add the interrupt service routine as a fast
- interrupt if it is bounced from the slow interrupt. THIS IS NOT A
- RECOMMENDED WAY TO RUN THE DRIVER and has been done for a limited time
- until people sort out their compatibility issues and the kernel
- interrupt service code is fixed. YOU SHOULD SEPARATE OUT THE FAST
- INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not
- run on the same interrupt. PCMCIA/CardBus is another can of worms...
-
- Finally, I think I have really fixed the module loading problem with
- more than one DECchip based card. As a side effect, I don't mess with
- the device structure any more which means that if more than 1 card in
- 2.0.x is installed (4 in 2.1.x), the user will have to edit
- linux/drivers/net/Space.c to make room for them. Hence, module loading
- is the preferred way to use this driver, since it doesn't have this
- limitation.
-
- Where SROM media detection is used and full duplex is specified in the
- SROM, the feature is ignored unless lp->params.fdx is set at compile
- time OR during a module load (insmod de4x5 args='eth??:fdx' [see
- below]). This is because there is no way to automatically detect full
- duplex links except through autonegotiation. When I include the
- autonegotiation feature in the SROM autoconf code, this detection will
- occur automatically for that case.
-
- Command line arguments are now allowed, similar to passing arguments
- through LILO. This will allow a per adapter board set up of full duplex
- and media. The only lexical constraints are: the board name (dev->name)
- appears in the list before its parameters. The list of parameters ends
- either at the end of the parameter list or with another board name. The
- following parameters are allowed:
-
- ========= ===============================================
- fdx for full duplex
- autosense to set the media/speed; with the following
- sub-parameters:
- TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO
- ========= ===============================================
-
- Case sensitivity is important for the sub-parameters. They *must* be
- upper case. Examples::
-
- insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
-
- For a compiled in driver, in linux/drivers/net/CONFIG, place e.g.::
-
- DE4X5_OPTS = -DDE4X5_PARM='"eth0:fdx autosense=AUI eth2:autosense=TP"'
-
- Yes, I know full duplex isn't permissible on BNC or AUI; they're just
- examples. By default, full duplex is turned off and AUTO is the default
- autosense setting. In reality, I expect only the full duplex option to
- be used. Note the use of single quotes in the two examples above and the
- lack of commas to separate items.
diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst
index 21a97703421d..4e06684d079b 100644
--- a/Documentation/networking/device_drivers/ethernet/index.rst
+++ b/Documentation/networking/device_drivers/ethernet/index.rst
@@ -19,7 +19,6 @@ Device drivers for Ethernet and Ethernet-based virtual function devices.
cirrus/cs89x0
dlink/dl2k
davicom/dm9000
- dec/de4x5
dec/dmfe
freescale/dpaa
freescale/dpaa2/index
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 0cb4d9aa14d1..4194e79b435c 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -277,7 +277,6 @@ CONFIG_CHELSIO_T1=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
-CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index a4a805b87469..fb314f75ad4b 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -53,7 +53,6 @@ CONFIG_ATA_GENERIC=y
CONFIG_NETDEVICES=y
CONFIG_PCNET32=y
CONFIG_NET_TULIP=y
-CONFIG_DE4X5=y
CONFIG_MV643XX_ETH=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index a991413f1e33..4c0d650f4d2c 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -442,7 +442,6 @@ CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
CONFIG_TULIP_MMIO=y
-CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig
index 79dc336ce709..078a12f07e96 100644
--- a/drivers/net/ethernet/dec/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -104,21 +104,6 @@ config TULIP_DM910X
def_bool y
depends on TULIP && SPARC
-config DE4X5
- tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
- depends on (PCI || EISA)
- depends on VIRT_TO_BUS || ALPHA || PPC || SPARC
- select CRC32
- help
- This is support for the DIGITAL series of PCI/EISA Ethernet cards.
- These include the DE425, DE434, DE435, DE450 and DE500 models. If
- you have a network card of this type, say Y. More specific
- information is contained in
- <file:Documentation/networking/device_drivers/ethernet/dec/de4x5.rst>.
-
- To compile this driver as a module, choose M here. The module will
- be called de4x5.
-
config WINBOND_840
tristate "Winbond W89c840 Ethernet support"
depends on PCI
diff --git a/drivers/net/ethernet/dec/tulip/Makefile b/drivers/net/ethernet/dec/tulip/Makefile
index 8aab37564d5d..d4f1d21d29a0 100644
--- a/drivers/net/ethernet/dec/tulip/Makefile
+++ b/drivers/net/ethernet/dec/tulip/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_DM9102) += dmfe.o
obj-$(CONFIG_WINBOND_840) += winbond-840.o
obj-$(CONFIG_DE2104X) += de2104x.o
obj-$(CONFIG_TULIP) += tulip.o
-obj-$(CONFIG_DE4X5) += de4x5.o
obj-$(CONFIG_ULI526X) += uli526x.o
# Declare multi-part drivers.
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
deleted file mode 100644
index 71730ef4cd57..000000000000
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ /dev/null
@@ -1,5591 +0,0 @@
-/* de4x5.c: A DIGITAL DC21x4x DECchip and DE425/DE434/DE435/DE450/DE500
- ethernet driver for Linux.
-
- Copyright 1994, 1995 Digital Equipment Corporation.
-
- Testing resources for this driver have been made available
- in part by NASA Ames Research Center (mjacob at nas.nasa.gov).
-
- The author may be reached at davies at maniac.ultranet.com.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Originally, this driver was written for the Digital Equipment
- Corporation series of EtherWORKS ethernet cards:
-
- DE425 TP/COAX EISA
- DE434 TP PCI
- DE435 TP/COAX/AUI PCI
- DE450 TP/COAX/AUI PCI
- DE500 10/100 PCI Fasternet
-
- but it will now attempt to support all cards which conform to the
- Digital Semiconductor SROM Specification. The driver currently
- recognises the following chips:
-
- DC21040 (no SROM)
- DC21041[A]
- DC21140[A]
- DC21142
- DC21143
-
- So far the driver is known to work with the following cards:
-
- KINGSTON
- Linksys
- ZNYX342
- SMC8432
- SMC9332 (w/new SROM)
- ZNYX31[45]
- ZNYX346 10/100 4 port (can act as a 10/100 bridge!)
-
- The driver has been tested on a relatively busy network using the DE425,
- DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred
- 16M of data to a DECstation 5000/200 as follows:
-
- TCP UDP
- TX RX TX RX
- DE425 1030k 997k 1170k 1128k
- DE434 1063k 995k 1170k 1125k
- DE435 1063k 995k 1170k 1125k
- DE500 1063k 998k 1170k 1125k in 10Mb/s mode
-
- All values are typical (in kBytes/sec) from a sample of 4 for each
- measurement. Their error is +/-20k on a quiet (private) network and also
- depend on what load the CPU has.
-
- =========================================================================
- This driver has been written substantially from scratch, although its
- inheritance of style and stack interface from 'ewrk3.c' and in turn from
- Donald Becker's 'lance.c' should be obvious. With the module autoload of
- every usable DECchip board, I pinched Donald's 'next_module' field to
- link my modules together.
-
- Up to 15 EISA cards can be supported under this driver, limited primarily
- by the available IRQ lines. I have checked different configurations of
- multiple depca, EtherWORKS 3 cards and de4x5 cards and have not found a
- problem yet (provided you have at least depca.c v0.38) ...
-
- PCI support has been added to allow the driver to work with the DE434,
- DE435, DE450 and DE500 cards. The I/O accesses are a bit of a kludge due
- to the differences in the EISA and PCI CSR address offsets from the base
- address.
-
- The ability to load this driver as a loadable module has been included
- and used extensively during the driver development (to save those long
- reboot sequences). Loadable module support under PCI and EISA has been
- achieved by letting the driver autoprobe as if it were compiled into the
- kernel. Do make sure you're not sharing interrupts with anything that
- cannot accommodate interrupt sharing!
-
- To utilise this ability, you have to do 8 things:
-
- 0) have a copy of the loadable modules code installed on your system.
- 1) copy de4x5.c from the /linux/drivers/net directory to your favourite
- temporary directory.
- 2) for fixed autoprobes (not recommended), edit the source code near
- line 5594 to reflect the I/O address you're using, or assign these when
- loading by:
-
- insmod de4x5 io=0xghh where g = bus number
- hh = device number
-
- NB: autoprobing for modules is now supported by default. You may just
- use:
-
- insmod de4x5
-
- to load all available boards. For a specific board, still use
- the 'io=?' above.
- 3) compile de4x5.c, but include -DMODULE in the command line to ensure
- that the correct bits are compiled (see end of source code).
- 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
- kernel with the de4x5 configuration turned off and reboot.
- 5) insmod de4x5 [io=0xghh]
- 6) run the net startup bits for your new eth?? interface(s) manually
- (usually /etc/rc.inet[12] at boot time).
- 7) enjoy!
-
- To unload a module, turn off the associated interface(s)
- 'ifconfig eth?? down' then 'rmmod de4x5'.
-
- Automedia detection is included so that in principal you can disconnect
- from, e.g. TP, reconnect to BNC and things will still work (after a
- pause whilst the driver figures out where its media went). My tests
- using ping showed that it appears to work....
-
- By default, the driver will now autodetect any DECchip based card.
- Should you have a need to restrict the driver to DIGITAL only cards, you
- can compile with a DEC_ONLY define, or if loading as a module, use the
- 'dec_only=1' parameter.
-
- I've changed the timing routines to use the kernel timer and scheduling
- functions so that the hangs and other assorted problems that occurred
- while autosensing the media should be gone. A bonus for the DC21040
- auto media sense algorithm is that it can now use one that is more in
- line with the rest (the DC21040 chip doesn't have a hardware timer).
- The downside is the 1 'jiffies' (10ms) resolution.
-
- IEEE 802.3u MII interface code has been added in anticipation that some
- products may use it in the future.
-
- The SMC9332 card has a non-compliant SROM which needs fixing - I have
- patched this driver to detect it because the SROM format used complies
- to a previous DEC-STD format.
-
- I have removed the buffer copies needed for receive on Intels. I cannot
- remove them for Alphas since the Tulip hardware only does longword
- aligned DMA transfers and the Alphas get alignment traps with non
- longword aligned data copies (which makes them really slow). No comment.
-
- I have added SROM decoding routines to make this driver work with any
- card that supports the Digital Semiconductor SROM spec. This will help
- all cards running the dc2114x series chips in particular. Cards using
- the dc2104x chips should run correctly with the basic driver. I'm in
- debt to <mjacob at feral.com> for the testing and feedback that helped get
- this feature working. So far we have tested KINGSTON, SMC8432, SMC9332
- (with the latest SROM complying with the SROM spec V3: their first was
- broken), ZNYX342 and LinkSys. ZYNX314 (dual 21041 MAC) and ZNYX 315
- (quad 21041 MAC) cards also appear to work despite their incorrectly
- wired IRQs.
-
- I have added a temporary fix for interrupt problems when some SCSI cards
- share the same interrupt as the DECchip based cards. The problem occurs
- because the SCSI card wants to grab the interrupt as a fast interrupt
- (runs the service routine with interrupts turned off) vs. this card
- which really needs to run the service routine with interrupts turned on.
- This driver will now add the interrupt service routine as a fast
- interrupt if it is bounced from the slow interrupt. THIS IS NOT A
- RECOMMENDED WAY TO RUN THE DRIVER and has been done for a limited time
- until people sort out their compatibility issues and the kernel
- interrupt service code is fixed. YOU SHOULD SEPARATE OUT THE FAST
- INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not
- run on the same interrupt. PCMCIA/CardBus is another can of worms...
-
- Finally, I think I have really fixed the module loading problem with
- more than one DECchip based card. As a side effect, I don't mess with
- the device structure any more which means that if more than 1 card in
- 2.0.x is installed (4 in 2.1.x), the user will have to edit
- linux/drivers/net/Space.c to make room for them. Hence, module loading
- is the preferred way to use this driver, since it doesn't have this
- limitation.
-
- Where SROM media detection is used and full duplex is specified in the
- SROM, the feature is ignored unless lp->params.fdx is set at compile
- time OR during a module load (insmod de4x5 args='eth??:fdx' [see
- below]). This is because there is no way to automatically detect full
- duplex links except through autonegotiation. When I include the
- autonegotiation feature in the SROM autoconf code, this detection will
- occur automatically for that case.
-
- Command line arguments are now allowed, similar to passing arguments
- through LILO. This will allow a per adapter board set up of full duplex
- and media. The only lexical constraints are: the board name (dev->name)
- appears in the list before its parameters. The list of parameters ends
- either at the end of the parameter list or with another board name. The
- following parameters are allowed:
-
- fdx for full duplex
- autosense to set the media/speed; with the following
- sub-parameters:
- TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO
-
- Case sensitivity is important for the sub-parameters. They *must* be
- upper case. Examples:
-
- insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
-
- For a compiled in driver, at or above line 548, place e.g.
- #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP"
-
- Yes, I know full duplex isn't permissible on BNC or AUI; they're just
- examples. By default, full duplex is turned off and AUTO is the default
- autosense setting. In reality, I expect only the full duplex option to
- be used. Note the use of single quotes in the two examples above and the
- lack of commas to separate items. ALSO, you must get the requested media
- correct in relation to what the adapter SROM says it has. There's no way
- to determine this in advance other than by trial and error and common
- sense, e.g. call a BNC connectored port 'BNC', not '10Mb'.
-
- Changed the bus probing. EISA used to be done first, followed by PCI.
- Most people probably don't even know what a de425 is today and the EISA
- probe has messed up some SCSI cards in the past, so now PCI is always
- probed first followed by EISA if a) the architecture allows EISA and
- either b) there have been no PCI cards detected or c) an EISA probe is
- forced by the user. To force a probe include "force_eisa" in your
- insmod "args" line; for built-in kernels either change the driver to do
- this automatically or include #define DE4X5_FORCE_EISA on or before
- line 1040 in the driver.
-
- TO DO:
- ------
-
- Revision History
- ----------------
-
- Version Date Description
-
- 0.1 17-Nov-94 Initial writing. ALPHA code release.
- 0.2 13-Jan-95 Added PCI support for DE435's.
- 0.21 19-Jan-95 Added auto media detection.
- 0.22 10-Feb-95 Fix interrupt handler call <chris at cosy.sbg.ac.at>.
- Fix recognition bug reported by <bkm at star.rl.ac.uk>.
- Add request/release_region code.
- Add loadable modules support for PCI.
- Clean up loadable modules support.
- 0.23 28-Feb-95 Added DC21041 and DC21140 support.
- Fix missed frame counter value and initialisation.
- Fixed EISA probe.
- 0.24 11-Apr-95 Change delay routine to use <linux/udelay>.
- Change TX_BUFFS_AVAIL macro.
- Change media autodetection to allow manual setting.
- Completed DE500 (DC21140) support.
- 0.241 18-Apr-95 Interim release without DE500 Autosense Algorithm.
- 0.242 10-May-95 Minor changes.
- 0.30 12-Jun-95 Timer fix for DC21140.
- Portability changes.
- Add ALPHA changes from <jestabro at ant.tay1.dec.com>.
- Add DE500 semi automatic autosense.
- Add Link Fail interrupt TP failure detection.
- Add timer based link change detection.
- Plugged a memory leak in de4x5_queue_pkt().
- 0.31 13-Jun-95 Fixed PCI stuff for 1.3.1.
- 0.32 26-Jun-95 Added verify_area() calls in de4x5_ioctl() from a
- suggestion by <heiko at colossus.escape.de>.
- 0.33 8-Aug-95 Add shared interrupt support (not released yet).
- 0.331 21-Aug-95 Fix de4x5_open() with fast CPUs.
- Fix de4x5_interrupt().
- Fix dc21140_autoconf() mess.
- No shared interrupt support.
- 0.332 11-Sep-95 Added MII management interface routines.
- 0.40 5-Mar-96 Fix setup frame timeout <maartenb at hpkuipc.cern.ch>.
- Add kernel timer code (h/w is too flaky).
- Add MII based PHY autosense.
- Add new multicasting code.
- Add new autosense algorithms for media/mode
- selection using kernel scheduling/timing.
- Re-formatted.
- Made changes suggested by <jeff at router.patch.net>:
- Change driver to detect all DECchip based cards
- with DEC_ONLY restriction a special case.
- Changed driver to autoprobe as a module. No irq
- checking is done now - assume BIOS is good!
- Added SMC9332 detection <manabe at Roy.dsl.tutics.ac.jp>
- 0.41 21-Mar-96 Don't check for get_hw_addr checksum unless DEC card
- only <niles at axp745gsfc.nasa.gov>
- Fix for multiple PCI cards reported by <jos at xos.nl>
- Duh, put the IRQF_SHARED flag into request_interrupt().
- Fix SMC ethernet address in enet_det[].
- Print chip name instead of "UNKNOWN" during boot.
- 0.42 26-Apr-96 Fix MII write TA bit error.
- Fix bug in dc21040 and dc21041 autosense code.
- Remove buffer copies on receive for Intels.
- Change sk_buff handling during media disconnects to
- eliminate DUP packets.
- Add dynamic TX thresholding.
- Change all chips to use perfect multicast filtering.
- Fix alloc_device() bug <jari at markkus2.fimr.fi>
- 0.43 21-Jun-96 Fix unconnected media TX retry bug.
- Add Accton to the list of broken cards.
- Fix TX under-run bug for non DC21140 chips.
- Fix boot command probe bug in alloc_device() as
- reported by <koen.gadeyne at barco.com> and
- <orava at nether.tky.hut.fi>.
- Add cache locks to prevent a race condition as
- reported by <csd at microplex.com> and
- <baba at beckman.uiuc.edu>.
- Upgraded alloc_device() code.
- 0.431 28-Jun-96 Fix potential bug in queue_pkt() from discussion
- with <csd at microplex.com>
- 0.44 13-Aug-96 Fix RX overflow bug in 2114[023] chips.
- Fix EISA probe bugs reported by <os2 at kpi.kharkov.ua>
- and <michael at compurex.com>.
- 0.441 9-Sep-96 Change dc21041_autoconf() to probe quiet BNC media
- with a loopback packet.
- 0.442 9-Sep-96 Include AUI in dc21041 media printout. Bug reported
- by <bhat at mundook.cs.mu.OZ.AU>
- 0.45 8-Dec-96 Include endian functions for PPC use, from work
- by <cort at cs.nmt.edu> and <g.thomas at opengroup.org>.
- 0.451 28-Dec-96 Added fix to allow autoprobe for modules after
- suggestion from <mjacob at feral.com>.
- 0.5 30-Jan-97 Added SROM decoding functions.
- Updated debug flags.
- Fix sleep/wakeup calls for PCI cards, bug reported
- by <cross at gweep.lkg.dec.com>.
- Added multi-MAC, one SROM feature from discussion
- with <mjacob at feral.com>.
- Added full module autoprobe capability.
- Added attempt to use an SMC9332 with broken SROM.
- Added fix for ZYNX multi-mac cards that didn't
- get their IRQs wired correctly.
- 0.51 13-Feb-97 Added endian fixes for the SROM accesses from
- <paubert at iram.es>
- Fix init_connection() to remove extra device reset.
- Fix MAC/PHY reset ordering in dc21140m_autoconf().
- Fix initialisation problem with lp->timeout in
- typeX_infoblock() from <paubert at iram.es>.
- Fix MII PHY reset problem from work done by
- <paubert at iram.es>.
- 0.52 26-Apr-97 Some changes may not credit the right people -
- a disk crash meant I lost some mail.
- Change RX interrupt routine to drop rather than
- defer packets to avoid hang reported by
- <g.thomas at opengroup.org>.
- Fix srom_exec() to return for COMPACT and type 1
- infoblocks.
- Added DC21142 and DC21143 functions.
- Added byte counters from <phil at tazenda.demon.co.uk>
- Added IRQF_DISABLED temporary fix from
- <mjacob at feral.com>.
- 0.53 12-Nov-97 Fix the *_probe() to include 'eth??' name during
- module load: bug reported by
- <Piete.Brooks at cl.cam.ac.uk>
- Fix multi-MAC, one SROM, to work with 2114x chips:
- bug reported by <cmetz at inner.net>.
- Make above search independent of BIOS device scan
- direction.
- Completed DC2114[23] autosense functions.
- 0.531 21-Dec-97 Fix DE500-XA 100Mb/s bug reported by
- <robin at intercore.com
- Fix type1_infoblock() bug introduced in 0.53, from
- problem reports by
- <parmee at postecss.ncrfran.france.ncr.com> and
- <jo at ice.dillingen.baynet.de>.
- Added argument list to set up each board from either
- a module's command line or a compiled in #define.
- Added generic MII PHY functionality to deal with
- newer PHY chips.
- Fix the mess in 2.1.67.
- 0.532 5-Jan-98 Fix bug in mii_get_phy() reported by
- <redhat at cococo.net>.
- Fix bug in pci_probe() for 64 bit systems reported
- by <belliott at accessone.com>.
- 0.533 9-Jan-98 Fix more 64 bit bugs reported by <jal at cs.brown.edu>.
- 0.534 24-Jan-98 Fix last (?) endian bug from <geert at linux-m68k.org>
- 0.535 21-Feb-98 Fix Ethernet Address PROM reset bug for DC21040.
- 0.536 21-Mar-98 Change pci_probe() to use the pci_dev structure.
- **Incompatible with 2.0.x from here.**
- 0.540 5-Jul-98 Atomicize assertion of dev->interrupt for SMP
- from <lma at varesearch.com>
- Add TP, AUI and BNC cases to 21140m_autoconf() for
- case where a 21140 under SROM control uses, e.g. AUI
- from problem report by <delchini at lpnp09.in2p3.fr>
- Add MII parallel detection to 2114x_autoconf() for
- case where no autonegotiation partner exists from
- problem report by <mlapsley at ndirect.co.uk>.
- Add ability to force connection type directly even
- when using SROM control from problem report by
- <earl at exis.net>.
- Updated the PCI interface to conform with the latest
- version. I hope nothing is broken...
- Add TX done interrupt modification from suggestion
- by <Austin.Donnelly at cl.cam.ac.uk>.
- Fix is_anc_capable() bug reported by
- <Austin.Donnelly at cl.cam.ac.uk>.
- Fix type[13]_infoblock() bug: during MII search, PHY
- lp->rst not run because lp->ibn not initialised -
- from report & fix by <paubert at iram.es>.
- Fix probe bug with EISA & PCI cards present from
- report by <eirik at netcom.com>.
- 0.541 24-Aug-98 Fix compiler problems associated with i386-string
- ops from multiple bug reports and temporary fix
- from <paubert at iram.es>.
- Fix pci_probe() to correctly emulate the old
- pcibios_find_class() function.
- Add an_exception() for old ZYNX346 and fix compile
- warning on PPC & SPARC, from <ecd at skynet.be>.
- Fix lastPCI to correctly work with compiled in
- kernels and modules from bug report by
- <Zlatko.Calusic at CARNet.hr> et al.
- 0.542 15-Sep-98 Fix dc2114x_autoconf() to stop multiple messages
- when media is unconnected.
- Change dev->interrupt to lp->interrupt to ensure
- alignment for Alpha's and avoid their unaligned
- access traps. This flag is merely for log messages:
- should do something more definitive though...
- 0.543 30-Dec-98 Add SMP spin locking.
- 0.544 8-May-99 Fix for buggy SROM in Motorola embedded boards using
- a 21143 by <mmporter at home.com>.
- Change PCI/EISA bus probing order.
- 0.545 28-Nov-99 Further Moto SROM bug fix from
- <mporter at eng.mcd.mot.com>
- Remove double checking for DEBUG_RX in de4x5_dbg_rx()
- from report by <geert at linux-m68k.org>
- 0.546 22-Feb-01 Fixes Alpha XP1000 oops. The srom_search function
- was causing a page fault when initializing the
- variable 'pb', on a non de4x5 PCI device, in this
- case a PCI bridge (DEC chip 21152). The value of
- 'pb' is now only initialized if a de4x5 chip is
- present.
- <france at handhelds.org>
- 0.547 08-Nov-01 Use library crc32 functions by <Matt_Domsch at dell.com>
- 0.548 30-Aug-03 Big 2.6 cleanup. Ported to PCI/EISA probing and
- generic DMA APIs. Fixed DE425 support on Alpha.
- <maz at wild-wind.fr.eu.org>
- =========================================================================
-*/
-
-#include <linux/compat.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/eisa.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/crc32.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/time.h>
-#include <linux/types.h>
-#include <linux/unistd.h>
-#include <linux/ctype.h>
-#include <linux/dma-mapping.h>
-#include <linux/moduleparam.h>
-#include <linux/bitops.h>
-#include <linux/gfp.h>
-
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/byteorder.h>
-#include <asm/unaligned.h>
-#include <linux/uaccess.h>
-#ifdef CONFIG_PPC_PMAC
-#include <asm/machdep.h>
-#endif /* CONFIG_PPC_PMAC */
-
-#include "de4x5.h"
-
-static const char version[] =
- KERN_INFO "de4x5.c:V0.546 2001/02/22 davies at maniac.ultranet.com\n";
-
-#define c_char const char
-
-/*
-** MII Information
-*/
-struct phy_table {
- int reset; /* Hard reset required? */
- int id; /* IEEE OUI */
- int ta; /* One cycle TA time - 802.3u is confusing here */
- struct { /* Non autonegotiation (parallel) speed det. */
- int reg;
- int mask;
- int value;
- } spd;
-};
-
-struct mii_phy {
- int reset; /* Hard reset required? */
- int id; /* IEEE OUI */
- int ta; /* One cycle TA time */
- struct { /* Non autonegotiation (parallel) speed det. */
- int reg;
- int mask;
- int value;
- } spd;
- int addr; /* MII address for the PHY */
- u_char *gep; /* Start of GEP sequence block in SROM */
- u_char *rst; /* Start of reset sequence in SROM */
- u_int mc; /* Media Capabilities */
- u_int ana; /* NWay Advertisement */
- u_int fdx; /* Full DupleX capabilities for each media */
- u_int ttm; /* Transmit Threshold Mode for each media */
- u_int mci; /* 21142 MII Connector Interrupt info */
-};
-
-#define DE4X5_MAX_PHY 8 /* Allow up to 8 attached PHY devices per board */
-
-struct sia_phy {
- u_char mc; /* Media Code */
- u_char ext; /* csr13-15 valid when set */
- int csr13; /* SIA Connectivity Register */
- int csr14; /* SIA TX/RX Register */
- int csr15; /* SIA General Register */
- int gepc; /* SIA GEP Control Information */
- int gep; /* SIA GEP Data */
-};
-
-/*
-** Define the know universe of PHY devices that can be
-** recognised by this driver.
-*/
-static struct phy_table phy_info[] = {
- {0, NATIONAL_TX, 1, {0x19, 0x40, 0x00}}, /* National TX */
- {1, BROADCOM_T4, 1, {0x10, 0x02, 0x02}}, /* Broadcom T4 */
- {0, SEEQ_T4 , 1, {0x12, 0x10, 0x10}}, /* SEEQ T4 */
- {0, CYPRESS_T4 , 1, {0x05, 0x20, 0x20}}, /* Cypress T4 */
- {0, 0x7810 , 1, {0x14, 0x0800, 0x0800}} /* Level One LTX970 */
-};
-
-/*
-** These GENERIC values assumes that the PHY devices follow 802.3u and
-** allow parallel detection to set the link partner ability register.
-** Detection of 100Base-TX [H/F Duplex] and 100Base-T4 is supported.
-*/
-#define GENERIC_REG 0x05 /* Autoneg. Link Partner Advertisement Reg. */
-#define GENERIC_MASK MII_ANLPA_100M /* All 100Mb/s Technologies */
-#define GENERIC_VALUE MII_ANLPA_100M /* 100B-TX, 100B-TX FDX, 100B-T4 */
-
-/*
-** Define special SROM detection cases
-*/
-static c_char enet_det[][ETH_ALEN] = {
- {0x00, 0x00, 0xc0, 0x00, 0x00, 0x00},
- {0x00, 0x00, 0xe8, 0x00, 0x00, 0x00}
-};
-
-#define SMC 1
-#define ACCTON 2
-
-/*
-** SROM Repair definitions. If a broken SROM is detected a card may
-** use this information to help figure out what to do. This is a
-** "stab in the dark" and so far for SMC9332's only.
-*/
-static c_char srom_repair_info[][100] = {
- {0x00,0x1e,0x00,0x00,0x00,0x08, /* SMC9332 */
- 0x1f,0x01,0x8f,0x01,0x00,0x01,0x00,0x02,
- 0x01,0x00,0x00,0x78,0xe0,0x01,0x00,0x50,
- 0x00,0x18,}
-};
-
-
-#ifdef DE4X5_DEBUG
-static int de4x5_debug = DE4X5_DEBUG;
-#else
-/*static int de4x5_debug = (DEBUG_MII | DEBUG_SROM | DEBUG_PCICFG | DEBUG_MEDIA | DEBUG_VERSION);*/
-static int de4x5_debug = (DEBUG_MEDIA | DEBUG_VERSION);
-#endif
-
-/*
-** Allow per adapter set up. For modules this is simply a command line
-** parameter, e.g.:
-** insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
-**
-** For a compiled in driver, place e.g.
-** #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP"
-** here
-*/
-#ifdef DE4X5_PARM
-static char *args = DE4X5_PARM;
-#else
-static char *args;
-#endif
-
-struct parameters {
- bool fdx;
- int autosense;
-};
-
-#define DE4X5_AUTOSENSE_MS 250 /* msec autosense tick (DE500) */
-
-#define DE4X5_NDA 0xffe0 /* No Device (I/O) Address */
-
-/*
-** Ethernet PROM defines
-*/
-#define PROBE_LENGTH 32
-#define ETH_PROM_SIG 0xAA5500FFUL
-
-/*
-** Ethernet Info
-*/
-#define PKT_BUF_SZ 1536 /* Buffer size for each Tx/Rx buffer */
-#define IEEE802_3_SZ 1518 /* Packet + CRC */
-#define MAX_PKT_SZ 1514 /* Maximum ethernet packet length */
-#define MAX_DAT_SZ 1500 /* Maximum ethernet data length */
-#define MIN_DAT_SZ 1 /* Minimum ethernet data length */
-#define PKT_HDR_LEN 14 /* Addresses and data length info */
-#define FAKE_FRAME_LEN (MAX_PKT_SZ + 1)
-#define QUEUE_PKT_TIMEOUT (3*HZ) /* 3 second timeout */
-
-
-/*
-** EISA bus defines
-*/
-#define DE4X5_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */
-#define DE4X5_EISA_TOTAL_SIZE 0x100 /* I/O address extent */
-
-#define EISA_ALLOWED_IRQ_LIST {5, 9, 10, 11}
-
-#define DE4X5_SIGNATURE {"DE425","DE434","DE435","DE450","DE500"}
-#define DE4X5_NAME_LENGTH 8
-
-static c_char *de4x5_signatures[] = DE4X5_SIGNATURE;
-
-/*
-** Ethernet PROM defines for DC21040
-*/
-#define PROBE_LENGTH 32
-#define ETH_PROM_SIG 0xAA5500FFUL
-
-/*
-** PCI Bus defines
-*/
-#define PCI_MAX_BUS_NUM 8
-#define DE4X5_PCI_TOTAL_SIZE 0x80 /* I/O address extent */
-#define DE4X5_CLASS_CODE 0x00020000 /* Network controller, Ethernet */
-
-/*
-** Memory Alignment. Each descriptor is 4 longwords long. To force a
-** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
-** DESC_ALIGN. ALIGN aligns the start address of the private memory area
-** and hence the RX descriptor ring's first entry.
-*/
-#define DE4X5_ALIGN4 ((u_long)4 - 1) /* 1 longword align */
-#define DE4X5_ALIGN8 ((u_long)8 - 1) /* 2 longword align */
-#define DE4X5_ALIGN16 ((u_long)16 - 1) /* 4 longword align */
-#define DE4X5_ALIGN32 ((u_long)32 - 1) /* 8 longword align */
-#define DE4X5_ALIGN64 ((u_long)64 - 1) /* 16 longword align */
-#define DE4X5_ALIGN128 ((u_long)128 - 1) /* 32 longword align */
-
-#define DE4X5_ALIGN DE4X5_ALIGN32 /* Keep the DC21040 happy... */
-#define DE4X5_CACHE_ALIGN CAL_16LONG
-#define DESC_SKIP_LEN DSL_0 /* Must agree with DESC_ALIGN */
-/*#define DESC_ALIGN u32 dummy[4]; / * Must agree with DESC_SKIP_LEN */
-#define DESC_ALIGN
-
-#ifndef DEC_ONLY /* See README.de4x5 for using this */
-static int dec_only;
-#else
-static int dec_only = 1;
-#endif
-
-/*
-** DE4X5 IRQ ENABLE/DISABLE
-*/
-#define ENABLE_IRQs { \
- imr |= lp->irq_en;\
- outl(imr, DE4X5_IMR); /* Enable the IRQs */\
-}
-
-#define DISABLE_IRQs {\
- imr = inl(DE4X5_IMR);\
- imr &= ~lp->irq_en;\
- outl(imr, DE4X5_IMR); /* Disable the IRQs */\
-}
-
-#define UNMASK_IRQs {\
- imr |= lp->irq_mask;\
- outl(imr, DE4X5_IMR); /* Unmask the IRQs */\
-}
-
-#define MASK_IRQs {\
- imr = inl(DE4X5_IMR);\
- imr &= ~lp->irq_mask;\
- outl(imr, DE4X5_IMR); /* Mask the IRQs */\
-}
-
-/*
-** DE4X5 START/STOP
-*/
-#define START_DE4X5 {\
- omr = inl(DE4X5_OMR);\
- omr |= OMR_ST | OMR_SR;\
- outl(omr, DE4X5_OMR); /* Enable the TX and/or RX */\
-}
-
-#define STOP_DE4X5 {\
- omr = inl(DE4X5_OMR);\
- omr &= ~(OMR_ST|OMR_SR);\
- outl(omr, DE4X5_OMR); /* Disable the TX and/or RX */ \
-}
-
-/*
-** DE4X5 SIA RESET
-*/
-#define RESET_SIA outl(0, DE4X5_SICR); /* Reset SIA connectivity regs */
-
-/*
-** DE500 AUTOSENSE TIMER INTERVAL (MILLISECS)
-*/
-#define DE4X5_AUTOSENSE_MS 250
-
-/*
-** SROM Structure
-*/
-struct de4x5_srom {
- char sub_vendor_id[2];
- char sub_system_id[2];
- char reserved[12];
- char id_block_crc;
- char reserved2;
- char version;
- char num_controllers;
- char ieee_addr[6];
- char info[100];
- short chksum;
-};
-#define SUB_VENDOR_ID 0x500a
-
-/*
-** DE4X5 Descriptors. Make sure that all the RX buffers are contiguous
-** and have sizes of both a power of 2 and a multiple of 4.
-** A size of 256 bytes for each buffer could be chosen because over 90% of
-** all packets in our network are <256 bytes long and 64 longword alignment
-** is possible. 1536 showed better 'ttcp' performance. Take your pick. 32 TX
-** descriptors are needed for machines with an ALPHA CPU.
-*/
-#define NUM_RX_DESC 8 /* Number of RX descriptors */
-#define NUM_TX_DESC 32 /* Number of TX descriptors */
-#define RX_BUFF_SZ 1536 /* Power of 2 for kmalloc and */
- /* Multiple of 4 for DC21040 */
- /* Allows 512 byte alignment */
-struct de4x5_desc {
- volatile __le32 status;
- __le32 des1;
- __le32 buf;
- __le32 next;
- DESC_ALIGN
-};
-
-/*
-** The DE4X5 private structure
-*/
-#define DE4X5_PKT_STAT_SZ 16
-#define DE4X5_PKT_BIN_SZ 128 /* Should be >=100 unless you
- increase DE4X5_PKT_STAT_SZ */
-
-struct pkt_stats {
- u_int bins[DE4X5_PKT_STAT_SZ]; /* Private stats counters */
- u_int unicast;
- u_int multicast;
- u_int broadcast;
- u_int excessive_collisions;
- u_int tx_underruns;
- u_int excessive_underruns;
- u_int rx_runt_frames;
- u_int rx_collision;
- u_int rx_dribble;
- u_int rx_overflow;
-};
-
-struct de4x5_private {
- char adapter_name[80]; /* Adapter name */
- u_long interrupt; /* Aligned ISR flag */
- struct de4x5_desc *rx_ring; /* RX descriptor ring */
- struct de4x5_desc *tx_ring; /* TX descriptor ring */
- struct sk_buff *tx_skb[NUM_TX_DESC]; /* TX skb for freeing when sent */
- struct sk_buff *rx_skb[NUM_RX_DESC]; /* RX skb's */
- int rx_new, rx_old; /* RX descriptor ring pointers */
- int tx_new, tx_old; /* TX descriptor ring pointers */
- char setup_frame[SETUP_FRAME_LEN]; /* Holds MCA and PA info. */
- char frame[64]; /* Min sized packet for loopback*/
- spinlock_t lock; /* Adapter specific spinlock */
- struct net_device_stats stats; /* Public stats */
- struct pkt_stats pktStats; /* Private stats counters */
- char rxRingSize;
- char txRingSize;
- int bus; /* EISA or PCI */
- int bus_num; /* PCI Bus number */
- int device; /* Device number on PCI bus */
- int state; /* Adapter OPENED or CLOSED */
- int chipset; /* DC21040, DC21041 or DC21140 */
- s32 irq_mask; /* Interrupt Mask (Enable) bits */
- s32 irq_en; /* Summary interrupt bits */
- int media; /* Media (eg TP), mode (eg 100B)*/
- int c_media; /* Remember the last media conn */
- bool fdx; /* media full duplex flag */
- int linkOK; /* Link is OK */
- int autosense; /* Allow/disallow autosensing */
- bool tx_enable; /* Enable descriptor polling */
- int setup_f; /* Setup frame filtering type */
- int local_state; /* State within a 'media' state */
- struct mii_phy phy[DE4X5_MAX_PHY]; /* List of attached PHY devices */
- struct sia_phy sia; /* SIA PHY Information */
- int active; /* Index to active PHY device */
- int mii_cnt; /* Number of attached PHY's */
- int timeout; /* Scheduling counter */
- struct timer_list timer; /* Timer info for kernel */
- int tmp; /* Temporary global per card */
- struct {
- u_long lock; /* Lock the cache accesses */
- s32 csr0; /* Saved Bus Mode Register */
- s32 csr6; /* Saved Operating Mode Reg. */
- s32 csr7; /* Saved IRQ Mask Register */
- s32 gep; /* Saved General Purpose Reg. */
- s32 gepc; /* Control info for GEP */
- s32 csr13; /* Saved SIA Connectivity Reg. */
- s32 csr14; /* Saved SIA TX/RX Register */
- s32 csr15; /* Saved SIA General Register */
- int save_cnt; /* Flag if state already saved */
- struct sk_buff_head queue; /* Save the (re-ordered) skb's */
- } cache;
- struct de4x5_srom srom; /* A copy of the SROM */
- int cfrv; /* Card CFRV copy */
- int rx_ovf; /* Check for 'RX overflow' tag */
- bool useSROM; /* For non-DEC card use SROM */
- bool useMII; /* Infoblock using the MII */
- int asBitValid; /* Autosense bits in GEP? */
- int asPolarity; /* 0 => asserted high */
- int asBit; /* Autosense bit number in GEP */
- int defMedium; /* SROM default medium */
- int tcount; /* Last infoblock number */
- int infoblock_init; /* Initialised this infoblock? */
- int infoleaf_offset; /* SROM infoleaf for controller */
- s32 infoblock_csr6; /* csr6 value in SROM infoblock */
- int infoblock_media; /* infoblock media */
- int (*infoleaf_fn)(struct net_device *); /* Pointer to infoleaf function */
- u_char *rst; /* Pointer to Type 5 reset info */
- u_char ibn; /* Infoblock number */
- struct parameters params; /* Command line/ #defined params */
- struct device *gendev; /* Generic device */
- dma_addr_t dma_rings; /* DMA handle for rings */
- int dma_size; /* Size of the DMA area */
- char *rx_bufs; /* rx bufs on alpha, sparc, ... */
-};
-
-/*
-** To get around certain poxy cards that don't provide an SROM
-** for the second and more DECchip, I have to key off the first
-** chip's address. I'll assume there's not a bad SROM iff:
-**
-** o the chipset is the same
-** o the bus number is the same and > 0
-** o the sum of all the returned hw address bytes is 0 or 0x5fa
-**
-** Also have to save the irq for those cards whose hardware designers
-** can't follow the PCI to PCI Bridge Architecture spec.
-*/
-static struct {
- int chipset;
- int bus;
- int irq;
- u_char addr[ETH_ALEN];
-} last = {0,};
-
-/*
-** The transmit ring full condition is described by the tx_old and tx_new
-** pointers by:
-** tx_old = tx_new Empty ring
-** tx_old = tx_new+1 Full ring
-** tx_old+txRingSize = tx_new+1 Full ring (wrapped condition)
-*/
-#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\
- lp->tx_old+lp->txRingSize-lp->tx_new-1:\
- lp->tx_old -lp->tx_new-1)
-
-#define TX_PKT_PENDING (lp->tx_old != lp->tx_new)
-
-/*
-** Public Functions
-*/
-static int de4x5_open(struct net_device *dev);
-static netdev_tx_t de4x5_queue_pkt(struct sk_buff *skb,
- struct net_device *dev);
-static irqreturn_t de4x5_interrupt(int irq, void *dev_id);
-static int de4x5_close(struct net_device *dev);
-static struct net_device_stats *de4x5_get_stats(struct net_device *dev);
-static void de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len);
-static void set_multicast_list(struct net_device *dev);
-static int de4x5_siocdevprivate(struct net_device *dev, struct ifreq *rq,
- void __user *data, int cmd);
-
-/*
-** Private functions
-*/
-static int de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev);
-static int de4x5_init(struct net_device *dev);
-static int de4x5_sw_reset(struct net_device *dev);
-static int de4x5_rx(struct net_device *dev);
-static int de4x5_tx(struct net_device *dev);
-static void de4x5_ast(struct timer_list *t);
-static int de4x5_txur(struct net_device *dev);
-static int de4x5_rx_ovfc(struct net_device *dev);
-
-static int autoconf_media(struct net_device *dev);
-static void create_packet(struct net_device *dev, char *frame, int len);
-static void load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb);
-static int dc21040_autoconf(struct net_device *dev);
-static int dc21041_autoconf(struct net_device *dev);
-static int dc21140m_autoconf(struct net_device *dev);
-static int dc2114x_autoconf(struct net_device *dev);
-static int srom_autoconf(struct net_device *dev);
-static int de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, int (*fn)(struct net_device *, int), int (*asfn)(struct net_device *));
-static int dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, int next_state, int suspect_state, int (*fn)(struct net_device *, int));
-static int test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec);
-static int test_for_100Mb(struct net_device *dev, int msec);
-static int wait_for_link(struct net_device *dev);
-static int test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec);
-static int is_spd_100(struct net_device *dev);
-static int is_100_up(struct net_device *dev);
-static int is_10_up(struct net_device *dev);
-static int is_anc_capable(struct net_device *dev);
-static int ping_media(struct net_device *dev, int msec);
-static struct sk_buff *de4x5_alloc_rx_buff(struct net_device *dev, int index, int len);
-static void de4x5_free_rx_buffs(struct net_device *dev);
-static void de4x5_free_tx_buffs(struct net_device *dev);
-static void de4x5_save_skbs(struct net_device *dev);
-static void de4x5_rst_desc_ring(struct net_device *dev);
-static void de4x5_cache_state(struct net_device *dev, int flag);
-static void de4x5_put_cache(struct net_device *dev, struct sk_buff *skb);
-static void de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb);
-static struct sk_buff *de4x5_get_cache(struct net_device *dev);
-static void de4x5_setup_intr(struct net_device *dev);
-static void de4x5_init_connection(struct net_device *dev);
-static int de4x5_reset_phy(struct net_device *dev);
-static void reset_init_sia(struct net_device *dev, s32 sicr, s32 strr, s32 sigr);
-static int test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec);
-static int test_tp(struct net_device *dev, s32 msec);
-static int EISA_signature(char *name, struct device *device);
-static void PCI_signature(char *name, struct de4x5_private *lp);
-static void DevicePresent(struct net_device *dev, u_long iobase);
-static void enet_addr_rst(u_long aprom_addr);
-static int de4x5_bad_srom(struct de4x5_private *lp);
-static short srom_rd(u_long address, u_char offset);
-static void srom_latch(u_int command, u_long address);
-static void srom_command(u_int command, u_long address);
-static void srom_address(u_int command, u_long address, u_char offset);
-static short srom_data(u_int command, u_long address);
-/*static void srom_busy(u_int command, u_long address);*/
-static void sendto_srom(u_int command, u_long addr);
-static int getfrom_srom(u_long addr);
-static int srom_map_media(struct net_device *dev);
-static int srom_infoleaf_info(struct net_device *dev);
-static void srom_init(struct net_device *dev);
-static void srom_exec(struct net_device *dev, u_char *p);
-static int mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr);
-static void mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr);
-static int mii_rdata(u_long ioaddr);
-static void mii_wdata(int data, int len, u_long ioaddr);
-static void mii_ta(u_long rw, u_long ioaddr);
-static int mii_swap(int data, int len);
-static void mii_address(u_char addr, u_long ioaddr);
-static void sendto_mii(u32 command, int data, u_long ioaddr);
-static int getfrom_mii(u32 command, u_long ioaddr);
-static int mii_get_oui(u_char phyaddr, u_long ioaddr);
-static int mii_get_phy(struct net_device *dev);
-static void SetMulticastFilter(struct net_device *dev);
-static int get_hw_addr(struct net_device *dev);
-static void srom_repair(struct net_device *dev, int card);
-static int test_bad_enet(struct net_device *dev, int status);
-static int an_exception(struct de4x5_private *lp);
-static char *build_setup_frame(struct net_device *dev, int mode);
-static void disable_ast(struct net_device *dev);
-static long de4x5_switch_mac_port(struct net_device *dev);
-static int gep_rd(struct net_device *dev);
-static void gep_wr(s32 data, struct net_device *dev);
-static void yawn(struct net_device *dev, int state);
-static void de4x5_parse_params(struct net_device *dev);
-static void de4x5_dbg_open(struct net_device *dev);
-static void de4x5_dbg_mii(struct net_device *dev, int k);
-static void de4x5_dbg_media(struct net_device *dev);
-static void de4x5_dbg_srom(struct de4x5_srom *p);
-static void de4x5_dbg_rx(struct sk_buff *skb, int len);
-static int dc21041_infoleaf(struct net_device *dev);
-static int dc21140_infoleaf(struct net_device *dev);
-static int dc21142_infoleaf(struct net_device *dev);
-static int dc21143_infoleaf(struct net_device *dev);
-static int type0_infoblock(struct net_device *dev, u_char count, u_char *p);
-static int type1_infoblock(struct net_device *dev, u_char count, u_char *p);
-static int type2_infoblock(struct net_device *dev, u_char count, u_char *p);
-static int type3_infoblock(struct net_device *dev, u_char count, u_char *p);
-static int type4_infoblock(struct net_device *dev, u_char count, u_char *p);
-static int type5_infoblock(struct net_device *dev, u_char count, u_char *p);
-static int compact_infoblock(struct net_device *dev, u_char count, u_char *p);
-
-/*
-** Note now that module autoprobing is allowed under EISA and PCI. The
-** IRQ lines will not be auto-detected; instead I'll rely on the BIOSes
-** to "do the right thing".
-*/
-
-static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */
-
-module_param_hw(io, int, ioport, 0);
-module_param(de4x5_debug, int, 0);
-module_param(dec_only, int, 0);
-module_param(args, charp, 0);
-
-MODULE_PARM_DESC(io, "de4x5 I/O base address");
-MODULE_PARM_DESC(de4x5_debug, "de4x5 debug mask");
-MODULE_PARM_DESC(dec_only, "de4x5 probe only for Digital boards (0-1)");
-MODULE_PARM_DESC(args, "de4x5 full duplex and media type settings; see de4x5.c for details");
-MODULE_LICENSE("GPL");
-
-/*
-** List the SROM infoleaf functions and chipsets
-*/
-struct InfoLeaf {
- int chipset;
- int (*fn)(struct net_device *);
-};
-static struct InfoLeaf infoleaf_array[] = {
- {DC21041, dc21041_infoleaf},
- {DC21140, dc21140_infoleaf},
- {DC21142, dc21142_infoleaf},
- {DC21143, dc21143_infoleaf}
-};
-#define INFOLEAF_SIZE ARRAY_SIZE(infoleaf_array)
-
-/*
-** List the SROM info block functions
-*/
-static int (*dc_infoblock[])(struct net_device *dev, u_char, u_char *) = {
- type0_infoblock,
- type1_infoblock,
- type2_infoblock,
- type3_infoblock,
- type4_infoblock,
- type5_infoblock,
- compact_infoblock
-};
-
-#define COMPACT (ARRAY_SIZE(dc_infoblock) - 1)
-
-/*
-** Miscellaneous defines...
-*/
-#define RESET_DE4X5 {\
- int i;\
- i=inl(DE4X5_BMR);\
- mdelay(1);\
- outl(i | BMR_SWR, DE4X5_BMR);\
- mdelay(1);\
- outl(i, DE4X5_BMR);\
- mdelay(1);\
- for (i=0;i<5;i++) {inl(DE4X5_BMR); mdelay(1);}\
- mdelay(1);\
-}
-
-#define PHY_HARD_RESET {\
- outl(GEP_HRST, DE4X5_GEP); /* Hard RESET the PHY dev. */\
- mdelay(1); /* Assert for 1ms */\
- outl(0x00, DE4X5_GEP);\
- mdelay(2); /* Wait for 2ms */\
-}
-
-static const struct net_device_ops de4x5_netdev_ops = {
- .ndo_open = de4x5_open,
- .ndo_stop = de4x5_close,
- .ndo_start_xmit = de4x5_queue_pkt,
- .ndo_get_stats = de4x5_get_stats,
- .ndo_set_rx_mode = set_multicast_list,
- .ndo_siocdevprivate = de4x5_siocdevprivate,
- .ndo_set_mac_address= eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-
-static int
-de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
-{
- char name[DE4X5_NAME_LENGTH + 1];
- struct de4x5_private *lp = netdev_priv(dev);
- struct pci_dev *pdev = NULL;
- int i, status=0;
-
- dev_set_drvdata(gendev, dev);
-
- /* Ensure we're not sleeping */
- if (lp->bus == EISA) {
- outb(WAKEUP, PCI_CFPM);
- } else {
- pdev = to_pci_dev (gendev);
- pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP);
- }
- mdelay(10);
-
- RESET_DE4X5;
-
- if ((inl(DE4X5_STS) & (STS_TS | STS_RS)) != 0) {
- return -ENXIO; /* Hardware could not reset */
- }
-
- /*
- ** Now find out what kind of DC21040/DC21041/DC21140 board we have.
- */
- lp->useSROM = false;
- if (lp->bus == PCI) {
- PCI_signature(name, lp);
- } else {
- EISA_signature(name, gendev);
- }
-
- if (*name == '\0') { /* Not found a board signature */
- return -ENXIO;
- }
-
- dev->base_addr = iobase;
- printk ("%s: %s at 0x%04lx", dev_name(gendev), name, iobase);
-
- status = get_hw_addr(dev);
- printk(", h/w address %pM\n", dev->dev_addr);
-
- if (status != 0) {
- printk(" which has an Ethernet PROM CRC error.\n");
- return -ENXIO;
- } else {
- skb_queue_head_init(&lp->cache.queue);
- lp->cache.gepc = GEP_INIT;
- lp->asBit = GEP_SLNK;
- lp->asPolarity = GEP_SLNK;
- lp->asBitValid = ~0;
- lp->timeout = -1;
- lp->gendev = gendev;
- spin_lock_init(&lp->lock);
- timer_setup(&lp->timer, de4x5_ast, 0);
- de4x5_parse_params(dev);
-
- /*
- ** Choose correct autosensing in case someone messed up
- */
- lp->autosense = lp->params.autosense;
- if (lp->chipset != DC21140) {
- if ((lp->chipset==DC21040) && (lp->params.autosense&TP_NW)) {
- lp->params.autosense = TP;
- }
- if ((lp->chipset==DC21041) && (lp->params.autosense&BNC_AUI)) {
- lp->params.autosense = BNC;
- }
- }
- lp->fdx = lp->params.fdx;
- sprintf(lp->adapter_name,"%s (%s)", name, dev_name(gendev));
-
- lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc);
-#if defined(__alpha__) || defined(__powerpc__) || defined(CONFIG_SPARC) || defined(DE4X5_DO_MEMCPY)
- lp->dma_size += RX_BUFF_SZ * NUM_RX_DESC + DE4X5_ALIGN;
-#endif
- lp->rx_ring = dma_alloc_coherent(gendev, lp->dma_size,
- &lp->dma_rings, GFP_ATOMIC);
- if (lp->rx_ring == NULL) {
- return -ENOMEM;
- }
-
- lp->tx_ring = lp->rx_ring + NUM_RX_DESC;
-
- /*
- ** Set up the RX descriptor ring (Intels)
- ** Allocate contiguous receive buffers, long word aligned (Alphas)
- */
-#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
- for (i=0; i<NUM_RX_DESC; i++) {
- lp->rx_ring[i].status = 0;
- lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
- lp->rx_ring[i].buf = 0;
- lp->rx_ring[i].next = 0;
- lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */
- }
-
-#else
- {
- dma_addr_t dma_rx_bufs;
-
- dma_rx_bufs = lp->dma_rings + (NUM_RX_DESC + NUM_TX_DESC)
- * sizeof(struct de4x5_desc);
- dma_rx_bufs = (dma_rx_bufs + DE4X5_ALIGN) & ~DE4X5_ALIGN;
- lp->rx_bufs = (char *)(((long)(lp->rx_ring + NUM_RX_DESC
- + NUM_TX_DESC) + DE4X5_ALIGN) & ~DE4X5_ALIGN);
- for (i=0; i<NUM_RX_DESC; i++) {
- lp->rx_ring[i].status = 0;
- lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
- lp->rx_ring[i].buf =
- cpu_to_le32(dma_rx_bufs+i*RX_BUFF_SZ);
- lp->rx_ring[i].next = 0;
- lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */
- }
-
- }
-#endif
-
- barrier();
-
- lp->rxRingSize = NUM_RX_DESC;
- lp->txRingSize = NUM_TX_DESC;
-
- /* Write the end of list marker to the descriptor lists */
- lp->rx_ring[lp->rxRingSize - 1].des1 |= cpu_to_le32(RD_RER);
- lp->tx_ring[lp->txRingSize - 1].des1 |= cpu_to_le32(TD_TER);
-
- /* Tell the adapter where the TX/RX rings are located. */
- outl(lp->dma_rings, DE4X5_RRBA);
- outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
- DE4X5_TRBA);
-
- /* Initialise the IRQ mask and Enable/Disable */
- lp->irq_mask = IMR_RIM | IMR_TIM | IMR_TUM | IMR_UNM;
- lp->irq_en = IMR_NIM | IMR_AIM;
-
- /* Create a loopback packet frame for later media probing */
- create_packet(dev, lp->frame, sizeof(lp->frame));
-
- /* Check if the RX overflow bug needs testing for */
- i = lp->cfrv & 0x000000fe;
- if ((lp->chipset == DC21140) && (i == 0x20)) {
- lp->rx_ovf = 1;
- }
-
- /* Initialise the SROM pointers if possible */
- if (lp->useSROM) {
- lp->state = INITIALISED;
- if (srom_infoleaf_info(dev)) {
- dma_free_coherent (gendev, lp->dma_size,
- lp->rx_ring, lp->dma_rings);
- return -ENXIO;
- }
- srom_init(dev);
- }
-
- lp->state = CLOSED;
-
- /*
- ** Check for an MII interface
- */
- if ((lp->chipset != DC21040) && (lp->chipset != DC21041)) {
- mii_get_phy(dev);
- }
-
- printk(" and requires IRQ%d (provided by %s).\n", dev->irq,
- ((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG"));
- }
-
- if (de4x5_debug & DEBUG_VERSION) {
- printk(version);
- }
-
- /* The DE4X5-specific entries in the device structure. */
- SET_NETDEV_DEV(dev, gendev);
- dev->netdev_ops = &de4x5_netdev_ops;
- dev->mem_start = 0;
-
- /* Fill in the generic fields of the device structure. */
- if ((status = register_netdev (dev))) {
- dma_free_coherent (gendev, lp->dma_size,
- lp->rx_ring, lp->dma_rings);
- return status;
- }
-
- /* Let the adapter sleep to save power */
- yawn(dev, SLEEP);
-
- return status;
-}
-
-
-static int
-de4x5_open(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int i, status = 0;
- s32 omr;
-
- /* Allocate the RX buffers */
- for (i=0; i<lp->rxRingSize; i++) {
- if (de4x5_alloc_rx_buff(dev, i, 0) == NULL) {
- de4x5_free_rx_buffs(dev);
- return -EAGAIN;
- }
- }
-
- /*
- ** Wake up the adapter
- */
- yawn(dev, WAKEUP);
-
- /*
- ** Re-initialize the DE4X5...
- */
- status = de4x5_init(dev);
- spin_lock_init(&lp->lock);
- lp->state = OPEN;
- de4x5_dbg_open(dev);
-
- if (request_irq(dev->irq, de4x5_interrupt, IRQF_SHARED,
- lp->adapter_name, dev)) {
- printk("de4x5_open(): Requested IRQ%d is busy - attempting FAST/SHARE...", dev->irq);
- if (request_irq(dev->irq, de4x5_interrupt, IRQF_SHARED,
- lp->adapter_name, dev)) {
- printk("\n Cannot get IRQ- reconfigure your hardware.\n");
- disable_ast(dev);
- de4x5_free_rx_buffs(dev);
- de4x5_free_tx_buffs(dev);
- yawn(dev, SLEEP);
- lp->state = CLOSED;
- return -EAGAIN;
- } else {
- printk("\n Succeeded, but you should reconfigure your hardware to avoid this.\n");
- printk("WARNING: there may be IRQ related problems in heavily loaded systems.\n");
- }
- }
-
- lp->interrupt = UNMASK_INTERRUPTS;
- netif_trans_update(dev); /* prevent tx timeout */
-
- START_DE4X5;
-
- de4x5_setup_intr(dev);
-
- if (de4x5_debug & DEBUG_OPEN) {
- printk("\tsts: 0x%08x\n", inl(DE4X5_STS));
- printk("\tbmr: 0x%08x\n", inl(DE4X5_BMR));
- printk("\timr: 0x%08x\n", inl(DE4X5_IMR));
- printk("\tomr: 0x%08x\n", inl(DE4X5_OMR));
- printk("\tsisr: 0x%08x\n", inl(DE4X5_SISR));
- printk("\tsicr: 0x%08x\n", inl(DE4X5_SICR));
- printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR));
- printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR));
- }
-
- return status;
-}
-
-/*
-** Initialize the DE4X5 operating conditions. NB: a chip problem with the
-** DC21140 requires using perfect filtering mode for that chip. Since I can't
-** see why I'd want > 14 multicast addresses, I have changed all chips to use
-** the perfect filtering mode. Keep the DMA burst length at 8: there seems
-** to be data corruption problems if it is larger (UDP errors seen from a
-** ttcp source).
-*/
-static int
-de4x5_init(struct net_device *dev)
-{
- /* Lock out other processes whilst setting up the hardware */
- netif_stop_queue(dev);
-
- de4x5_sw_reset(dev);
-
- /* Autoconfigure the connected port */
- autoconf_media(dev);
-
- return 0;
-}
-
-static int
-de4x5_sw_reset(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int i, j, status = 0;
- s32 bmr, omr;
-
- /* Select the MII or SRL port now and RESET the MAC */
- if (!lp->useSROM) {
- if (lp->phy[lp->active].id != 0) {
- lp->infoblock_csr6 = OMR_SDP | OMR_PS | OMR_HBD;
- } else {
- lp->infoblock_csr6 = OMR_SDP | OMR_TTM;
- }
- de4x5_switch_mac_port(dev);
- }
-
- /*
- ** Set the programmable burst length to 8 longwords for all the DC21140
- ** Fasternet chips and 4 longwords for all others: DMA errors result
- ** without these values. Cache align 16 long.
- */
- bmr = (lp->chipset==DC21140 ? PBL_8 : PBL_4) | DESC_SKIP_LEN | DE4X5_CACHE_ALIGN;
- bmr |= ((lp->chipset & ~0x00ff)==DC2114x ? BMR_RML : 0);
- outl(bmr, DE4X5_BMR);
-
- omr = inl(DE4X5_OMR) & ~OMR_PR; /* Turn off promiscuous mode */
- if (lp->chipset == DC21140) {
- omr |= (OMR_SDP | OMR_SB);
- }
- lp->setup_f = PERFECT;
- outl(lp->dma_rings, DE4X5_RRBA);
- outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
- DE4X5_TRBA);
-
- lp->rx_new = lp->rx_old = 0;
- lp->tx_new = lp->tx_old = 0;
-
- for (i = 0; i < lp->rxRingSize; i++) {
- lp->rx_ring[i].status = cpu_to_le32(R_OWN);
- }
-
- for (i = 0; i < lp->txRingSize; i++) {
- lp->tx_ring[i].status = cpu_to_le32(0);
- }
-
- barrier();
-
- /* Build the setup frame depending on filtering mode */
- SetMulticastFilter(dev);
-
- load_packet(dev, lp->setup_frame, PERFECT_F|TD_SET|SETUP_FRAME_LEN, (struct sk_buff *)1);
- outl(omr|OMR_ST, DE4X5_OMR);
-
- /* Poll for setup frame completion (adapter interrupts are disabled now) */
-
- for (j=0, i=0;(i<500) && (j==0);i++) { /* Up to 500ms delay */
- mdelay(1);
- if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1;
- }
- outl(omr, DE4X5_OMR); /* Stop everything! */
-
- if (j == 0) {
- printk("%s: Setup frame timed out, status %08x\n", dev->name,
- inl(DE4X5_STS));
- status = -EIO;
- }
-
- lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
- lp->tx_old = lp->tx_new;
-
- return status;
-}
-
-/*
-** Writes a socket buffer address to the next available transmit descriptor.
-*/
-static netdev_tx_t
-de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- u_long flags = 0;
-
- netif_stop_queue(dev);
- if (!lp->tx_enable) /* Cannot send for now */
- goto tx_err;
-
- /*
- ** Clean out the TX ring asynchronously to interrupts - sometimes the
- ** interrupts are lost by delayed descriptor status updates relative to
- ** the irq assertion, especially with a busy PCI bus.
- */
- spin_lock_irqsave(&lp->lock, flags);
- de4x5_tx(dev);
- spin_unlock_irqrestore(&lp->lock, flags);
-
- /* Test if cache is already locked - requeue skb if so */
- if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt)
- goto tx_err;
-
- /* Transmit descriptor ring full or stale skb */
- if (netif_queue_stopped(dev) || (u_long) lp->tx_skb[lp->tx_new] > 1) {
- if (lp->interrupt) {
- de4x5_putb_cache(dev, skb); /* Requeue the buffer */
- } else {
- de4x5_put_cache(dev, skb);
- }
- if (de4x5_debug & DEBUG_TX) {
- printk("%s: transmit busy, lost media or stale skb found:\n STS:%08x\n tbusy:%d\n IMR:%08x\n OMR:%08x\n Stale skb: %s\n",dev->name, inl(DE4X5_STS), netif_queue_stopped(dev), inl(DE4X5_IMR), inl(DE4X5_OMR), ((u_long) lp->tx_skb[lp->tx_new] > 1) ? "YES" : "NO");
- }
- } else if (skb->len > 0) {
- /* If we already have stuff queued locally, use that first */
- if (!skb_queue_empty(&lp->cache.queue) && !lp->interrupt) {
- de4x5_put_cache(dev, skb);
- skb = de4x5_get_cache(dev);
- }
-
- while (skb && !netif_queue_stopped(dev) &&
- (u_long) lp->tx_skb[lp->tx_new] <= 1) {
- spin_lock_irqsave(&lp->lock, flags);
- netif_stop_queue(dev);
- load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb);
- lp->stats.tx_bytes += skb->len;
- outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */
-
- lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
-
- if (TX_BUFFS_AVAIL) {
- netif_start_queue(dev); /* Another pkt may be queued */
- }
- skb = de4x5_get_cache(dev);
- spin_unlock_irqrestore(&lp->lock, flags);
- }
- if (skb) de4x5_putb_cache(dev, skb);
- }
-
- lp->cache.lock = 0;
-
- return NETDEV_TX_OK;
-tx_err:
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
-}
-
-/*
-** The DE4X5 interrupt handler.
-**
-** I/O Read/Writes through intermediate PCI bridges are never 'posted',
-** so that the asserted interrupt always has some real data to work with -
-** if these I/O accesses are ever changed to memory accesses, ensure the
-** STS write is read immediately to complete the transaction if the adapter
-** is not on bus 0. Lost interrupts can still occur when the PCI bus load
-** is high and descriptor status bits cannot be set before the associated
-** interrupt is asserted and this routine entered.
-*/
-static irqreturn_t
-de4x5_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct de4x5_private *lp;
- s32 imr, omr, sts, limit;
- u_long iobase;
- unsigned int handled = 0;
-
- lp = netdev_priv(dev);
- spin_lock(&lp->lock);
- iobase = dev->base_addr;
-
- DISABLE_IRQs; /* Ensure non re-entrancy */
-
- if (test_and_set_bit(MASK_INTERRUPTS, (void*) &lp->interrupt))
- printk("%s: Re-entering the interrupt handler.\n", dev->name);
-
- synchronize_irq(dev->irq);
-
- for (limit=0; limit<8; limit++) {
- sts = inl(DE4X5_STS); /* Read IRQ status */
- outl(sts, DE4X5_STS); /* Reset the board interrupts */
-
- if (!(sts & lp->irq_mask)) break;/* All done */
- handled = 1;
-
- if (sts & (STS_RI | STS_RU)) /* Rx interrupt (packet[s] arrived) */
- de4x5_rx(dev);
-
- if (sts & (STS_TI | STS_TU)) /* Tx interrupt (packet sent) */
- de4x5_tx(dev);
-
- if (sts & STS_LNF) { /* TP Link has failed */
- lp->irq_mask &= ~IMR_LFM;
- }
-
- if (sts & STS_UNF) { /* Transmit underrun */
- de4x5_txur(dev);
- }
-
- if (sts & STS_SE) { /* Bus Error */
- STOP_DE4X5;
- printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n",
- dev->name, sts);
- spin_unlock(&lp->lock);
- return IRQ_HANDLED;
- }
- }
-
- /* Load the TX ring with any locally stored packets */
- if (!test_and_set_bit(0, (void *)&lp->cache.lock)) {
- while (!skb_queue_empty(&lp->cache.queue) && !netif_queue_stopped(dev) && lp->tx_enable) {
- de4x5_queue_pkt(de4x5_get_cache(dev), dev);
- }
- lp->cache.lock = 0;
- }
-
- lp->interrupt = UNMASK_INTERRUPTS;
- ENABLE_IRQs;
- spin_unlock(&lp->lock);
-
- return IRQ_RETVAL(handled);
-}
-
-static int
-de4x5_rx(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int entry;
- s32 status;
-
- for (entry=lp->rx_new; (s32)le32_to_cpu(lp->rx_ring[entry].status)>=0;
- entry=lp->rx_new) {
- status = (s32)le32_to_cpu(lp->rx_ring[entry].status);
-
- if (lp->rx_ovf) {
- if (inl(DE4X5_MFC) & MFC_FOCM) {
- de4x5_rx_ovfc(dev);
- break;
- }
- }
-
- if (status & RD_FS) { /* Remember the start of frame */
- lp->rx_old = entry;
- }
-
- if (status & RD_LS) { /* Valid frame status */
- if (lp->tx_enable) lp->linkOK++;
- if (status & RD_ES) { /* There was an error. */
- lp->stats.rx_errors++; /* Update the error stats. */
- if (status & (RD_RF | RD_TL)) lp->stats.rx_frame_errors++;
- if (status & RD_CE) lp->stats.rx_crc_errors++;
- if (status & RD_OF) lp->stats.rx_fifo_errors++;
- if (status & RD_TL) lp->stats.rx_length_errors++;
- if (status & RD_RF) lp->pktStats.rx_runt_frames++;
- if (status & RD_CS) lp->pktStats.rx_collision++;
- if (status & RD_DB) lp->pktStats.rx_dribble++;
- if (status & RD_OF) lp->pktStats.rx_overflow++;
- } else { /* A valid frame received */
- struct sk_buff *skb;
- short pkt_len = (short)(le32_to_cpu(lp->rx_ring[entry].status)
- >> 16) - 4;
-
- if ((skb = de4x5_alloc_rx_buff(dev, entry, pkt_len)) == NULL) {
- printk("%s: Insufficient memory; nuking packet.\n",
- dev->name);
- lp->stats.rx_dropped++;
- } else {
- de4x5_dbg_rx(skb, pkt_len);
-
- /* Push up the protocol stack */
- skb->protocol=eth_type_trans(skb,dev);
- de4x5_local_stats(dev, skb->data, pkt_len);
- netif_rx(skb);
-
- /* Update stats */
- lp->stats.rx_packets++;
- lp->stats.rx_bytes += pkt_len;
- }
- }
-
- /* Change buffer ownership for this frame, back to the adapter */
- for (;lp->rx_old!=entry;lp->rx_old=(lp->rx_old + 1)%lp->rxRingSize) {
- lp->rx_ring[lp->rx_old].status = cpu_to_le32(R_OWN);
- barrier();
- }
- lp->rx_ring[entry].status = cpu_to_le32(R_OWN);
- barrier();
- }
-
- /*
- ** Update entry information
- */
- lp->rx_new = (lp->rx_new + 1) % lp->rxRingSize;
- }
-
- return 0;
-}
-
-static inline void
-de4x5_free_tx_buff(struct de4x5_private *lp, int entry)
-{
- dma_unmap_single(lp->gendev, le32_to_cpu(lp->tx_ring[entry].buf),
- le32_to_cpu(lp->tx_ring[entry].des1) & TD_TBS1,
- DMA_TO_DEVICE);
- if ((u_long) lp->tx_skb[entry] > 1)
- dev_kfree_skb_irq(lp->tx_skb[entry]);
- lp->tx_skb[entry] = NULL;
-}
-
-/*
-** Buffer sent - check for TX buffer errors.
-*/
-static int
-de4x5_tx(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int entry;
- s32 status;
-
- for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) {
- status = (s32)le32_to_cpu(lp->tx_ring[entry].status);
- if (status < 0) { /* Buffer not sent yet */
- break;
- } else if (status != 0x7fffffff) { /* Not setup frame */
- if (status & TD_ES) { /* An error happened */
- lp->stats.tx_errors++;
- if (status & TD_NC) lp->stats.tx_carrier_errors++;
- if (status & TD_LC) lp->stats.tx_window_errors++;
- if (status & TD_UF) lp->stats.tx_fifo_errors++;
- if (status & TD_EC) lp->pktStats.excessive_collisions++;
- if (status & TD_DE) lp->stats.tx_aborted_errors++;
-
- if (TX_PKT_PENDING) {
- outl(POLL_DEMAND, DE4X5_TPD);/* Restart a stalled TX */
- }
- } else { /* Packet sent */
- lp->stats.tx_packets++;
- if (lp->tx_enable) lp->linkOK++;
- }
- /* Update the collision counter */
- lp->stats.collisions += ((status & TD_EC) ? 16 :
- ((status & TD_CC) >> 3));
-
- /* Free the buffer. */
- if (lp->tx_skb[entry] != NULL)
- de4x5_free_tx_buff(lp, entry);
- }
-
- /* Update all the pointers */
- lp->tx_old = (lp->tx_old + 1) % lp->txRingSize;
- }
-
- /* Any resources available? */
- if (TX_BUFFS_AVAIL && netif_queue_stopped(dev)) {
- if (lp->interrupt)
- netif_wake_queue(dev);
- else
- netif_start_queue(dev);
- }
-
- return 0;
-}
-
-static void
-de4x5_ast(struct timer_list *t)
-{
- struct de4x5_private *lp = from_timer(lp, t, timer);
- struct net_device *dev = dev_get_drvdata(lp->gendev);
- int next_tick = DE4X5_AUTOSENSE_MS;
- int dt;
-
- if (lp->useSROM)
- next_tick = srom_autoconf(dev);
- else if (lp->chipset == DC21140)
- next_tick = dc21140m_autoconf(dev);
- else if (lp->chipset == DC21041)
- next_tick = dc21041_autoconf(dev);
- else if (lp->chipset == DC21040)
- next_tick = dc21040_autoconf(dev);
- lp->linkOK = 0;
-
- dt = (next_tick * HZ) / 1000;
-
- if (!dt)
- dt = 1;
-
- mod_timer(&lp->timer, jiffies + dt);
-}
-
-static int
-de4x5_txur(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int omr;
-
- omr = inl(DE4X5_OMR);
- if (!(omr & OMR_SF) || (lp->chipset==DC21041) || (lp->chipset==DC21040)) {
- omr &= ~(OMR_ST|OMR_SR);
- outl(omr, DE4X5_OMR);
- while (inl(DE4X5_STS) & STS_TS);
- if ((omr & OMR_TR) < OMR_TR) {
- omr += 0x4000;
- } else {
- omr |= OMR_SF;
- }
- outl(omr | OMR_ST | OMR_SR, DE4X5_OMR);
- }
-
- return 0;
-}
-
-static int
-de4x5_rx_ovfc(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int omr;
-
- omr = inl(DE4X5_OMR);
- outl(omr & ~OMR_SR, DE4X5_OMR);
- while (inl(DE4X5_STS) & STS_RS);
-
- for (; (s32)le32_to_cpu(lp->rx_ring[lp->rx_new].status)>=0;) {
- lp->rx_ring[lp->rx_new].status = cpu_to_le32(R_OWN);
- lp->rx_new = (lp->rx_new + 1) % lp->rxRingSize;
- }
-
- outl(omr, DE4X5_OMR);
-
- return 0;
-}
-
-static int
-de4x5_close(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- s32 imr, omr;
-
- disable_ast(dev);
-
- netif_stop_queue(dev);
-
- if (de4x5_debug & DEBUG_CLOSE) {
- printk("%s: Shutting down ethercard, status was %8.8x.\n",
- dev->name, inl(DE4X5_STS));
- }
-
- /*
- ** We stop the DE4X5 here... mask interrupts and stop TX & RX
- */
- DISABLE_IRQs;
- STOP_DE4X5;
-
- /* Free the associated irq */
- free_irq(dev->irq, dev);
- lp->state = CLOSED;
-
- /* Free any socket buffers */
- de4x5_free_rx_buffs(dev);
- de4x5_free_tx_buffs(dev);
-
- /* Put the adapter to sleep to save power */
- yawn(dev, SLEEP);
-
- return 0;
-}
-
-static struct net_device_stats *
-de4x5_get_stats(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- lp->stats.rx_missed_errors = (int)(inl(DE4X5_MFC) & (MFC_OVFL | MFC_CNTR));
-
- return &lp->stats;
-}
-
-static void
-de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int i;
-
- for (i=1; i<DE4X5_PKT_STAT_SZ-1; i++) {
- if (pkt_len < (i*DE4X5_PKT_BIN_SZ)) {
- lp->pktStats.bins[i]++;
- i = DE4X5_PKT_STAT_SZ;
- }
- }
- if (is_multicast_ether_addr(buf)) {
- if (is_broadcast_ether_addr(buf)) {
- lp->pktStats.broadcast++;
- } else {
- lp->pktStats.multicast++;
- }
- } else if (ether_addr_equal(buf, dev->dev_addr)) {
- lp->pktStats.unicast++;
- }
-
- lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */
- if (lp->pktStats.bins[0] == 0) { /* Reset counters */
- memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats));
- }
-}
-
-/*
-** Removes the TD_IC flag from previous descriptor to improve TX performance.
-** If the flag is changed on a descriptor that is being read by the hardware,
-** I assume PCI transaction ordering will mean you are either successful or
-** just miss asserting the change to the hardware. Anyway you're messing with
-** a descriptor you don't own, but this shouldn't kill the chip provided
-** the descriptor register is read only to the hardware.
-*/
-static void
-load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int entry = (lp->tx_new ? lp->tx_new-1 : lp->txRingSize-1);
- dma_addr_t buf_dma = dma_map_single(lp->gendev, buf, flags & TD_TBS1, DMA_TO_DEVICE);
-
- lp->tx_ring[lp->tx_new].buf = cpu_to_le32(buf_dma);
- lp->tx_ring[lp->tx_new].des1 &= cpu_to_le32(TD_TER);
- lp->tx_ring[lp->tx_new].des1 |= cpu_to_le32(flags);
- lp->tx_skb[lp->tx_new] = skb;
- lp->tx_ring[entry].des1 &= cpu_to_le32(~TD_IC);
- barrier();
-
- lp->tx_ring[lp->tx_new].status = cpu_to_le32(T_OWN);
- barrier();
-}
-
-/*
-** Set or clear the multicast filter for this adaptor.
-*/
-static void
-set_multicast_list(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- /* First, double check that the adapter is open */
- if (lp->state == OPEN) {
- if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
- u32 omr;
- omr = inl(DE4X5_OMR);
- omr |= OMR_PR;
- outl(omr, DE4X5_OMR);
- } else {
- SetMulticastFilter(dev);
- load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
- SETUP_FRAME_LEN, (struct sk_buff *)1);
-
- lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
- outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */
- netif_trans_update(dev); /* prevent tx timeout */
- }
- }
-}
-
-/*
-** Calculate the hash code and update the logical address filter
-** from a list of ethernet multicast addresses.
-** Little endian crc one liner from Matt Thomas, DEC.
-*/
-static void
-SetMulticastFilter(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- struct netdev_hw_addr *ha;
- u_long iobase = dev->base_addr;
- int i, bit, byte;
- u16 hashcode;
- u32 omr, crc;
- char *pa;
- unsigned char *addrs;
-
- omr = inl(DE4X5_OMR);
- omr &= ~(OMR_PR | OMR_PM);
- pa = build_setup_frame(dev, ALL); /* Build the basic frame */
-
- if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 14)) {
- omr |= OMR_PM; /* Pass all multicasts */
- } else if (lp->setup_f == HASH_PERF) { /* Hash Filtering */
- netdev_for_each_mc_addr(ha, dev) {
- crc = ether_crc_le(ETH_ALEN, ha->addr);
- hashcode = crc & DE4X5_HASH_BITS; /* hashcode is 9 LSb of CRC */
-
- byte = hashcode >> 3; /* bit[3-8] -> byte in filter */
- bit = 1 << (hashcode & 0x07);/* bit[0-2] -> bit in byte */
-
- byte <<= 1; /* calc offset into setup frame */
- if (byte & 0x02) {
- byte -= 1;
- }
- lp->setup_frame[byte] |= bit;
- }
- } else { /* Perfect filtering */
- netdev_for_each_mc_addr(ha, dev) {
- addrs = ha->addr;
- for (i=0; i<ETH_ALEN; i++) {
- *(pa + (i&1)) = *addrs++;
- if (i & 0x01) pa += 4;
- }
- }
- }
- outl(omr, DE4X5_OMR);
-}
-
-#ifdef CONFIG_EISA
-
-static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST;
-
-static int de4x5_eisa_probe(struct device *gendev)
-{
- struct eisa_device *edev;
- u_long iobase;
- u_char irq, regval;
- u_short vendor;
- u32 cfid;
- int status, device;
- struct net_device *dev;
- struct de4x5_private *lp;
-
- edev = to_eisa_device (gendev);
- iobase = edev->base_addr;
-
- if (!request_region (iobase, DE4X5_EISA_TOTAL_SIZE, "de4x5"))
- return -EBUSY;
-
- if (!request_region (iobase + DE4X5_EISA_IO_PORTS,
- DE4X5_EISA_TOTAL_SIZE, "de4x5")) {
- status = -EBUSY;
- goto release_reg_1;
- }
-
- if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
- status = -ENOMEM;
- goto release_reg_2;
- }
- lp = netdev_priv(dev);
-
- cfid = (u32) inl(PCI_CFID);
- lp->cfrv = (u_short) inl(PCI_CFRV);
- device = (cfid >> 8) & 0x00ffff00;
- vendor = (u_short) cfid;
-
- /* Read the EISA Configuration Registers */
- regval = inb(EISA_REG0) & (ER0_INTL | ER0_INTT);
-#ifdef CONFIG_ALPHA
- /* Looks like the Jensen firmware (rev 2.2) doesn't really
- * care about the EISA configuration, and thus doesn't
- * configure the PLX bridge properly. Oh well... Simply mimic
- * the EISA config file to sort it out. */
-
- /* EISA REG1: Assert DecChip 21040 HW Reset */
- outb (ER1_IAM | 1, EISA_REG1);
- mdelay (1);
-
- /* EISA REG1: Deassert DecChip 21040 HW Reset */
- outb (ER1_IAM, EISA_REG1);
- mdelay (1);
-
- /* EISA REG3: R/W Burst Transfer Enable */
- outb (ER3_BWE | ER3_BRE, EISA_REG3);
-
- /* 32_bit slave/master, Preempt Time=23 bclks, Unlatched Interrupt */
- outb (ER0_BSW | ER0_BMW | ER0_EPT | regval, EISA_REG0);
-#endif
- irq = de4x5_irq[(regval >> 1) & 0x03];
-
- if (is_DC2114x) {
- device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
- }
- lp->chipset = device;
- lp->bus = EISA;
-
- /* Write the PCI Configuration Registers */
- outl(PCI_COMMAND_IO | PCI_COMMAND_MASTER, PCI_CFCS);
- outl(0x00006000, PCI_CFLT);
- outl(iobase, PCI_CBIO);
-
- DevicePresent(dev, EISA_APROM);
-
- dev->irq = irq;
-
- if (!(status = de4x5_hw_init (dev, iobase, gendev))) {
- return 0;
- }
-
- free_netdev (dev);
- release_reg_2:
- release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
- release_reg_1:
- release_region (iobase, DE4X5_EISA_TOTAL_SIZE);
-
- return status;
-}
-
-static int de4x5_eisa_remove(struct device *device)
-{
- struct net_device *dev;
- u_long iobase;
-
- dev = dev_get_drvdata(device);
- iobase = dev->base_addr;
-
- unregister_netdev (dev);
- free_netdev (dev);
- release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
- release_region (iobase, DE4X5_EISA_TOTAL_SIZE);
-
- return 0;
-}
-
-static const struct eisa_device_id de4x5_eisa_ids[] = {
- { "DEC4250", 0 }, /* 0 is the board name index... */
- { "" }
-};
-MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
-
-static struct eisa_driver de4x5_eisa_driver = {
- .id_table = de4x5_eisa_ids,
- .driver = {
- .name = "de4x5",
- .probe = de4x5_eisa_probe,
- .remove = de4x5_eisa_remove,
- }
-};
-#endif
-
-#ifdef CONFIG_PCI
-
-/*
-** This function searches the current bus (which is >0) for a DECchip with an
-** SROM, so that in multiport cards that have one SROM shared between multiple
-** DECchips, we can find the base SROM irrespective of the BIOS scan direction.
-** For single port cards this is a time waster...
-*/
-static void
-srom_search(struct net_device *dev, struct pci_dev *pdev)
-{
- u_char pb;
- u_short vendor, status;
- u_int irq = 0, device;
- u_long iobase = 0; /* Clear upper 32 bits in Alphas */
- int i, j;
- struct de4x5_private *lp = netdev_priv(dev);
- struct pci_dev *this_dev;
-
- list_for_each_entry(this_dev, &pdev->bus->devices, bus_list) {
- vendor = this_dev->vendor;
- device = this_dev->device << 8;
- if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) continue;
-
- /* Get the chip configuration revision register */
- pb = this_dev->bus->number;
-
- /* Set the device number information */
- lp->device = PCI_SLOT(this_dev->devfn);
- lp->bus_num = pb;
-
- /* Set the chipset information */
- if (is_DC2114x) {
- device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK
- ? DC21142 : DC21143);
- }
- lp->chipset = device;
-
- /* Get the board I/O address (64 bits on sparc64) */
- iobase = pci_resource_start(this_dev, 0);
-
- /* Fetch the IRQ to be used */
- irq = this_dev->irq;
- if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) continue;
-
- /* Check if I/O accesses are enabled */
- pci_read_config_word(this_dev, PCI_COMMAND, &status);
- if (!(status & PCI_COMMAND_IO)) continue;
-
- /* Search for a valid SROM attached to this DECchip */
- DevicePresent(dev, DE4X5_APROM);
- for (j=0, i=0; i<ETH_ALEN; i++) {
- j += (u_char) *((u_char *)&lp->srom + SROM_HWADD + i);
- }
- if (j != 0 && j != 6 * 0xff) {
- last.chipset = device;
- last.bus = pb;
- last.irq = irq;
- for (i=0; i<ETH_ALEN; i++) {
- last.addr[i] = (u_char)*((u_char *)&lp->srom + SROM_HWADD + i);
- }
- return;
- }
- }
-}
-
-/*
-** PCI bus I/O device probe
-** NB: PCI I/O accesses and Bus Mastering are enabled by the PCI BIOS, not
-** the driver. Some PCI BIOS's, pre V2.1, need the slot + features to be
-** enabled by the user first in the set up utility. Hence we just check for
-** enabled features and silently ignore the card if they're not.
-**
-** STOP PRESS: Some BIOS's __require__ the driver to enable the bus mastering
-** bit. Here, check for I/O accesses and then set BM. If you put the card in
-** a non BM slot, you're on your own (and complain to the PC vendor that your
-** PC doesn't conform to the PCI standard)!
-**
-** This function is only compatible with the *latest* 2.1.x kernels. For 2.0.x
-** kernels use the V0.535[n] drivers.
-*/
-
-static int de4x5_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- u_char pb, pbus = 0, dev_num, dnum = 0, timer;
- u_short vendor, status;
- u_int irq = 0, device;
- u_long iobase = 0; /* Clear upper 32 bits in Alphas */
- int error;
- struct net_device *dev;
- struct de4x5_private *lp;
-
- dev_num = PCI_SLOT(pdev->devfn);
- pb = pdev->bus->number;
-
- if (io) { /* probe a single PCI device */
- pbus = (u_short)(io >> 8);
- dnum = (u_short)(io & 0xff);
- if ((pbus != pb) || (dnum != dev_num))
- return -ENODEV;
- }
-
- vendor = pdev->vendor;
- device = pdev->device << 8;
- if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x))
- return -ENODEV;
-
- /* Ok, the device seems to be for us. */
- if ((error = pci_enable_device (pdev)))
- return error;
-
- if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
- error = -ENOMEM;
- goto disable_dev;
- }
-
- lp = netdev_priv(dev);
- lp->bus = PCI;
- lp->bus_num = 0;
-
- /* Search for an SROM on this bus */
- if (lp->bus_num != pb) {
- lp->bus_num = pb;
- srom_search(dev, pdev);
- }
-
- /* Get the chip configuration revision register */
- lp->cfrv = pdev->revision;
-
- /* Set the device number information */
- lp->device = dev_num;
- lp->bus_num = pb;
-
- /* Set the chipset information */
- if (is_DC2114x) {
- device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
- }
- lp->chipset = device;
-
- /* Get the board I/O address (64 bits on sparc64) */
- iobase = pci_resource_start(pdev, 0);
-
- /* Fetch the IRQ to be used */
- irq = pdev->irq;
- if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) {
- error = -ENODEV;
- goto free_dev;
- }
-
- /* Check if I/O accesses and Bus Mastering are enabled */
- pci_read_config_word(pdev, PCI_COMMAND, &status);
-#ifdef __powerpc__
- if (!(status & PCI_COMMAND_IO)) {
- status |= PCI_COMMAND_IO;
- pci_write_config_word(pdev, PCI_COMMAND, status);
- pci_read_config_word(pdev, PCI_COMMAND, &status);
- }
-#endif /* __powerpc__ */
- if (!(status & PCI_COMMAND_IO)) {
- error = -ENODEV;
- goto free_dev;
- }
-
- if (!(status & PCI_COMMAND_MASTER)) {
- status |= PCI_COMMAND_MASTER;
- pci_write_config_word(pdev, PCI_COMMAND, status);
- pci_read_config_word(pdev, PCI_COMMAND, &status);
- }
- if (!(status & PCI_COMMAND_MASTER)) {
- error = -ENODEV;
- goto free_dev;
- }
-
- /* Check the latency timer for values >= 0x60 */
- pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &timer);
- if (timer < 0x60) {
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x60);
- }
-
- DevicePresent(dev, DE4X5_APROM);
-
- if (!request_region (iobase, DE4X5_PCI_TOTAL_SIZE, "de4x5")) {
- error = -EBUSY;
- goto free_dev;
- }
-
- dev->irq = irq;
-
- if ((error = de4x5_hw_init(dev, iobase, &pdev->dev))) {
- goto release;
- }
-
- return 0;
-
- release:
- release_region (iobase, DE4X5_PCI_TOTAL_SIZE);
- free_dev:
- free_netdev (dev);
- disable_dev:
- pci_disable_device (pdev);
- return error;
-}
-
-static void de4x5_pci_remove(struct pci_dev *pdev)
-{
- struct net_device *dev;
- u_long iobase;
-
- dev = pci_get_drvdata(pdev);
- iobase = dev->base_addr;
-
- unregister_netdev (dev);
- free_netdev (dev);
- release_region (iobase, DE4X5_PCI_TOTAL_SIZE);
- pci_disable_device (pdev);
-}
-
-static const struct pci_device_id de4x5_pci_tbl[] = {
- { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
- { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
- { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
- { },
-};
-
-static struct pci_driver de4x5_pci_driver = {
- .name = "de4x5",
- .id_table = de4x5_pci_tbl,
- .probe = de4x5_pci_probe,
- .remove = de4x5_pci_remove,
-};
-
-#endif
-
-/*
-** Auto configure the media here rather than setting the port at compile
-** time. This routine is called by de4x5_init() and when a loss of media is
-** detected (excessive collisions, loss of carrier, no carrier or link fail
-** [TP] or no recent receive activity) to check whether the user has been
-** sneaky and changed the port on us.
-*/
-static int
-autoconf_media(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- disable_ast(dev);
-
- lp->c_media = AUTO; /* Bogus last media */
- inl(DE4X5_MFC); /* Zero the lost frames counter */
- lp->media = INIT;
- lp->tcount = 0;
-
- de4x5_ast(&lp->timer);
-
- return lp->media;
-}
-
-/*
-** Autoconfigure the media when using the DC21040. AUI cannot be distinguished
-** from BNC as the port has a jumper to set thick or thin wire. When set for
-** BNC, the BNC port will indicate activity if it's not terminated correctly.
-** The only way to test for that is to place a loopback packet onto the
-** network and watch for errors. Since we're messing with the interrupt mask
-** register, disable the board interrupts and do not allow any more packets to
-** be queued to the hardware. Re-enable everything only when the media is
-** found.
-** I may have to "age out" locally queued packets so that the higher layer
-** timeouts don't effectively duplicate packets on the network.
-*/
-static int
-dc21040_autoconf(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int next_tick = DE4X5_AUTOSENSE_MS;
- s32 imr;
-
- switch (lp->media) {
- case INIT:
- DISABLE_IRQs;
- lp->tx_enable = false;
- lp->timeout = -1;
- de4x5_save_skbs(dev);
- if ((lp->autosense == AUTO) || (lp->autosense == TP)) {
- lp->media = TP;
- } else if ((lp->autosense == BNC) || (lp->autosense == AUI) || (lp->autosense == BNC_AUI)) {
- lp->media = BNC_AUI;
- } else if (lp->autosense == EXT_SIA) {
- lp->media = EXT_SIA;
- } else {
- lp->media = NC;
- }
- lp->local_state = 0;
- next_tick = dc21040_autoconf(dev);
- break;
-
- case TP:
- next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI,
- TP_SUSPECT, test_tp);
- break;
-
- case TP_SUSPECT:
- next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21040_autoconf);
- break;
-
- case BNC:
- case AUI:
- case BNC_AUI:
- next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA,
- BNC_AUI_SUSPECT, ping_media);
- break;
-
- case BNC_AUI_SUSPECT:
- next_tick = de4x5_suspect_state(dev, 1000, BNC_AUI, ping_media, dc21040_autoconf);
- break;
-
- case EXT_SIA:
- next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000,
- NC, EXT_SIA_SUSPECT, ping_media);
- break;
-
- case EXT_SIA_SUSPECT:
- next_tick = de4x5_suspect_state(dev, 1000, EXT_SIA, ping_media, dc21040_autoconf);
- break;
-
- case NC:
- /* default to TP for all */
- reset_init_sia(dev, 0x8f01, 0xffff, 0x0000);
- if (lp->media != lp->c_media) {
- de4x5_dbg_media(dev);
- lp->c_media = lp->media;
- }
- lp->media = INIT;
- lp->tx_enable = false;
- break;
- }
-
- return next_tick;
-}
-
-static int
-dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout,
- int next_state, int suspect_state,
- int (*fn)(struct net_device *, int))
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int next_tick = DE4X5_AUTOSENSE_MS;
- int linkBad;
-
- switch (lp->local_state) {
- case 0:
- reset_init_sia(dev, csr13, csr14, csr15);
- lp->local_state++;
- next_tick = 500;
- break;
-
- case 1:
- if (!lp->tx_enable) {
- linkBad = fn(dev, timeout);
- if (linkBad < 0) {
- next_tick = linkBad & ~TIMER_CB;
- } else {
- if (linkBad && (lp->autosense == AUTO)) {
- lp->local_state = 0;
- lp->media = next_state;
- } else {
- de4x5_init_connection(dev);
- }
- }
- } else if (!lp->linkOK && (lp->autosense == AUTO)) {
- lp->media = suspect_state;
- next_tick = 3000;
- }
- break;
- }
-
- return next_tick;
-}
-
-static int
-de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state,
- int (*fn)(struct net_device *, int),
- int (*asfn)(struct net_device *))
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int next_tick = DE4X5_AUTOSENSE_MS;
- int linkBad;
-
- switch (lp->local_state) {
- case 1:
- if (lp->linkOK) {
- lp->media = prev_state;
- } else {
- lp->local_state++;
- next_tick = asfn(dev);
- }
- break;
-
- case 2:
- linkBad = fn(dev, timeout);
- if (linkBad < 0) {
- next_tick = linkBad & ~TIMER_CB;
- } else if (!linkBad) {
- lp->local_state--;
- lp->media = prev_state;
- } else {
- lp->media = INIT;
- lp->tcount++;
- }
- }
-
- return next_tick;
-}
-
-/*
-** Autoconfigure the media when using the DC21041. AUI needs to be tested
-** before BNC, because the BNC port will indicate activity if it's not
-** terminated correctly. The only way to test for that is to place a loopback
-** packet onto the network and watch for errors. Since we're messing with
-** the interrupt mask register, disable the board interrupts and do not allow
-** any more packets to be queued to the hardware. Re-enable everything only
-** when the media is found.
-*/
-static int
-dc21041_autoconf(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- s32 sts, irqs, irq_mask, imr, omr;
- int next_tick = DE4X5_AUTOSENSE_MS;
-
- switch (lp->media) {
- case INIT:
- DISABLE_IRQs;
- lp->tx_enable = false;
- lp->timeout = -1;
- de4x5_save_skbs(dev); /* Save non transmitted skb's */
- if ((lp->autosense == AUTO) || (lp->autosense == TP_NW)) {
- lp->media = TP; /* On chip auto negotiation is broken */
- } else if (lp->autosense == TP) {
- lp->media = TP;
- } else if (lp->autosense == BNC) {
- lp->media = BNC;
- } else if (lp->autosense == AUI) {
- lp->media = AUI;
- } else {
- lp->media = NC;
- }
- lp->local_state = 0;
- next_tick = dc21041_autoconf(dev);
- break;
-
- case TP_NW:
- if (lp->timeout < 0) {
- omr = inl(DE4X5_OMR);/* Set up full duplex for the autonegotiate */
- outl(omr | OMR_FDX, DE4X5_OMR);
- }
- irqs = STS_LNF | STS_LNP;
- irq_mask = IMR_LFM | IMR_LPM;
- sts = test_media(dev, irqs, irq_mask, 0xef01, 0xffff, 0x0008, 2400);
- if (sts < 0) {
- next_tick = sts & ~TIMER_CB;
- } else {
- if (sts & STS_LNP) {
- lp->media = ANS;
- } else {
- lp->media = AUI;
- }
- next_tick = dc21041_autoconf(dev);
- }
- break;
-
- case ANS:
- if (!lp->tx_enable) {
- irqs = STS_LNP;
- irq_mask = IMR_LPM;
- sts = test_ans(dev, irqs, irq_mask, 3000);
- if (sts < 0) {
- next_tick = sts & ~TIMER_CB;
- } else {
- if (!(sts & STS_LNP) && (lp->autosense == AUTO)) {
- lp->media = TP;
- next_tick = dc21041_autoconf(dev);
- } else {
- lp->local_state = 1;
- de4x5_init_connection(dev);
- }
- }
- } else if (!lp->linkOK && (lp->autosense == AUTO)) {
- lp->media = ANS_SUSPECT;
- next_tick = 3000;
- }
- break;
-
- case ANS_SUSPECT:
- next_tick = de4x5_suspect_state(dev, 1000, ANS, test_tp, dc21041_autoconf);
- break;
-
- case TP:
- if (!lp->tx_enable) {
- if (lp->timeout < 0) {
- omr = inl(DE4X5_OMR); /* Set up half duplex for TP */
- outl(omr & ~OMR_FDX, DE4X5_OMR);
- }
- irqs = STS_LNF | STS_LNP;
- irq_mask = IMR_LFM | IMR_LPM;
- sts = test_media(dev,irqs, irq_mask, 0xef01, 0xff3f, 0x0008, 2400);
- if (sts < 0) {
- next_tick = sts & ~TIMER_CB;
- } else {
- if (!(sts & STS_LNP) && (lp->autosense == AUTO)) {
- if (inl(DE4X5_SISR) & SISR_NRA) {
- lp->media = AUI; /* Non selected port activity */
- } else {
- lp->media = BNC;
- }
- next_tick = dc21041_autoconf(dev);
- } else {
- lp->local_state = 1;
- de4x5_init_connection(dev);
- }
- }
- } else if (!lp->linkOK && (lp->autosense == AUTO)) {
- lp->media = TP_SUSPECT;
- next_tick = 3000;
- }
- break;
-
- case TP_SUSPECT:
- next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21041_autoconf);
- break;
-
- case AUI:
- if (!lp->tx_enable) {
- if (lp->timeout < 0) {
- omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */
- outl(omr & ~OMR_FDX, DE4X5_OMR);
- }
- irqs = 0;
- irq_mask = 0;
- sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x000e, 1000);
- if (sts < 0) {
- next_tick = sts & ~TIMER_CB;
- } else {
- if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) {
- lp->media = BNC;
- next_tick = dc21041_autoconf(dev);
- } else {
- lp->local_state = 1;
- de4x5_init_connection(dev);
- }
- }
- } else if (!lp->linkOK && (lp->autosense == AUTO)) {
- lp->media = AUI_SUSPECT;
- next_tick = 3000;
- }
- break;
-
- case AUI_SUSPECT:
- next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc21041_autoconf);
- break;
-
- case BNC:
- switch (lp->local_state) {
- case 0:
- if (lp->timeout < 0) {
- omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */
- outl(omr & ~OMR_FDX, DE4X5_OMR);
- }
- irqs = 0;
- irq_mask = 0;
- sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x0006, 1000);
- if (sts < 0) {
- next_tick = sts & ~TIMER_CB;
- } else {
- lp->local_state++; /* Ensure media connected */
- next_tick = dc21041_autoconf(dev);
- }
- break;
-
- case 1:
- if (!lp->tx_enable) {
- if ((sts = ping_media(dev, 3000)) < 0) {
- next_tick = sts & ~TIMER_CB;
- } else {
- if (sts) {
- lp->local_state = 0;
- lp->media = NC;
- } else {
- de4x5_init_connection(dev);
- }
- }
- } else if (!lp->linkOK && (lp->autosense == AUTO)) {
- lp->media = BNC_SUSPECT;
- next_tick = 3000;
- }
- break;
- }
- break;
-
- case BNC_SUSPECT:
- next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc21041_autoconf);
- break;
-
- case NC:
- omr = inl(DE4X5_OMR); /* Set up full duplex for the autonegotiate */
- outl(omr | OMR_FDX, DE4X5_OMR);
- reset_init_sia(dev, 0xef01, 0xffff, 0x0008);/* Initialise the SIA */
- if (lp->media != lp->c_media) {
- de4x5_dbg_media(dev);
- lp->c_media = lp->media;
- }
- lp->media = INIT;
- lp->tx_enable = false;
- break;
- }
-
- return next_tick;
-}
-
-/*
-** Some autonegotiation chips are broken in that they do not return the
-** acknowledge bit (anlpa & MII_ANLPA_ACK) in the link partner advertisement
-** register, except at the first power up negotiation.
-*/
-static int
-dc21140m_autoconf(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int ana, anlpa, cap, cr, slnk, sr;
- int next_tick = DE4X5_AUTOSENSE_MS;
- u_long imr, omr, iobase = dev->base_addr;
-
- switch(lp->media) {
- case INIT:
- if (lp->timeout < 0) {
- DISABLE_IRQs;
- lp->tx_enable = false;
- lp->linkOK = 0;
- de4x5_save_skbs(dev); /* Save non transmitted skb's */
- }
- if ((next_tick = de4x5_reset_phy(dev)) < 0) {
- next_tick &= ~TIMER_CB;
- } else {
- if (lp->useSROM) {
- if (srom_map_media(dev) < 0) {
- lp->tcount++;
- return next_tick;
- }
- srom_exec(dev, lp->phy[lp->active].gep);
- if (lp->infoblock_media == ANS) {
- ana = lp->phy[lp->active].ana | MII_ANA_CSMA;
- mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
- }
- } else {
- lp->tmp = MII_SR_ASSC; /* Fake out the MII speed set */
- SET_10Mb;
- if (lp->autosense == _100Mb) {
- lp->media = _100Mb;
- } else if (lp->autosense == _10Mb) {
- lp->media = _10Mb;
- } else if ((lp->autosense == AUTO) &&
- ((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
- ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
- ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
- mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
- lp->media = ANS;
- } else if (lp->autosense == AUTO) {
- lp->media = SPD_DET;
- } else if (is_spd_100(dev) && is_100_up(dev)) {
- lp->media = _100Mb;
- } else {
- lp->media = NC;
- }
- }
- lp->local_state = 0;
- next_tick = dc21140m_autoconf(dev);
- }
- break;
-
- case ANS:
- switch (lp->local_state) {
- case 0:
- if (lp->timeout < 0) {
- mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
- }
- cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
- if (cr < 0) {
- next_tick = cr & ~TIMER_CB;
- } else {
- if (cr) {
- lp->local_state = 0;
- lp->media = SPD_DET;
- } else {
- lp->local_state++;
- }
- next_tick = dc21140m_autoconf(dev);
- }
- break;
-
- case 1:
- if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000)) < 0) {
- next_tick = sr & ~TIMER_CB;
- } else {
- lp->media = SPD_DET;
- lp->local_state = 0;
- if (sr) { /* Success! */
- lp->tmp = MII_SR_ASSC;
- anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
- ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
- if (!(anlpa & MII_ANLPA_RF) &&
- (cap = anlpa & MII_ANLPA_TAF & ana)) {
- if (cap & MII_ANA_100M) {
- lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
- lp->media = _100Mb;
- } else if (cap & MII_ANA_10M) {
- lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
-
- lp->media = _10Mb;
- }
- }
- } /* Auto Negotiation failed to finish */
- next_tick = dc21140m_autoconf(dev);
- } /* Auto Negotiation failed to start */
- break;
- }
- break;
-
- case SPD_DET: /* Choose 10Mb/s or 100Mb/s */
- if (lp->timeout < 0) {
- lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS :
- (~gep_rd(dev) & GEP_LNP));
- SET_100Mb_PDET;
- }
- if ((slnk = test_for_100Mb(dev, 6500)) < 0) {
- next_tick = slnk & ~TIMER_CB;
- } else {
- if (is_spd_100(dev) && is_100_up(dev)) {
- lp->media = _100Mb;
- } else if ((!is_spd_100(dev) && (is_10_up(dev) & lp->tmp))) {
- lp->media = _10Mb;
- } else {
- lp->media = NC;
- }
- next_tick = dc21140m_autoconf(dev);
- }
- break;
-
- case _100Mb: /* Set 100Mb/s */
- next_tick = 3000;
- if (!lp->tx_enable) {
- SET_100Mb;
- de4x5_init_connection(dev);
- } else {
- if (!lp->linkOK && (lp->autosense == AUTO)) {
- if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) {
- lp->media = INIT;
- lp->tcount++;
- next_tick = DE4X5_AUTOSENSE_MS;
- }
- }
- }
- break;
-
- case BNC:
- case AUI:
- case _10Mb: /* Set 10Mb/s */
- next_tick = 3000;
- if (!lp->tx_enable) {
- SET_10Mb;
- de4x5_init_connection(dev);
- } else {
- if (!lp->linkOK && (lp->autosense == AUTO)) {
- if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) {
- lp->media = INIT;
- lp->tcount++;
- next_tick = DE4X5_AUTOSENSE_MS;
- }
- }
- }
- break;
-
- case NC:
- if (lp->media != lp->c_media) {
- de4x5_dbg_media(dev);
- lp->c_media = lp->media;
- }
- lp->media = INIT;
- lp->tx_enable = false;
- break;
- }
-
- return next_tick;
-}
-
-/*
-** This routine may be merged into dc21140m_autoconf() sometime as I'm
-** changing how I figure out the media - but trying to keep it backwards
-** compatible with the de500-xa and de500-aa.
-** Whether it's BNC, AUI, SYM or MII is sorted out in the infoblock
-** functions and set during de4x5_mac_port() and/or de4x5_reset_phy().
-** This routine just has to figure out whether 10Mb/s or 100Mb/s is
-** active.
-** When autonegotiation is working, the ANS part searches the SROM for
-** the highest common speed (TP) link that both can run and if that can
-** be full duplex. That infoblock is executed and then the link speed set.
-**
-** Only _10Mb and _100Mb are tested here.
-*/
-static int
-dc2114x_autoconf(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- s32 cr, anlpa, ana, cap, irqs, irq_mask, imr, omr, slnk, sr, sts;
- int next_tick = DE4X5_AUTOSENSE_MS;
-
- switch (lp->media) {
- case INIT:
- if (lp->timeout < 0) {
- DISABLE_IRQs;
- lp->tx_enable = false;
- lp->linkOK = 0;
- lp->timeout = -1;
- de4x5_save_skbs(dev); /* Save non transmitted skb's */
- if (lp->params.autosense & ~AUTO) {
- srom_map_media(dev); /* Fixed media requested */
- if (lp->media != lp->params.autosense) {
- lp->tcount++;
- lp->media = INIT;
- return next_tick;
- }
- lp->media = INIT;
- }
- }
- if ((next_tick = de4x5_reset_phy(dev)) < 0) {
- next_tick &= ~TIMER_CB;
- } else {
- if (lp->autosense == _100Mb) {
- lp->media = _100Mb;
- } else if (lp->autosense == _10Mb) {
- lp->media = _10Mb;
- } else if (lp->autosense == TP) {
- lp->media = TP;
- } else if (lp->autosense == BNC) {
- lp->media = BNC;
- } else if (lp->autosense == AUI) {
- lp->media = AUI;
- } else {
- lp->media = SPD_DET;
- if ((lp->infoblock_media == ANS) &&
- ((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
- ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
- ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
- mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
- lp->media = ANS;
- }
- }
- lp->local_state = 0;
- next_tick = dc2114x_autoconf(dev);
- }
- break;
-
- case ANS:
- switch (lp->local_state) {
- case 0:
- if (lp->timeout < 0) {
- mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
- }
- cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
- if (cr < 0) {
- next_tick = cr & ~TIMER_CB;
- } else {
- if (cr) {
- lp->local_state = 0;
- lp->media = SPD_DET;
- } else {
- lp->local_state++;
- }
- next_tick = dc2114x_autoconf(dev);
- }
- break;
-
- case 1:
- sr = test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000);
- if (sr < 0) {
- next_tick = sr & ~TIMER_CB;
- } else {
- lp->media = SPD_DET;
- lp->local_state = 0;
- if (sr) { /* Success! */
- lp->tmp = MII_SR_ASSC;
- anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
- ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
- if (!(anlpa & MII_ANLPA_RF) &&
- (cap = anlpa & MII_ANLPA_TAF & ana)) {
- if (cap & MII_ANA_100M) {
- lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
- lp->media = _100Mb;
- } else if (cap & MII_ANA_10M) {
- lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
- lp->media = _10Mb;
- }
- }
- } /* Auto Negotiation failed to finish */
- next_tick = dc2114x_autoconf(dev);
- } /* Auto Negotiation failed to start */
- break;
- }
- break;
-
- case AUI:
- if (!lp->tx_enable) {
- if (lp->timeout < 0) {
- omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */
- outl(omr & ~OMR_FDX, DE4X5_OMR);
- }
- irqs = 0;
- irq_mask = 0;
- sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000);
- if (sts < 0) {
- next_tick = sts & ~TIMER_CB;
- } else {
- if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) {
- lp->media = BNC;
- next_tick = dc2114x_autoconf(dev);
- } else {
- lp->local_state = 1;
- de4x5_init_connection(dev);
- }
- }
- } else if (!lp->linkOK && (lp->autosense == AUTO)) {
- lp->media = AUI_SUSPECT;
- next_tick = 3000;
- }
- break;
-
- case AUI_SUSPECT:
- next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc2114x_autoconf);
- break;
-
- case BNC:
- switch (lp->local_state) {
- case 0:
- if (lp->timeout < 0) {
- omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */
- outl(omr & ~OMR_FDX, DE4X5_OMR);
- }
- irqs = 0;
- irq_mask = 0;
- sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000);
- if (sts < 0) {
- next_tick = sts & ~TIMER_CB;
- } else {
- lp->local_state++; /* Ensure media connected */
- next_tick = dc2114x_autoconf(dev);
- }
- break;
-
- case 1:
- if (!lp->tx_enable) {
- if ((sts = ping_media(dev, 3000)) < 0) {
- next_tick = sts & ~TIMER_CB;
- } else {
- if (sts) {
- lp->local_state = 0;
- lp->tcount++;
- lp->media = INIT;
- } else {
- de4x5_init_connection(dev);
- }
- }
- } else if (!lp->linkOK && (lp->autosense == AUTO)) {
- lp->media = BNC_SUSPECT;
- next_tick = 3000;
- }
- break;
- }
- break;
-
- case BNC_SUSPECT:
- next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc2114x_autoconf);
- break;
-
- case SPD_DET: /* Choose 10Mb/s or 100Mb/s */
- if (srom_map_media(dev) < 0) {
- lp->tcount++;
- lp->media = INIT;
- return next_tick;
- }
- if (lp->media == _100Mb) {
- if ((slnk = test_for_100Mb(dev, 6500)) < 0) {
- lp->media = SPD_DET;
- return slnk & ~TIMER_CB;
- }
- } else {
- if (wait_for_link(dev) < 0) {
- lp->media = SPD_DET;
- return PDET_LINK_WAIT;
- }
- }
- if (lp->media == ANS) { /* Do MII parallel detection */
- if (is_spd_100(dev)) {
- lp->media = _100Mb;
- } else {
- lp->media = _10Mb;
- }
- next_tick = dc2114x_autoconf(dev);
- } else if (((lp->media == _100Mb) && is_100_up(dev)) ||
- (((lp->media == _10Mb) || (lp->media == TP) ||
- (lp->media == BNC) || (lp->media == AUI)) &&
- is_10_up(dev))) {
- next_tick = dc2114x_autoconf(dev);
- } else {
- lp->tcount++;
- lp->media = INIT;
- }
- break;
-
- case _10Mb:
- next_tick = 3000;
- if (!lp->tx_enable) {
- SET_10Mb;
- de4x5_init_connection(dev);
- } else {
- if (!lp->linkOK && (lp->autosense == AUTO)) {
- if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) {
- lp->media = INIT;
- lp->tcount++;
- next_tick = DE4X5_AUTOSENSE_MS;
- }
- }
- }
- break;
-
- case _100Mb:
- next_tick = 3000;
- if (!lp->tx_enable) {
- SET_100Mb;
- de4x5_init_connection(dev);
- } else {
- if (!lp->linkOK && (lp->autosense == AUTO)) {
- if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) {
- lp->media = INIT;
- lp->tcount++;
- next_tick = DE4X5_AUTOSENSE_MS;
- }
- }
- }
- break;
-
- default:
- lp->tcount++;
-printk("Huh?: media:%02x\n", lp->media);
- lp->media = INIT;
- break;
- }
-
- return next_tick;
-}
-
-static int
-srom_autoconf(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
-
- return lp->infoleaf_fn(dev);
-}
-
-/*
-** This mapping keeps the original media codes and FDX flag unchanged.
-** While it isn't strictly necessary, it helps me for the moment...
-** The early return avoids a media state / SROM media space clash.
-*/
-static int
-srom_map_media(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
-
- lp->fdx = false;
- if (lp->infoblock_media == lp->media)
- return 0;
-
- switch(lp->infoblock_media) {
- case SROM_10BASETF:
- if (!lp->params.fdx) return -1;
- lp->fdx = true;
- fallthrough;
-
- case SROM_10BASET:
- if (lp->params.fdx && !lp->fdx) return -1;
- if ((lp->chipset == DC21140) || ((lp->chipset & ~0x00ff) == DC2114x)) {
- lp->media = _10Mb;
- } else {
- lp->media = TP;
- }
- break;
-
- case SROM_10BASE2:
- lp->media = BNC;
- break;
-
- case SROM_10BASE5:
- lp->media = AUI;
- break;
-
- case SROM_100BASETF:
- if (!lp->params.fdx) return -1;
- lp->fdx = true;
- fallthrough;
-
- case SROM_100BASET:
- if (lp->params.fdx && !lp->fdx) return -1;
- lp->media = _100Mb;
- break;
-
- case SROM_100BASET4:
- lp->media = _100Mb;
- break;
-
- case SROM_100BASEFF:
- if (!lp->params.fdx) return -1;
- lp->fdx = true;
- fallthrough;
-
- case SROM_100BASEF:
- if (lp->params.fdx && !lp->fdx) return -1;
- lp->media = _100Mb;
- break;
-
- case ANS:
- lp->media = ANS;
- lp->fdx = lp->params.fdx;
- break;
-
- default:
- printk("%s: Bad media code [%d] detected in SROM!\n", dev->name,
- lp->infoblock_media);
- return -1;
- }
-
- return 0;
-}
-
-static void
-de4x5_init_connection(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- u_long flags = 0;
-
- if (lp->media != lp->c_media) {
- de4x5_dbg_media(dev);
- lp->c_media = lp->media; /* Stop scrolling media messages */
- }
-
- spin_lock_irqsave(&lp->lock, flags);
- de4x5_rst_desc_ring(dev);
- de4x5_setup_intr(dev);
- lp->tx_enable = true;
- spin_unlock_irqrestore(&lp->lock, flags);
- outl(POLL_DEMAND, DE4X5_TPD);
-
- netif_wake_queue(dev);
-}
-
-/*
-** General PHY reset function. Some MII devices don't reset correctly
-** since their MII address pins can float at voltages that are dependent
-** on the signal pin use. Do a double reset to ensure a reset.
-*/
-static int
-de4x5_reset_phy(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int next_tick = 0;
-
- if ((lp->useSROM) || (lp->phy[lp->active].id)) {
- if (lp->timeout < 0) {
- if (lp->useSROM) {
- if (lp->phy[lp->active].rst) {
- srom_exec(dev, lp->phy[lp->active].rst);
- srom_exec(dev, lp->phy[lp->active].rst);
- } else if (lp->rst) { /* Type 5 infoblock reset */
- srom_exec(dev, lp->rst);
- srom_exec(dev, lp->rst);
- }
- } else {
- PHY_HARD_RESET;
- }
- if (lp->useMII) {
- mii_wr(MII_CR_RST, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
- }
- }
- if (lp->useMII) {
- next_tick = test_mii_reg(dev, MII_CR, MII_CR_RST, false, 500);
- }
- } else if (lp->chipset == DC21140) {
- PHY_HARD_RESET;
- }
-
- return next_tick;
-}
-
-static int
-test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- s32 sts, csr12;
-
- if (lp->timeout < 0) {
- lp->timeout = msec/100;
- if (!lp->useSROM) { /* Already done if by SROM, else dc2104[01] */
- reset_init_sia(dev, csr13, csr14, csr15);
- }
-
- /* set up the interrupt mask */
- outl(irq_mask, DE4X5_IMR);
-
- /* clear all pending interrupts */
- sts = inl(DE4X5_STS);
- outl(sts, DE4X5_STS);
-
- /* clear csr12 NRA and SRA bits */
- if ((lp->chipset == DC21041) || lp->useSROM) {
- csr12 = inl(DE4X5_SISR);
- outl(csr12, DE4X5_SISR);
- }
- }
-
- sts = inl(DE4X5_STS) & ~TIMER_CB;
-
- if (!(sts & irqs) && --lp->timeout) {
- sts = 100 | TIMER_CB;
- } else {
- lp->timeout = -1;
- }
-
- return sts;
-}
-
-static int
-test_tp(struct net_device *dev, s32 msec)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int sisr;
-
- if (lp->timeout < 0) {
- lp->timeout = msec/100;
- }
-
- sisr = (inl(DE4X5_SISR) & ~TIMER_CB) & (SISR_LKF | SISR_NCR);
-
- if (sisr && --lp->timeout) {
- sisr = 100 | TIMER_CB;
- } else {
- lp->timeout = -1;
- }
-
- return sisr;
-}
-
-/*
-** Samples the 100Mb Link State Signal. The sample interval is important
-** because too fast a rate can give erroneous results and confuse the
-** speed sense algorithm.
-*/
-#define SAMPLE_INTERVAL 500 /* ms */
-#define SAMPLE_DELAY 2000 /* ms */
-static int
-test_for_100Mb(struct net_device *dev, int msec)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int gep = 0, ret = ((lp->chipset & ~0x00ff)==DC2114x? -1 :GEP_SLNK);
-
- if (lp->timeout < 0) {
- if ((msec/SAMPLE_INTERVAL) <= 0) return 0;
- if (msec > SAMPLE_DELAY) {
- lp->timeout = (msec - SAMPLE_DELAY)/SAMPLE_INTERVAL;
- gep = SAMPLE_DELAY | TIMER_CB;
- return gep;
- } else {
- lp->timeout = msec/SAMPLE_INTERVAL;
- }
- }
-
- if (lp->phy[lp->active].id || lp->useSROM) {
- gep = is_100_up(dev) | is_spd_100(dev);
- } else {
- gep = (~gep_rd(dev) & (GEP_SLNK | GEP_LNP));
- }
- if (!(gep & ret) && --lp->timeout) {
- gep = SAMPLE_INTERVAL | TIMER_CB;
- } else {
- lp->timeout = -1;
- }
-
- return gep;
-}
-
-static int
-wait_for_link(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
-
- if (lp->timeout < 0) {
- lp->timeout = 1;
- }
-
- if (lp->timeout--) {
- return TIMER_CB;
- } else {
- lp->timeout = -1;
- }
-
- return 0;
-}
-
-/*
-**
-**
-*/
-static int
-test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int test;
- u_long iobase = dev->base_addr;
-
- if (lp->timeout < 0) {
- lp->timeout = msec/100;
- }
-
- reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask;
- test = (reg ^ (pol ? ~0 : 0)) & mask;
-
- if (test && --lp->timeout) {
- reg = 100 | TIMER_CB;
- } else {
- lp->timeout = -1;
- }
-
- return reg;
-}
-
-static int
-is_spd_100(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int spd;
-
- if (lp->useMII) {
- spd = mii_rd(lp->phy[lp->active].spd.reg, lp->phy[lp->active].addr, DE4X5_MII);
- spd = ~(spd ^ lp->phy[lp->active].spd.value);
- spd &= lp->phy[lp->active].spd.mask;
- } else if (!lp->useSROM) { /* de500-xa */
- spd = ((~gep_rd(dev)) & GEP_SLNK);
- } else {
- if ((lp->ibn == 2) || !lp->asBitValid)
- return (lp->chipset == DC21143) ? (~inl(DE4X5_SISR)&SISR_LS100) : 0;
-
- spd = (lp->asBitValid & (lp->asPolarity ^ (gep_rd(dev) & lp->asBit))) |
- (lp->linkOK & ~lp->asBitValid);
- }
-
- return spd;
-}
-
-static int
-is_100_up(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- if (lp->useMII) {
- /* Double read for sticky bits & temporary drops */
- mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
- return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS;
- } else if (!lp->useSROM) { /* de500-xa */
- return (~gep_rd(dev)) & GEP_SLNK;
- } else {
- if ((lp->ibn == 2) || !lp->asBitValid)
- return (lp->chipset == DC21143) ? (~inl(DE4X5_SISR)&SISR_LS100) : 0;
-
- return (lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) |
- (lp->linkOK & ~lp->asBitValid);
- }
-}
-
-static int
-is_10_up(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- if (lp->useMII) {
- /* Double read for sticky bits & temporary drops */
- mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
- return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS;
- } else if (!lp->useSROM) { /* de500-xa */
- return (~gep_rd(dev)) & GEP_LNP;
- } else {
- if ((lp->ibn == 2) || !lp->asBitValid)
- return ((lp->chipset & ~0x00ff) == DC2114x) ?
- (~inl(DE4X5_SISR)&SISR_LS10):
- 0;
-
- return (lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) |
- (lp->linkOK & ~lp->asBitValid);
- }
-}
-
-static int
-is_anc_capable(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
- return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
- } else if ((lp->chipset & ~0x00ff) == DC2114x) {
- return (inl(DE4X5_SISR) & SISR_LPN) >> 12;
- } else {
- return 0;
- }
-}
-
-/*
-** Send a packet onto the media and watch for send errors that indicate the
-** media is bad or unconnected.
-*/
-static int
-ping_media(struct net_device *dev, int msec)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int sisr;
-
- if (lp->timeout < 0) {
- lp->timeout = msec/100;
-
- lp->tmp = lp->tx_new; /* Remember the ring position */
- load_packet(dev, lp->frame, TD_LS | TD_FS | sizeof(lp->frame), (struct sk_buff *)1);
- lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
- outl(POLL_DEMAND, DE4X5_TPD);
- }
-
- sisr = inl(DE4X5_SISR);
-
- if ((!(sisr & SISR_NCR)) &&
- ((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) &&
- (--lp->timeout)) {
- sisr = 100 | TIMER_CB;
- } else {
- if ((!(sisr & SISR_NCR)) &&
- !(le32_to_cpu(lp->tx_ring[lp->tmp].status) & (T_OWN | TD_ES)) &&
- lp->timeout) {
- sisr = 0;
- } else {
- sisr = 1;
- }
- lp->timeout = -1;
- }
-
- return sisr;
-}
-
-/*
-** This function does 2 things: on Intels it kmalloc's another buffer to
-** replace the one about to be passed up. On Alpha's it kmallocs a buffer
-** into which the packet is copied.
-*/
-static struct sk_buff *
-de4x5_alloc_rx_buff(struct net_device *dev, int index, int len)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- struct sk_buff *p;
-
-#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
- struct sk_buff *ret;
- u_long i=0, tmp;
-
- p = netdev_alloc_skb(dev, IEEE802_3_SZ + DE4X5_ALIGN + 2);
- if (!p) return NULL;
-
- tmp = virt_to_bus(p->data);
- i = ((tmp + DE4X5_ALIGN) & ~DE4X5_ALIGN) - tmp;
- skb_reserve(p, i);
- lp->rx_ring[index].buf = cpu_to_le32(tmp + i);
-
- ret = lp->rx_skb[index];
- lp->rx_skb[index] = p;
-
- if ((u_long) ret > 1) {
- skb_put(ret, len);
- }
-
- return ret;
-
-#else
- if (lp->state != OPEN) return (struct sk_buff *)1; /* Fake out the open */
-
- p = netdev_alloc_skb(dev, len + 2);
- if (!p) return NULL;
-
- skb_reserve(p, 2); /* Align */
- if (index < lp->rx_old) { /* Wrapped buffer */
- short tlen = (lp->rxRingSize - lp->rx_old) * RX_BUFF_SZ;
- skb_put_data(p, lp->rx_bufs + lp->rx_old * RX_BUFF_SZ, tlen);
- skb_put_data(p, lp->rx_bufs, len - tlen);
- } else { /* Linear buffer */
- skb_put_data(p, lp->rx_bufs + lp->rx_old * RX_BUFF_SZ, len);
- }
-
- return p;
-#endif
-}
-
-static void
-de4x5_free_rx_buffs(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int i;
-
- for (i=0; i<lp->rxRingSize; i++) {
- if ((u_long) lp->rx_skb[i] > 1) {
- dev_kfree_skb(lp->rx_skb[i]);
- }
- lp->rx_ring[i].status = 0;
- lp->rx_skb[i] = (struct sk_buff *)1; /* Dummy entry */
- }
-}
-
-static void
-de4x5_free_tx_buffs(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int i;
-
- for (i=0; i<lp->txRingSize; i++) {
- if (lp->tx_skb[i])
- de4x5_free_tx_buff(lp, i);
- lp->tx_ring[i].status = 0;
- }
-
- /* Unload the locally queued packets */
- __skb_queue_purge(&lp->cache.queue);
-}
-
-/*
-** When a user pulls a connection, the DECchip can end up in a
-** 'running - waiting for end of transmission' state. This means that we
-** have to perform a chip soft reset to ensure that we can synchronize
-** the hardware and software and make any media probes using a loopback
-** packet meaningful.
-*/
-static void
-de4x5_save_skbs(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- s32 omr;
-
- if (!lp->cache.save_cnt) {
- STOP_DE4X5;
- de4x5_tx(dev); /* Flush any sent skb's */
- de4x5_free_tx_buffs(dev);
- de4x5_cache_state(dev, DE4X5_SAVE_STATE);
- de4x5_sw_reset(dev);
- de4x5_cache_state(dev, DE4X5_RESTORE_STATE);
- lp->cache.save_cnt++;
- START_DE4X5;
- }
-}
-
-static void
-de4x5_rst_desc_ring(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int i;
- s32 omr;
-
- if (lp->cache.save_cnt) {
- STOP_DE4X5;
- outl(lp->dma_rings, DE4X5_RRBA);
- outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
- DE4X5_TRBA);
-
- lp->rx_new = lp->rx_old = 0;
- lp->tx_new = lp->tx_old = 0;
-
- for (i = 0; i < lp->rxRingSize; i++) {
- lp->rx_ring[i].status = cpu_to_le32(R_OWN);
- }
-
- for (i = 0; i < lp->txRingSize; i++) {
- lp->tx_ring[i].status = cpu_to_le32(0);
- }
-
- barrier();
- lp->cache.save_cnt--;
- START_DE4X5;
- }
-}
-
-static void
-de4x5_cache_state(struct net_device *dev, int flag)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- switch(flag) {
- case DE4X5_SAVE_STATE:
- lp->cache.csr0 = inl(DE4X5_BMR);
- lp->cache.csr6 = (inl(DE4X5_OMR) & ~(OMR_ST | OMR_SR));
- lp->cache.csr7 = inl(DE4X5_IMR);
- break;
-
- case DE4X5_RESTORE_STATE:
- outl(lp->cache.csr0, DE4X5_BMR);
- outl(lp->cache.csr6, DE4X5_OMR);
- outl(lp->cache.csr7, DE4X5_IMR);
- if (lp->chipset == DC21140) {
- gep_wr(lp->cache.gepc, dev);
- gep_wr(lp->cache.gep, dev);
- } else {
- reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14,
- lp->cache.csr15);
- }
- break;
- }
-}
-
-static void
-de4x5_put_cache(struct net_device *dev, struct sk_buff *skb)
-{
- struct de4x5_private *lp = netdev_priv(dev);
-
- __skb_queue_tail(&lp->cache.queue, skb);
-}
-
-static void
-de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb)
-{
- struct de4x5_private *lp = netdev_priv(dev);
-
- __skb_queue_head(&lp->cache.queue, skb);
-}
-
-static struct sk_buff *
-de4x5_get_cache(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
-
- return __skb_dequeue(&lp->cache.queue);
-}
-
-/*
-** Check the Auto Negotiation State. Return OK when a link pass interrupt
-** is received and the auto-negotiation status is NWAY OK.
-*/
-static int
-test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- s32 sts, ans;
-
- if (lp->timeout < 0) {
- lp->timeout = msec/100;
- outl(irq_mask, DE4X5_IMR);
-
- /* clear all pending interrupts */
- sts = inl(DE4X5_STS);
- outl(sts, DE4X5_STS);
- }
-
- ans = inl(DE4X5_SISR) & SISR_ANS;
- sts = inl(DE4X5_STS) & ~TIMER_CB;
-
- if (!(sts & irqs) && (ans ^ ANS_NWOK) && --lp->timeout) {
- sts = 100 | TIMER_CB;
- } else {
- lp->timeout = -1;
- }
-
- return sts;
-}
-
-static void
-de4x5_setup_intr(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- s32 imr, sts;
-
- if (inl(DE4X5_OMR) & OMR_SR) { /* Only unmask if TX/RX is enabled */
- imr = 0;
- UNMASK_IRQs;
- sts = inl(DE4X5_STS); /* Reset any pending (stale) interrupts */
- outl(sts, DE4X5_STS);
- ENABLE_IRQs;
- }
-}
-
-/*
-**
-*/
-static void
-reset_init_sia(struct net_device *dev, s32 csr13, s32 csr14, s32 csr15)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- RESET_SIA;
- if (lp->useSROM) {
- if (lp->ibn == 3) {
- srom_exec(dev, lp->phy[lp->active].rst);
- srom_exec(dev, lp->phy[lp->active].gep);
- outl(1, DE4X5_SICR);
- return;
- } else {
- csr15 = lp->cache.csr15;
- csr14 = lp->cache.csr14;
- csr13 = lp->cache.csr13;
- outl(csr15 | lp->cache.gepc, DE4X5_SIGR);
- outl(csr15 | lp->cache.gep, DE4X5_SIGR);
- }
- } else {
- outl(csr15, DE4X5_SIGR);
- }
- outl(csr14, DE4X5_STRR);
- outl(csr13, DE4X5_SICR);
-
- mdelay(10);
-}
-
-/*
-** Create a loopback ethernet packet
-*/
-static void
-create_packet(struct net_device *dev, char *frame, int len)
-{
- int i;
- char *buf = frame;
-
- for (i=0; i<ETH_ALEN; i++) { /* Use this source address */
- *buf++ = dev->dev_addr[i];
- }
- for (i=0; i<ETH_ALEN; i++) { /* Use this destination address */
- *buf++ = dev->dev_addr[i];
- }
-
- *buf++ = 0; /* Packet length (2 bytes) */
- *buf++ = 1;
-}
-
-/*
-** Look for a particular board name in the EISA configuration space
-*/
-static int
-EISA_signature(char *name, struct device *device)
-{
- int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures);
- struct eisa_device *edev;
-
- *name = '\0';
- edev = to_eisa_device (device);
- i = edev->id.driver_data;
-
- if (i >= 0 && i < siglen) {
- strcpy (name, de4x5_signatures[i]);
- status = 1;
- }
-
- return status; /* return the device name string */
-}
-
-/*
-** Look for a particular board name in the PCI configuration space
-*/
-static void
-PCI_signature(char *name, struct de4x5_private *lp)
-{
- int i, siglen = ARRAY_SIZE(de4x5_signatures);
-
- if (lp->chipset == DC21040) {
- strcpy(name, "DE434/5");
- return;
- } else { /* Search for a DEC name in the SROM */
- int tmp = *((char *)&lp->srom + 19) * 3;
- strncpy(name, (char *)&lp->srom + 26 + tmp, 8);
- }
- name[8] = '\0';
- for (i=0; i<siglen; i++) {
- if (strstr(name,de4x5_signatures[i])!=NULL) break;
- }
- if (i == siglen) {
- if (dec_only) {
- *name = '\0';
- } else { /* Use chip name to avoid confusion */
- strcpy(name, (((lp->chipset == DC21040) ? "DC21040" :
- ((lp->chipset == DC21041) ? "DC21041" :
- ((lp->chipset == DC21140) ? "DC21140" :
- ((lp->chipset == DC21142) ? "DC21142" :
- ((lp->chipset == DC21143) ? "DC21143" : "UNKNOWN"
- )))))));
- }
- if (lp->chipset != DC21041) {
- lp->useSROM = true; /* card is not recognisably DEC */
- }
- } else if ((lp->chipset & ~0x00ff) == DC2114x) {
- lp->useSROM = true;
- }
-}
-
-/*
-** Set up the Ethernet PROM counter to the start of the Ethernet address on
-** the DC21040, else read the SROM for the other chips.
-** The SROM may not be present in a multi-MAC card, so first read the
-** MAC address and check for a bad address. If there is a bad one then exit
-** immediately with the prior srom contents intact (the h/w address will
-** be fixed up later).
-*/
-static void
-DevicePresent(struct net_device *dev, u_long aprom_addr)
-{
- int i, j=0;
- struct de4x5_private *lp = netdev_priv(dev);
-
- if (lp->chipset == DC21040) {
- if (lp->bus == EISA) {
- enet_addr_rst(aprom_addr); /* Reset Ethernet Address ROM Pointer */
- } else {
- outl(0, aprom_addr); /* Reset Ethernet Address ROM Pointer */
- }
- } else { /* Read new srom */
- u_short tmp;
- __le16 *p = (__le16 *)((char *)&lp->srom + SROM_HWADD);
- for (i=0; i<(ETH_ALEN>>1); i++) {
- tmp = srom_rd(aprom_addr, (SROM_HWADD>>1) + i);
- j += tmp; /* for check for 0:0:0:0:0:0 or ff:ff:ff:ff:ff:ff */
- *p = cpu_to_le16(tmp);
- }
- if (j == 0 || j == 3 * 0xffff) {
- /* could get 0 only from all-0 and 3 * 0xffff only from all-1 */
- return;
- }
-
- p = (__le16 *)&lp->srom;
- for (i=0; i<(sizeof(struct de4x5_srom)>>1); i++) {
- tmp = srom_rd(aprom_addr, i);
- *p++ = cpu_to_le16(tmp);
- }
- de4x5_dbg_srom(&lp->srom);
- }
-}
-
-/*
-** Since the write on the Enet PROM register doesn't seem to reset the PROM
-** pointer correctly (at least on my DE425 EISA card), this routine should do
-** it...from depca.c.
-*/
-static void
-enet_addr_rst(u_long aprom_addr)
-{
- union {
- struct {
- u32 a;
- u32 b;
- } llsig;
- char Sig[sizeof(u32) << 1];
- } dev;
- short sigLength=0;
- s8 data;
- int i, j;
-
- dev.llsig.a = ETH_PROM_SIG;
- dev.llsig.b = ETH_PROM_SIG;
- sigLength = sizeof(u32) << 1;
-
- for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) {
- data = inb(aprom_addr);
- if (dev.Sig[j] == data) { /* track signature */
- j++;
- } else { /* lost signature; begin search again */
- if (data == dev.Sig[0]) { /* rare case.... */
- j=1;
- } else {
- j=0;
- }
- }
- }
-}
-
-/*
-** For the bad status case and no SROM, then add one to the previous
-** address. However, need to add one backwards in case we have 0xff
-** as one or more of the bytes. Only the last 3 bytes should be checked
-** as the first three are invariant - assigned to an organisation.
-*/
-static int
-get_hw_addr(struct net_device *dev)
-{
- u_long iobase = dev->base_addr;
- int broken, i, k, tmp, status = 0;
- u_short j,chksum;
- struct de4x5_private *lp = netdev_priv(dev);
- u8 addr[ETH_ALEN];
-
- broken = de4x5_bad_srom(lp);
-
- for (i=0,k=0,j=0;j<3;j++) {
- k <<= 1;
- if (k > 0xffff) k-=0xffff;
-
- if (lp->bus == PCI) {
- if (lp->chipset == DC21040) {
- while ((tmp = inl(DE4X5_APROM)) < 0);
- k += (u_char) tmp;
- addr[i++] = (u_char) tmp;
- while ((tmp = inl(DE4X5_APROM)) < 0);
- k += (u_short) (tmp << 8);
- addr[i++] = (u_char) tmp;
- } else if (!broken) {
- addr[i] = (u_char) lp->srom.ieee_addr[i]; i++;
- addr[i] = (u_char) lp->srom.ieee_addr[i]; i++;
- } else if ((broken == SMC) || (broken == ACCTON)) {
- addr[i] = *((u_char *)&lp->srom + i); i++;
- addr[i] = *((u_char *)&lp->srom + i); i++;
- }
- } else {
- k += (u_char) (tmp = inb(EISA_APROM));
- addr[i++] = (u_char) tmp;
- k += (u_short) ((tmp = inb(EISA_APROM)) << 8);
- addr[i++] = (u_char) tmp;
- }
-
- if (k > 0xffff) k-=0xffff;
- }
- if (k == 0xffff) k=0;
-
- eth_hw_addr_set(dev, addr);
-
- if (lp->bus == PCI) {
- if (lp->chipset == DC21040) {
- while ((tmp = inl(DE4X5_APROM)) < 0);
- chksum = (u_char) tmp;
- while ((tmp = inl(DE4X5_APROM)) < 0);
- chksum |= (u_short) (tmp << 8);
- if ((k != chksum) && (dec_only)) status = -1;
- }
- } else {
- chksum = (u_char) inb(EISA_APROM);
- chksum |= (u_short) (inb(EISA_APROM) << 8);
- if ((k != chksum) && (dec_only)) status = -1;
- }
-
- /* If possible, try to fix a broken card - SMC only so far */
- srom_repair(dev, broken);
-
-#ifdef CONFIG_PPC_PMAC
- /*
- ** If the address starts with 00 a0, we have to bit-reverse
- ** each byte of the address.
- */
- if ( machine_is(powermac) &&
- (dev->dev_addr[0] == 0) &&
- (dev->dev_addr[1] == 0xa0) )
- {
- for (i = 0; i < ETH_ALEN; ++i)
- {
- int x = dev->dev_addr[i];
- x = ((x & 0xf) << 4) + ((x & 0xf0) >> 4);
- x = ((x & 0x33) << 2) + ((x & 0xcc) >> 2);
- addr[i] = ((x & 0x55) << 1) + ((x & 0xaa) >> 1);
- }
- eth_hw_addr_set(dev, addr);
- }
-#endif /* CONFIG_PPC_PMAC */
-
- /* Test for a bad enet address */
- status = test_bad_enet(dev, status);
-
- return status;
-}
-
-/*
-** Test for enet addresses in the first 32 bytes.
-*/
-static int
-de4x5_bad_srom(struct de4x5_private *lp)
-{
- int i, status = 0;
-
- for (i = 0; i < ARRAY_SIZE(enet_det); i++) {
- if (!memcmp(&lp->srom, &enet_det[i], 3) &&
- !memcmp((char *)&lp->srom+0x10, &enet_det[i], 3)) {
- if (i == 0) {
- status = SMC;
- } else if (i == 1) {
- status = ACCTON;
- }
- break;
- }
- }
-
- return status;
-}
-
-static void
-srom_repair(struct net_device *dev, int card)
-{
- struct de4x5_private *lp = netdev_priv(dev);
-
- switch(card) {
- case SMC:
- memset((char *)&lp->srom, 0, sizeof(struct de4x5_srom));
- memcpy(lp->srom.ieee_addr, (char *)dev->dev_addr, ETH_ALEN);
- memcpy(lp->srom.info, (char *)&srom_repair_info[SMC-1], 100);
- lp->useSROM = true;
- break;
- }
-}
-
-/*
-** Assume that the irq's do not follow the PCI spec - this is seems
-** to be true so far (2 for 2).
-*/
-static int
-test_bad_enet(struct net_device *dev, int status)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int i, tmp;
-
- for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i];
- if ((tmp == 0) || (tmp == 0x5fa)) {
- if ((lp->chipset == last.chipset) &&
- (lp->bus_num == last.bus) && (lp->bus_num > 0)) {
- eth_addr_inc(last.addr);
- eth_hw_addr_set(dev, last.addr);
-
- if (!an_exception(lp)) {
- dev->irq = last.irq;
- }
-
- status = 0;
- }
- } else if (!status) {
- last.chipset = lp->chipset;
- last.bus = lp->bus_num;
- last.irq = dev->irq;
- for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i];
- }
-
- return status;
-}
-
-/*
-** List of board exceptions with correctly wired IRQs
-*/
-static int
-an_exception(struct de4x5_private *lp)
-{
- if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) &&
- (*(u_short *)lp->srom.sub_system_id == 0x95e0)) {
- return -1;
- }
-
- return 0;
-}
-
-/*
-** SROM Read
-*/
-static short
-srom_rd(u_long addr, u_char offset)
-{
- sendto_srom(SROM_RD | SROM_SR, addr);
-
- srom_latch(SROM_RD | SROM_SR | DT_CS, addr);
- srom_command(SROM_RD | SROM_SR | DT_IN | DT_CS, addr);
- srom_address(SROM_RD | SROM_SR | DT_CS, addr, offset);
-
- return srom_data(SROM_RD | SROM_SR | DT_CS, addr);
-}
-
-static void
-srom_latch(u_int command, u_long addr)
-{
- sendto_srom(command, addr);
- sendto_srom(command | DT_CLK, addr);
- sendto_srom(command, addr);
-}
-
-static void
-srom_command(u_int command, u_long addr)
-{
- srom_latch(command, addr);
- srom_latch(command, addr);
- srom_latch((command & 0x0000ff00) | DT_CS, addr);
-}
-
-static void
-srom_address(u_int command, u_long addr, u_char offset)
-{
- int i, a;
-
- a = offset << 2;
- for (i=0; i<6; i++, a <<= 1) {
- srom_latch(command | ((a & 0x80) ? DT_IN : 0), addr);
- }
- udelay(1);
-
- i = (getfrom_srom(addr) >> 3) & 0x01;
-}
-
-static short
-srom_data(u_int command, u_long addr)
-{
- int i;
- short word = 0;
- s32 tmp;
-
- for (i=0; i<16; i++) {
- sendto_srom(command | DT_CLK, addr);
- tmp = getfrom_srom(addr);
- sendto_srom(command, addr);
-
- word = (word << 1) | ((tmp >> 3) & 0x01);
- }
-
- sendto_srom(command & 0x0000ff00, addr);
-
- return word;
-}
-
-/*
-static void
-srom_busy(u_int command, u_long addr)
-{
- sendto_srom((command & 0x0000ff00) | DT_CS, addr);
-
- while (!((getfrom_srom(addr) >> 3) & 0x01)) {
- mdelay(1);
- }
-
- sendto_srom(command & 0x0000ff00, addr);
-}
-*/
-
-static void
-sendto_srom(u_int command, u_long addr)
-{
- outl(command, addr);
- udelay(1);
-}
-
-static int
-getfrom_srom(u_long addr)
-{
- s32 tmp;
-
- tmp = inl(addr);
- udelay(1);
-
- return tmp;
-}
-
-static int
-srom_infoleaf_info(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int i, count;
- u_char *p;
-
- /* Find the infoleaf decoder function that matches this chipset */
- for (i=0; i<INFOLEAF_SIZE; i++) {
- if (lp->chipset == infoleaf_array[i].chipset) break;
- }
- if (i == INFOLEAF_SIZE) {
- lp->useSROM = false;
- printk("%s: Cannot find correct chipset for SROM decoding!\n",
- dev->name);
- return -ENXIO;
- }
-
- lp->infoleaf_fn = infoleaf_array[i].fn;
-
- /* Find the information offset that this function should use */
- count = *((u_char *)&lp->srom + 19);
- p = (u_char *)&lp->srom + 26;
-
- if (count > 1) {
- for (i=count; i; --i, p+=3) {
- if (lp->device == *p) break;
- }
- if (i == 0) {
- lp->useSROM = false;
- printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n",
- dev->name, lp->device);
- return -ENXIO;
- }
- }
-
- lp->infoleaf_offset = get_unaligned_le16(p + 1);
-
- return 0;
-}
-
-/*
-** This routine loads any type 1 or 3 MII info into the mii device
-** struct and executes any type 5 code to reset PHY devices for this
-** controller.
-** The info for the MII devices will be valid since the index used
-** will follow the discovery process from MII address 1-31 then 0.
-*/
-static void
-srom_init(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
- u_char count;
-
- p+=2;
- if (lp->chipset == DC21140) {
- lp->cache.gepc = (*p++ | GEP_CTRL);
- gep_wr(lp->cache.gepc, dev);
- }
-
- /* Block count */
- count = *p++;
-
- /* Jump the infoblocks to find types */
- for (;count; --count) {
- if (*p < 128) {
- p += COMPACT_LEN;
- } else if (*(p+1) == 5) {
- type5_infoblock(dev, 1, p);
- p += ((*p & BLOCK_LEN) + 1);
- } else if (*(p+1) == 4) {
- p += ((*p & BLOCK_LEN) + 1);
- } else if (*(p+1) == 3) {
- type3_infoblock(dev, 1, p);
- p += ((*p & BLOCK_LEN) + 1);
- } else if (*(p+1) == 2) {
- p += ((*p & BLOCK_LEN) + 1);
- } else if (*(p+1) == 1) {
- type1_infoblock(dev, 1, p);
- p += ((*p & BLOCK_LEN) + 1);
- } else {
- p += ((*p & BLOCK_LEN) + 1);
- }
- }
-}
-
-/*
-** A generic routine that writes GEP control, data and reset information
-** to the GEP register (21140) or csr15 GEP portion (2114[23]).
-*/
-static void
-srom_exec(struct net_device *dev, u_char *p)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- u_char count = (p ? *p++ : 0);
- u_short *w = (u_short *)p;
-
- if (((lp->ibn != 1) && (lp->ibn != 3) && (lp->ibn != 5)) || !count) return;
-
- if (lp->chipset != DC21140) RESET_SIA;
-
- while (count--) {
- gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ?
- *p++ : get_unaligned_le16(w++)), dev);
- mdelay(2); /* 2ms per action */
- }
-
- if (lp->chipset != DC21140) {
- outl(lp->cache.csr14, DE4X5_STRR);
- outl(lp->cache.csr13, DE4X5_SICR);
- }
-}
-
-/*
-** Basically this function is a NOP since it will never be called,
-** unless I implement the DC21041 SROM functions. There's no need
-** since the existing code will be satisfactory for all boards.
-*/
-static int
-dc21041_infoleaf(struct net_device *dev)
-{
- return DE4X5_AUTOSENSE_MS;
-}
-
-static int
-dc21140_infoleaf(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char count = 0;
- u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
- int next_tick = DE4X5_AUTOSENSE_MS;
-
- /* Read the connection type */
- p+=2;
-
- /* GEP control */
- lp->cache.gepc = (*p++ | GEP_CTRL);
-
- /* Block count */
- count = *p++;
-
- /* Recursively figure out the info blocks */
- if (*p < 128) {
- next_tick = dc_infoblock[COMPACT](dev, count, p);
- } else {
- next_tick = dc_infoblock[*(p+1)](dev, count, p);
- }
-
- if (lp->tcount == count) {
- lp->media = NC;
- if (lp->media != lp->c_media) {
- de4x5_dbg_media(dev);
- lp->c_media = lp->media;
- }
- lp->media = INIT;
- lp->tcount = 0;
- lp->tx_enable = false;
- }
-
- return next_tick & ~TIMER_CB;
-}
-
-static int
-dc21142_infoleaf(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char count = 0;
- u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
- int next_tick = DE4X5_AUTOSENSE_MS;
-
- /* Read the connection type */
- p+=2;
-
- /* Block count */
- count = *p++;
-
- /* Recursively figure out the info blocks */
- if (*p < 128) {
- next_tick = dc_infoblock[COMPACT](dev, count, p);
- } else {
- next_tick = dc_infoblock[*(p+1)](dev, count, p);
- }
-
- if (lp->tcount == count) {
- lp->media = NC;
- if (lp->media != lp->c_media) {
- de4x5_dbg_media(dev);
- lp->c_media = lp->media;
- }
- lp->media = INIT;
- lp->tcount = 0;
- lp->tx_enable = false;
- }
-
- return next_tick & ~TIMER_CB;
-}
-
-static int
-dc21143_infoleaf(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char count = 0;
- u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
- int next_tick = DE4X5_AUTOSENSE_MS;
-
- /* Read the connection type */
- p+=2;
-
- /* Block count */
- count = *p++;
-
- /* Recursively figure out the info blocks */
- if (*p < 128) {
- next_tick = dc_infoblock[COMPACT](dev, count, p);
- } else {
- next_tick = dc_infoblock[*(p+1)](dev, count, p);
- }
- if (lp->tcount == count) {
- lp->media = NC;
- if (lp->media != lp->c_media) {
- de4x5_dbg_media(dev);
- lp->c_media = lp->media;
- }
- lp->media = INIT;
- lp->tcount = 0;
- lp->tx_enable = false;
- }
-
- return next_tick & ~TIMER_CB;
-}
-
-/*
-** The compact infoblock is only designed for DC21140[A] chips, so
-** we'll reuse the dc21140m_autoconf function. Non MII media only.
-*/
-static int
-compact_infoblock(struct net_device *dev, u_char count, u_char *p)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char flags, csr6;
-
- /* Recursively figure out the info blocks */
- if (--count > lp->tcount) {
- if (*(p+COMPACT_LEN) < 128) {
- return dc_infoblock[COMPACT](dev, count, p+COMPACT_LEN);
- } else {
- return dc_infoblock[*(p+COMPACT_LEN+1)](dev, count, p+COMPACT_LEN);
- }
- }
-
- if ((lp->media == INIT) && (lp->timeout < 0)) {
- lp->ibn = COMPACT;
- lp->active = 0;
- gep_wr(lp->cache.gepc, dev);
- lp->infoblock_media = (*p++) & COMPACT_MC;
- lp->cache.gep = *p++;
- csr6 = *p++;
- flags = *p++;
-
- lp->asBitValid = (flags & 0x80) ? 0 : -1;
- lp->defMedium = (flags & 0x40) ? -1 : 0;
- lp->asBit = 1 << ((csr6 >> 1) & 0x07);
- lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
- lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
- lp->useMII = false;
-
- de4x5_switch_mac_port(dev);
- }
-
- return dc21140m_autoconf(dev);
-}
-
-/*
-** This block describes non MII media for the DC21140[A] only.
-*/
-static int
-type0_infoblock(struct net_device *dev, u_char count, u_char *p)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char flags, csr6, len = (*p & BLOCK_LEN)+1;
-
- /* Recursively figure out the info blocks */
- if (--count > lp->tcount) {
- if (*(p+len) < 128) {
- return dc_infoblock[COMPACT](dev, count, p+len);
- } else {
- return dc_infoblock[*(p+len+1)](dev, count, p+len);
- }
- }
-
- if ((lp->media == INIT) && (lp->timeout < 0)) {
- lp->ibn = 0;
- lp->active = 0;
- gep_wr(lp->cache.gepc, dev);
- p+=2;
- lp->infoblock_media = (*p++) & BLOCK0_MC;
- lp->cache.gep = *p++;
- csr6 = *p++;
- flags = *p++;
-
- lp->asBitValid = (flags & 0x80) ? 0 : -1;
- lp->defMedium = (flags & 0x40) ? -1 : 0;
- lp->asBit = 1 << ((csr6 >> 1) & 0x07);
- lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
- lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
- lp->useMII = false;
-
- de4x5_switch_mac_port(dev);
- }
-
- return dc21140m_autoconf(dev);
-}
-
-/* These functions are under construction! */
-
-static int
-type1_infoblock(struct net_device *dev, u_char count, u_char *p)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char len = (*p & BLOCK_LEN)+1;
-
- /* Recursively figure out the info blocks */
- if (--count > lp->tcount) {
- if (*(p+len) < 128) {
- return dc_infoblock[COMPACT](dev, count, p+len);
- } else {
- return dc_infoblock[*(p+len+1)](dev, count, p+len);
- }
- }
-
- p += 2;
- if (lp->state == INITIALISED) {
- lp->ibn = 1;
- lp->active = *p++;
- lp->phy[lp->active].gep = (*p ? p : NULL); p += (*p + 1);
- lp->phy[lp->active].rst = (*p ? p : NULL); p += (*p + 1);
- lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;
- lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
- lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
- lp->phy[lp->active].ttm = get_unaligned_le16(p);
- return 0;
- } else if ((lp->media == INIT) && (lp->timeout < 0)) {
- lp->ibn = 1;
- lp->active = *p;
- lp->infoblock_csr6 = OMR_MII_100;
- lp->useMII = true;
- lp->infoblock_media = ANS;
-
- de4x5_switch_mac_port(dev);
- }
-
- return dc21140m_autoconf(dev);
-}
-
-static int
-type2_infoblock(struct net_device *dev, u_char count, u_char *p)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char len = (*p & BLOCK_LEN)+1;
-
- /* Recursively figure out the info blocks */
- if (--count > lp->tcount) {
- if (*(p+len) < 128) {
- return dc_infoblock[COMPACT](dev, count, p+len);
- } else {
- return dc_infoblock[*(p+len+1)](dev, count, p+len);
- }
- }
-
- if ((lp->media == INIT) && (lp->timeout < 0)) {
- lp->ibn = 2;
- lp->active = 0;
- p += 2;
- lp->infoblock_media = (*p) & MEDIA_CODE;
-
- if ((*p++) & EXT_FIELD) {
- lp->cache.csr13 = get_unaligned_le16(p); p += 2;
- lp->cache.csr14 = get_unaligned_le16(p); p += 2;
- lp->cache.csr15 = get_unaligned_le16(p); p += 2;
- } else {
- lp->cache.csr13 = CSR13;
- lp->cache.csr14 = CSR14;
- lp->cache.csr15 = CSR15;
- }
- lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
- lp->cache.gep = ((s32)(get_unaligned_le16(p)) << 16);
- lp->infoblock_csr6 = OMR_SIA;
- lp->useMII = false;
-
- de4x5_switch_mac_port(dev);
- }
-
- return dc2114x_autoconf(dev);
-}
-
-static int
-type3_infoblock(struct net_device *dev, u_char count, u_char *p)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char len = (*p & BLOCK_LEN)+1;
-
- /* Recursively figure out the info blocks */
- if (--count > lp->tcount) {
- if (*(p+len) < 128) {
- return dc_infoblock[COMPACT](dev, count, p+len);
- } else {
- return dc_infoblock[*(p+len+1)](dev, count, p+len);
- }
- }
-
- p += 2;
- if (lp->state == INITIALISED) {
- lp->ibn = 3;
- lp->active = *p++;
- if (MOTO_SROM_BUG) lp->active = 0;
- /* if (MOTO_SROM_BUG) statement indicates lp->active could
- * be 8 (i.e. the size of array lp->phy) */
- if (WARN_ON(lp->active >= ARRAY_SIZE(lp->phy)))
- return -EINVAL;
- lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
- lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
- lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;
- lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
- lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
- lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
- lp->phy[lp->active].mci = *p;
- return 0;
- } else if ((lp->media == INIT) && (lp->timeout < 0)) {
- lp->ibn = 3;
- lp->active = *p;
- if (MOTO_SROM_BUG) lp->active = 0;
- lp->infoblock_csr6 = OMR_MII_100;
- lp->useMII = true;
- lp->infoblock_media = ANS;
-
- de4x5_switch_mac_port(dev);
- }
-
- return dc2114x_autoconf(dev);
-}
-
-static int
-type4_infoblock(struct net_device *dev, u_char count, u_char *p)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char flags, csr6, len = (*p & BLOCK_LEN)+1;
-
- /* Recursively figure out the info blocks */
- if (--count > lp->tcount) {
- if (*(p+len) < 128) {
- return dc_infoblock[COMPACT](dev, count, p+len);
- } else {
- return dc_infoblock[*(p+len+1)](dev, count, p+len);
- }
- }
-
- if ((lp->media == INIT) && (lp->timeout < 0)) {
- lp->ibn = 4;
- lp->active = 0;
- p+=2;
- lp->infoblock_media = (*p++) & MEDIA_CODE;
- lp->cache.csr13 = CSR13; /* Hard coded defaults */
- lp->cache.csr14 = CSR14;
- lp->cache.csr15 = CSR15;
- lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
- lp->cache.gep = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
- csr6 = *p++;
- flags = *p++;
-
- lp->asBitValid = (flags & 0x80) ? 0 : -1;
- lp->defMedium = (flags & 0x40) ? -1 : 0;
- lp->asBit = 1 << ((csr6 >> 1) & 0x07);
- lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
- lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
- lp->useMII = false;
-
- de4x5_switch_mac_port(dev);
- }
-
- return dc2114x_autoconf(dev);
-}
-
-/*
-** This block type provides information for resetting external devices
-** (chips) through the General Purpose Register.
-*/
-static int
-type5_infoblock(struct net_device *dev, u_char count, u_char *p)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_char len = (*p & BLOCK_LEN)+1;
-
- /* Recursively figure out the info blocks */
- if (--count > lp->tcount) {
- if (*(p+len) < 128) {
- return dc_infoblock[COMPACT](dev, count, p+len);
- } else {
- return dc_infoblock[*(p+len+1)](dev, count, p+len);
- }
- }
-
- /* Must be initializing to run this code */
- if ((lp->state == INITIALISED) || (lp->media == INIT)) {
- p+=2;
- lp->rst = p;
- srom_exec(dev, lp->rst);
- }
-
- return DE4X5_AUTOSENSE_MS;
-}
-
-/*
-** MII Read/Write
-*/
-
-static int
-mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr)
-{
- mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */
- mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */
- mii_wdata(MII_STRD, 4, ioaddr); /* SFD and Read operation */
- mii_address(phyaddr, ioaddr); /* PHY address to be accessed */
- mii_address(phyreg, ioaddr); /* PHY Register to read */
- mii_ta(MII_STRD, ioaddr); /* Turn around time - 2 MDC */
-
- return mii_rdata(ioaddr); /* Read data */
-}
-
-static void
-mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr)
-{
- mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */
- mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */
- mii_wdata(MII_STWR, 4, ioaddr); /* SFD and Write operation */
- mii_address(phyaddr, ioaddr); /* PHY address to be accessed */
- mii_address(phyreg, ioaddr); /* PHY Register to write */
- mii_ta(MII_STWR, ioaddr); /* Turn around time - 2 MDC */
- data = mii_swap(data, 16); /* Swap data bit ordering */
- mii_wdata(data, 16, ioaddr); /* Write data */
-}
-
-static int
-mii_rdata(u_long ioaddr)
-{
- int i;
- s32 tmp = 0;
-
- for (i=0; i<16; i++) {
- tmp <<= 1;
- tmp |= getfrom_mii(MII_MRD | MII_RD, ioaddr);
- }
-
- return tmp;
-}
-
-static void
-mii_wdata(int data, int len, u_long ioaddr)
-{
- int i;
-
- for (i=0; i<len; i++) {
- sendto_mii(MII_MWR | MII_WR, data, ioaddr);
- data >>= 1;
- }
-}
-
-static void
-mii_address(u_char addr, u_long ioaddr)
-{
- int i;
-
- addr = mii_swap(addr, 5);
- for (i=0; i<5; i++) {
- sendto_mii(MII_MWR | MII_WR, addr, ioaddr);
- addr >>= 1;
- }
-}
-
-static void
-mii_ta(u_long rw, u_long ioaddr)
-{
- if (rw == MII_STWR) {
- sendto_mii(MII_MWR | MII_WR, 1, ioaddr);
- sendto_mii(MII_MWR | MII_WR, 0, ioaddr);
- } else {
- getfrom_mii(MII_MRD | MII_RD, ioaddr); /* Tri-state MDIO */
- }
-}
-
-static int
-mii_swap(int data, int len)
-{
- int i, tmp = 0;
-
- for (i=0; i<len; i++) {
- tmp <<= 1;
- tmp |= (data & 1);
- data >>= 1;
- }
-
- return tmp;
-}
-
-static void
-sendto_mii(u32 command, int data, u_long ioaddr)
-{
- u32 j;
-
- j = (data & 1) << 17;
- outl(command | j, ioaddr);
- udelay(1);
- outl(command | MII_MDC | j, ioaddr);
- udelay(1);
-}
-
-static int
-getfrom_mii(u32 command, u_long ioaddr)
-{
- outl(command, ioaddr);
- udelay(1);
- outl(command | MII_MDC, ioaddr);
- udelay(1);
-
- return (inl(ioaddr) >> 19) & 1;
-}
-
-/*
-** Here's 3 ways to calculate the OUI from the ID registers.
-*/
-static int
-mii_get_oui(u_char phyaddr, u_long ioaddr)
-{
-/*
- union {
- u_short reg;
- u_char breg[2];
- } a;
- int i, r2, r3, ret=0;*/
- int r2;
-
- /* Read r2 and r3 */
- r2 = mii_rd(MII_ID0, phyaddr, ioaddr);
- mii_rd(MII_ID1, phyaddr, ioaddr);
- /* SEEQ and Cypress way * /
- / * Shuffle r2 and r3 * /
- a.reg=0;
- r3 = ((r3>>10)|(r2<<6))&0x0ff;
- r2 = ((r2>>2)&0x3fff);
-
- / * Bit reverse r3 * /
- for (i=0;i<8;i++) {
- ret<<=1;
- ret |= (r3&1);
- r3>>=1;
- }
-
- / * Bit reverse r2 * /
- for (i=0;i<16;i++) {
- a.reg<<=1;
- a.reg |= (r2&1);
- r2>>=1;
- }
-
- / * Swap r2 bytes * /
- i=a.breg[0];
- a.breg[0]=a.breg[1];
- a.breg[1]=i;
-
- return (a.reg<<8)|ret; */ /* SEEQ and Cypress way */
-/* return (r2<<6)|(u_int)(r3>>10); */ /* NATIONAL and BROADCOM way */
- return r2; /* (I did it) My way */
-}
-
-/*
-** The SROM spec forces us to search addresses [1-31 0]. Bummer.
-*/
-static int
-mii_get_phy(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- int i, j, k, n, limit=ARRAY_SIZE(phy_info);
- int id;
-
- lp->active = 0;
- lp->useMII = true;
-
- /* Search the MII address space for possible PHY devices */
- for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(i+1)%DE4X5_MAX_MII) {
- lp->phy[lp->active].addr = i;
- if (i==0) n++; /* Count cycles */
- while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */
- id = mii_get_oui(i, DE4X5_MII);
- if ((id == 0) || (id == 65535)) continue; /* Valid ID? */
- for (j=0; j<limit; j++) { /* Search PHY table */
- if (id != phy_info[j].id) continue; /* ID match? */
- for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
- if (k < DE4X5_MAX_PHY) {
- memcpy((char *)&lp->phy[k],
- (char *)&phy_info[j], sizeof(struct phy_table));
- lp->phy[k].addr = i;
- lp->mii_cnt++;
- lp->active++;
- } else {
- goto purgatory; /* Stop the search */
- }
- break;
- }
- if ((j == limit) && (i < DE4X5_MAX_MII)) {
- for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
- if (k < DE4X5_MAX_PHY) {
- lp->phy[k].addr = i;
- lp->phy[k].id = id;
- lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */
- lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */
- lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */
- lp->mii_cnt++;
- lp->active++;
- printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name);
- j = de4x5_debug;
- de4x5_debug |= DEBUG_MII;
- de4x5_dbg_mii(dev, k);
- de4x5_debug = j;
- printk("\n");
- } else {
- goto purgatory;
- }
- }
- }
- purgatory:
- lp->active = 0;
- if (lp->phy[0].id) { /* Reset the PHY devices */
- for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++) { /*For each PHY*/
- mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
- while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
-
- de4x5_dbg_mii(dev, k);
- }
- }
- if (!lp->mii_cnt) lp->useMII = false;
-
- return lp->mii_cnt;
-}
-
-static char *
-build_setup_frame(struct net_device *dev, int mode)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int i;
- char *pa = lp->setup_frame;
-
- /* Initialise the setup frame */
- if (mode == ALL) {
- memset(lp->setup_frame, 0, SETUP_FRAME_LEN);
- }
-
- if (lp->setup_f == HASH_PERF) {
- for (pa=lp->setup_frame+IMPERF_PA_OFFSET, i=0; i<ETH_ALEN; i++) {
- *(pa + i) = dev->dev_addr[i]; /* Host address */
- if (i & 0x01) pa += 2;
- }
- *(lp->setup_frame + (DE4X5_HASH_TABLE_LEN >> 3) - 3) = 0x80;
- } else {
- for (i=0; i<ETH_ALEN; i++) { /* Host address */
- *(pa + (i&1)) = dev->dev_addr[i];
- if (i & 0x01) pa += 4;
- }
- for (i=0; i<ETH_ALEN; i++) { /* Broadcast address */
- *(pa + (i&1)) = (char) 0xff;
- if (i & 0x01) pa += 4;
- }
- }
-
- return pa; /* Points to the next entry */
-}
-
-static void
-disable_ast(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- del_timer_sync(&lp->timer);
-}
-
-static long
-de4x5_switch_mac_port(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
- s32 omr;
-
- STOP_DE4X5;
-
- /* Assert the OMR_PS bit in CSR6 */
- omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR |
- OMR_FDX));
- omr |= lp->infoblock_csr6;
- if (omr & OMR_PS) omr |= OMR_HBD;
- outl(omr, DE4X5_OMR);
-
- /* Soft Reset */
- RESET_DE4X5;
-
- /* Restore the GEP - especially for COMPACT and Type 0 Infoblocks */
- if (lp->chipset == DC21140) {
- gep_wr(lp->cache.gepc, dev);
- gep_wr(lp->cache.gep, dev);
- } else if ((lp->chipset & ~0x0ff) == DC2114x) {
- reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, lp->cache.csr15);
- }
-
- /* Restore CSR6 */
- outl(omr, DE4X5_OMR);
-
- /* Reset CSR8 */
- inl(DE4X5_MFC);
-
- return omr;
-}
-
-static void
-gep_wr(s32 data, struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- if (lp->chipset == DC21140) {
- outl(data, DE4X5_GEP);
- } else if ((lp->chipset & ~0x00ff) == DC2114x) {
- outl((data<<16) | lp->cache.csr15, DE4X5_SIGR);
- }
-}
-
-static int
-gep_rd(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- if (lp->chipset == DC21140) {
- return inl(DE4X5_GEP);
- } else if ((lp->chipset & ~0x00ff) == DC2114x) {
- return inl(DE4X5_SIGR) & 0x000fffff;
- }
-
- return 0;
-}
-
-static void
-yawn(struct net_device *dev, int state)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- if ((lp->chipset == DC21040) || (lp->chipset == DC21140)) return;
-
- if(lp->bus == EISA) {
- switch(state) {
- case WAKEUP:
- outb(WAKEUP, PCI_CFPM);
- mdelay(10);
- break;
-
- case SNOOZE:
- outb(SNOOZE, PCI_CFPM);
- break;
-
- case SLEEP:
- outl(0, DE4X5_SICR);
- outb(SLEEP, PCI_CFPM);
- break;
- }
- } else {
- struct pci_dev *pdev = to_pci_dev (lp->gendev);
- switch(state) {
- case WAKEUP:
- pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP);
- mdelay(10);
- break;
-
- case SNOOZE:
- pci_write_config_byte(pdev, PCI_CFDA_PSM, SNOOZE);
- break;
-
- case SLEEP:
- outl(0, DE4X5_SICR);
- pci_write_config_byte(pdev, PCI_CFDA_PSM, SLEEP);
- break;
- }
- }
-}
-
-static void
-de4x5_parse_params(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- char *p, *q, t;
-
- lp->params.fdx = false;
- lp->params.autosense = AUTO;
-
- if (args == NULL) return;
-
- if ((p = strstr(args, dev->name))) {
- if (!(q = strstr(p+strlen(dev->name), "eth"))) q = p + strlen(p);
- t = *q;
- *q = '\0';
-
- if (strstr(p, "fdx") || strstr(p, "FDX")) lp->params.fdx = true;
-
- if (strstr(p, "autosense") || strstr(p, "AUTOSENSE")) {
- if (strstr(p, "TP_NW")) {
- lp->params.autosense = TP_NW;
- } else if (strstr(p, "TP")) {
- lp->params.autosense = TP;
- } else if (strstr(p, "BNC_AUI")) {
- lp->params.autosense = BNC;
- } else if (strstr(p, "BNC")) {
- lp->params.autosense = BNC;
- } else if (strstr(p, "AUI")) {
- lp->params.autosense = AUI;
- } else if (strstr(p, "10Mb")) {
- lp->params.autosense = _10Mb;
- } else if (strstr(p, "100Mb")) {
- lp->params.autosense = _100Mb;
- } else if (strstr(p, "AUTO")) {
- lp->params.autosense = AUTO;
- }
- }
- *q = t;
- }
-}
-
-static void
-de4x5_dbg_open(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- int i;
-
- if (de4x5_debug & DEBUG_OPEN) {
- printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq);
- printk("\tphysical address: %pM\n", dev->dev_addr);
- printk("Descriptor head addresses:\n");
- printk("\t0x%8.8lx 0x%8.8lx\n",(u_long)lp->rx_ring,(u_long)lp->tx_ring);
- printk("Descriptor addresses:\nRX: ");
- for (i=0;i<lp->rxRingSize-1;i++){
- if (i < 3) {
- printk("0x%8.8lx ",(u_long)&lp->rx_ring[i].status);
- }
- }
- printk("...0x%8.8lx\n",(u_long)&lp->rx_ring[i].status);
- printk("TX: ");
- for (i=0;i<lp->txRingSize-1;i++){
- if (i < 3) {
- printk("0x%8.8lx ", (u_long)&lp->tx_ring[i].status);
- }
- }
- printk("...0x%8.8lx\n", (u_long)&lp->tx_ring[i].status);
- printk("Descriptor buffers:\nRX: ");
- for (i=0;i<lp->rxRingSize-1;i++){
- if (i < 3) {
- printk("0x%8.8x ",le32_to_cpu(lp->rx_ring[i].buf));
- }
- }
- printk("...0x%8.8x\n",le32_to_cpu(lp->rx_ring[i].buf));
- printk("TX: ");
- for (i=0;i<lp->txRingSize-1;i++){
- if (i < 3) {
- printk("0x%8.8x ", le32_to_cpu(lp->tx_ring[i].buf));
- }
- }
- printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf));
- printk("Ring size:\nRX: %d\nTX: %d\n",
- (short)lp->rxRingSize,
- (short)lp->txRingSize);
- }
-}
-
-static void
-de4x5_dbg_mii(struct net_device *dev, int k)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- u_long iobase = dev->base_addr;
-
- if (de4x5_debug & DEBUG_MII) {
- printk("\nMII device address: %d\n", lp->phy[k].addr);
- printk("MII CR: %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII));
- printk("MII SR: %x\n",mii_rd(MII_SR,lp->phy[k].addr,DE4X5_MII));
- printk("MII ID0: %x\n",mii_rd(MII_ID0,lp->phy[k].addr,DE4X5_MII));
- printk("MII ID1: %x\n",mii_rd(MII_ID1,lp->phy[k].addr,DE4X5_MII));
- if (lp->phy[k].id != BROADCOM_T4) {
- printk("MII ANA: %x\n",mii_rd(0x04,lp->phy[k].addr,DE4X5_MII));
- printk("MII ANC: %x\n",mii_rd(0x05,lp->phy[k].addr,DE4X5_MII));
- }
- printk("MII 16: %x\n",mii_rd(0x10,lp->phy[k].addr,DE4X5_MII));
- if (lp->phy[k].id != BROADCOM_T4) {
- printk("MII 17: %x\n",mii_rd(0x11,lp->phy[k].addr,DE4X5_MII));
- printk("MII 18: %x\n",mii_rd(0x12,lp->phy[k].addr,DE4X5_MII));
- } else {
- printk("MII 20: %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII));
- }
- }
-}
-
-static void
-de4x5_dbg_media(struct net_device *dev)
-{
- struct de4x5_private *lp = netdev_priv(dev);
-
- if (lp->media != lp->c_media) {
- if (de4x5_debug & DEBUG_MEDIA) {
- printk("%s: media is %s%s\n", dev->name,
- (lp->media == NC ? "unconnected, link down or incompatible connection" :
- (lp->media == TP ? "TP" :
- (lp->media == ANS ? "TP/Nway" :
- (lp->media == BNC ? "BNC" :
- (lp->media == AUI ? "AUI" :
- (lp->media == BNC_AUI ? "BNC/AUI" :
- (lp->media == EXT_SIA ? "EXT SIA" :
- (lp->media == _100Mb ? "100Mb/s" :
- (lp->media == _10Mb ? "10Mb/s" :
- "???"
- ))))))))), (lp->fdx?" full duplex.":"."));
- }
- lp->c_media = lp->media;
- }
-}
-
-static void
-de4x5_dbg_srom(struct de4x5_srom *p)
-{
- int i;
-
- if (de4x5_debug & DEBUG_SROM) {
- printk("Sub-system Vendor ID: %04x\n", *((u_short *)p->sub_vendor_id));
- printk("Sub-system ID: %04x\n", *((u_short *)p->sub_system_id));
- printk("ID Block CRC: %02x\n", (u_char)(p->id_block_crc));
- printk("SROM version: %02x\n", (u_char)(p->version));
- printk("# controllers: %02x\n", (u_char)(p->num_controllers));
-
- printk("Hardware Address: %pM\n", p->ieee_addr);
- printk("CRC checksum: %04x\n", (u_short)(p->chksum));
- for (i=0; i<64; i++) {
- printk("%3d %04x\n", i<<1, (u_short)*((u_short *)p+i));
- }
- }
-}
-
-static void
-de4x5_dbg_rx(struct sk_buff *skb, int len)
-{
- int i, j;
-
- if (de4x5_debug & DEBUG_RX) {
- printk("R: %pM <- %pM len/SAP:%02x%02x [%d]\n",
- skb->data, &skb->data[6],
- (u_char)skb->data[12],
- (u_char)skb->data[13],
- len);
- for (j=0; len>0;j+=16, len-=16) {
- printk(" %03x: ",j);
- for (i=0; i<16 && i<len; i++) {
- printk("%02x ",(u_char)skb->data[i+j]);
- }
- printk("\n");
- }
- }
-}
-
-/*
-** Perform IOCTL call functions here. Some are privileged operations and the
-** effective uid is checked in those cases. In the normal course of events
-** this function is only used for my testing.
-*/
-static int
-de4x5_siocdevprivate(struct net_device *dev, struct ifreq *rq, void __user *data, int cmd)
-{
- struct de4x5_private *lp = netdev_priv(dev);
- struct de4x5_ioctl *ioc = (struct de4x5_ioctl *) &rq->ifr_ifru;
- u_long iobase = dev->base_addr;
- int i, j, status = 0;
- s32 omr;
- union {
- u8 addr[144];
- u16 sval[72];
- u32 lval[36];
- } tmp;
- u_long flags = 0;
-
- if (cmd != SIOCDEVPRIVATE || in_compat_syscall())
- return -EOPNOTSUPP;
-
- switch(ioc->cmd) {
- case DE4X5_GET_HWADDR: /* Get the hardware address */
- ioc->len = ETH_ALEN;
- for (i=0; i<ETH_ALEN; i++) {
- tmp.addr[i] = dev->dev_addr[i];
- }
- if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
- break;
-
- case DE4X5_SET_HWADDR: /* Set the hardware address */
- if (!capable(CAP_NET_ADMIN)) return -EPERM;
- if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) return -EFAULT;
- if (netif_queue_stopped(dev))
- return -EBUSY;
- netif_stop_queue(dev);
- eth_hw_addr_set(dev, tmp.addr);
- build_setup_frame(dev, PHYS_ADDR_ONLY);
- /* Set up the descriptor and give ownership to the card */
- load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
- SETUP_FRAME_LEN, (struct sk_buff *)1);
- lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
- outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */
- netif_wake_queue(dev); /* Unlock the TX ring */
- break;
-
- case DE4X5_SAY_BOO: /* Say "Boo!" to the kernel log file */
- if (!capable(CAP_NET_ADMIN)) return -EPERM;
- printk("%s: Boo!\n", dev->name);
- break;
-
- case DE4X5_MCA_EN: /* Enable pass all multicast addressing */
- if (!capable(CAP_NET_ADMIN)) return -EPERM;
- omr = inl(DE4X5_OMR);
- omr |= OMR_PM;
- outl(omr, DE4X5_OMR);
- break;
-
- case DE4X5_GET_STATS: /* Get the driver statistics */
- {
- struct pkt_stats statbuf;
- ioc->len = sizeof(statbuf);
- spin_lock_irqsave(&lp->lock, flags);
- memcpy(&statbuf, &lp->pktStats, ioc->len);
- spin_unlock_irqrestore(&lp->lock, flags);
- if (copy_to_user(ioc->data, &statbuf, ioc->len))
- return -EFAULT;
- break;
- }
- case DE4X5_CLR_STATS: /* Zero out the driver statistics */
- if (!capable(CAP_NET_ADMIN)) return -EPERM;
- spin_lock_irqsave(&lp->lock, flags);
- memset(&lp->pktStats, 0, sizeof(lp->pktStats));
- spin_unlock_irqrestore(&lp->lock, flags);
- break;
-
- case DE4X5_GET_OMR: /* Get the OMR Register contents */
- tmp.addr[0] = inl(DE4X5_OMR);
- if (copy_to_user(ioc->data, tmp.addr, 1)) return -EFAULT;
- break;
-
- case DE4X5_SET_OMR: /* Set the OMR Register contents */
- if (!capable(CAP_NET_ADMIN)) return -EPERM;
- if (copy_from_user(tmp.addr, ioc->data, 1)) return -EFAULT;
- outl(tmp.addr[0], DE4X5_OMR);
- break;
-
- case DE4X5_GET_REG: /* Get the DE4X5 Registers */
- j = 0;
- tmp.lval[0] = inl(DE4X5_STS); j+=4;
- tmp.lval[1] = inl(DE4X5_BMR); j+=4;
- tmp.lval[2] = inl(DE4X5_IMR); j+=4;
- tmp.lval[3] = inl(DE4X5_OMR); j+=4;
- tmp.lval[4] = inl(DE4X5_SISR); j+=4;
- tmp.lval[5] = inl(DE4X5_SICR); j+=4;
- tmp.lval[6] = inl(DE4X5_STRR); j+=4;
- tmp.lval[7] = inl(DE4X5_SIGR); j+=4;
- ioc->len = j;
- if (copy_to_user(ioc->data, tmp.lval, ioc->len))
- return -EFAULT;
- break;
-
-#define DE4X5_DUMP 0x0f /* Dump the DE4X5 Status */
-/*
- case DE4X5_DUMP:
- j = 0;
- tmp.addr[j++] = dev->irq;
- for (i=0; i<ETH_ALEN; i++) {
- tmp.addr[j++] = dev->dev_addr[i];
- }
- tmp.addr[j++] = lp->rxRingSize;
- tmp.lval[j>>2] = (long)lp->rx_ring; j+=4;
- tmp.lval[j>>2] = (long)lp->tx_ring; j+=4;
-
- for (i=0;i<lp->rxRingSize-1;i++){
- if (i < 3) {
- tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
- }
- }
- tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
- for (i=0;i<lp->txRingSize-1;i++){
- if (i < 3) {
- tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
- }
- }
- tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
-
- for (i=0;i<lp->rxRingSize-1;i++){
- if (i < 3) {
- tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
- }
- }
- tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
- for (i=0;i<lp->txRingSize-1;i++){
- if (i < 3) {
- tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
- }
- }
- tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
-
- for (i=0;i<lp->rxRingSize;i++){
- tmp.lval[j>>2] = le32_to_cpu(lp->rx_ring[i].status); j+=4;
- }
- for (i=0;i<lp->txRingSize;i++){
- tmp.lval[j>>2] = le32_to_cpu(lp->tx_ring[i].status); j+=4;
- }
-
- tmp.lval[j>>2] = inl(DE4X5_BMR); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_TPD); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_RPD); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_RRBA); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_TRBA); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_STS); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_OMR); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_IMR); j+=4;
- tmp.lval[j>>2] = lp->chipset; j+=4;
- if (lp->chipset == DC21140) {
- tmp.lval[j>>2] = gep_rd(dev); j+=4;
- } else {
- tmp.lval[j>>2] = inl(DE4X5_SISR); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_SICR); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_STRR); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4;
- }
- tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4;
- if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
- tmp.lval[j>>2] = lp->active; j+=4;
- tmp.lval[j>>2]=mii_rd(MII_CR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
- tmp.lval[j>>2]=mii_rd(MII_SR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
- tmp.lval[j>>2]=mii_rd(MII_ID0,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
- tmp.lval[j>>2]=mii_rd(MII_ID1,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
- if (lp->phy[lp->active].id != BROADCOM_T4) {
- tmp.lval[j>>2]=mii_rd(MII_ANA,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
- tmp.lval[j>>2]=mii_rd(MII_ANLPA,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
- }
- tmp.lval[j>>2]=mii_rd(0x10,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
- if (lp->phy[lp->active].id != BROADCOM_T4) {
- tmp.lval[j>>2]=mii_rd(0x11,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
- tmp.lval[j>>2]=mii_rd(0x12,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
- } else {
- tmp.lval[j>>2]=mii_rd(0x14,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
- }
- }
-
- tmp.addr[j++] = lp->txRingSize;
- tmp.addr[j++] = netif_queue_stopped(dev);
-
- ioc->len = j;
- if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
- break;
-
-*/
- default:
- return -EOPNOTSUPP;
- }
-
- return status;
-}
-
-static int __init de4x5_module_init (void)
-{
- int err = 0;
-
-#ifdef CONFIG_PCI
- err = pci_register_driver(&de4x5_pci_driver);
-#endif
-#ifdef CONFIG_EISA
- err |= eisa_driver_register (&de4x5_eisa_driver);
-#endif
-
- return err;
-}
-
-static void __exit de4x5_module_exit (void)
-{
-#ifdef CONFIG_PCI
- pci_unregister_driver (&de4x5_pci_driver);
-#endif
-#ifdef CONFIG_EISA
- eisa_driver_unregister (&de4x5_eisa_driver);
-#endif
-}
-
-module_init (de4x5_module_init);
-module_exit (de4x5_module_exit);
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.h b/drivers/net/ethernet/dec/tulip/de4x5.h
deleted file mode 100644
index 1bfdc9b117f6..000000000000
--- a/drivers/net/ethernet/dec/tulip/de4x5.h
+++ /dev/null
@@ -1,1017 +0,0 @@
-/*
- Copyright 1994 Digital Equipment Corporation.
-
- This software may be used and distributed according to the terms of the
- GNU General Public License, incorporated herein by reference.
-
- The author may be reached as davies at wanton.lkg.dec.com or Digital
- Equipment Corporation, 550 King Street, Littleton MA 01460.
-
- =========================================================================
-*/
-
-/*
-** DC21040 CSR<1..15> Register Address Map
-*/
-#define DE4X5_BMR iobase+(0x000 << lp->bus) /* Bus Mode Register */
-#define DE4X5_TPD iobase+(0x008 << lp->bus) /* Transmit Poll Demand Reg */
-#define DE4X5_RPD iobase+(0x010 << lp->bus) /* Receive Poll Demand Reg */
-#define DE4X5_RRBA iobase+(0x018 << lp->bus) /* RX Ring Base Address Reg */
-#define DE4X5_TRBA iobase+(0x020 << lp->bus) /* TX Ring Base Address Reg */
-#define DE4X5_STS iobase+(0x028 << lp->bus) /* Status Register */
-#define DE4X5_OMR iobase+(0x030 << lp->bus) /* Operation Mode Register */
-#define DE4X5_IMR iobase+(0x038 << lp->bus) /* Interrupt Mask Register */
-#define DE4X5_MFC iobase+(0x040 << lp->bus) /* Missed Frame Counter */
-#define DE4X5_APROM iobase+(0x048 << lp->bus) /* Ethernet Address PROM */
-#define DE4X5_BROM iobase+(0x048 << lp->bus) /* Boot ROM Register */
-#define DE4X5_SROM iobase+(0x048 << lp->bus) /* Serial ROM Register */
-#define DE4X5_MII iobase+(0x048 << lp->bus) /* MII Interface Register */
-#define DE4X5_DDR iobase+(0x050 << lp->bus) /* Data Diagnostic Register */
-#define DE4X5_FDR iobase+(0x058 << lp->bus) /* Full Duplex Register */
-#define DE4X5_GPT iobase+(0x058 << lp->bus) /* General Purpose Timer Reg.*/
-#define DE4X5_GEP iobase+(0x060 << lp->bus) /* General Purpose Register */
-#define DE4X5_SISR iobase+(0x060 << lp->bus) /* SIA Status Register */
-#define DE4X5_SICR iobase+(0x068 << lp->bus) /* SIA Connectivity Register */
-#define DE4X5_STRR iobase+(0x070 << lp->bus) /* SIA TX/RX Register */
-#define DE4X5_SIGR iobase+(0x078 << lp->bus) /* SIA General Register */
-
-/*
-** EISA Register Address Map
-*/
-#define EISA_ID iobase+0x0c80 /* EISA ID Registers */
-#define EISA_ID0 iobase+0x0c80 /* EISA ID Register 0 */
-#define EISA_ID1 iobase+0x0c81 /* EISA ID Register 1 */
-#define EISA_ID2 iobase+0x0c82 /* EISA ID Register 2 */
-#define EISA_ID3 iobase+0x0c83 /* EISA ID Register 3 */
-#define EISA_CR iobase+0x0c84 /* EISA Control Register */
-#define EISA_REG0 iobase+0x0c88 /* EISA Configuration Register 0 */
-#define EISA_REG1 iobase+0x0c89 /* EISA Configuration Register 1 */
-#define EISA_REG2 iobase+0x0c8a /* EISA Configuration Register 2 */
-#define EISA_REG3 iobase+0x0c8f /* EISA Configuration Register 3 */
-#define EISA_APROM iobase+0x0c90 /* Ethernet Address PROM */
-
-/*
-** PCI/EISA Configuration Registers Address Map
-*/
-#define PCI_CFID iobase+0x0008 /* PCI Configuration ID Register */
-#define PCI_CFCS iobase+0x000c /* PCI Command/Status Register */
-#define PCI_CFRV iobase+0x0018 /* PCI Revision Register */
-#define PCI_CFLT iobase+0x001c /* PCI Latency Timer Register */
-#define PCI_CBIO iobase+0x0028 /* PCI Base I/O Register */
-#define PCI_CBMA iobase+0x002c /* PCI Base Memory Address Register */
-#define PCI_CBER iobase+0x0030 /* PCI Expansion ROM Base Address Reg. */
-#define PCI_CFIT iobase+0x003c /* PCI Configuration Interrupt Register */
-#define PCI_CFDA iobase+0x0040 /* PCI Driver Area Register */
-#define PCI_CFDD iobase+0x0041 /* PCI Driver Dependent Area Register */
-#define PCI_CFPM iobase+0x0043 /* PCI Power Management Area Register */
-
-/*
-** EISA Configuration Register 0 bit definitions
-*/
-#define ER0_BSW 0x80 /* EISA Bus Slave Width, 1: 32 bits */
-#define ER0_BMW 0x40 /* EISA Bus Master Width, 1: 32 bits */
-#define ER0_EPT 0x20 /* EISA PREEMPT Time, 0: 23 BCLKs */
-#define ER0_ISTS 0x10 /* Interrupt Status (X) */
-#define ER0_LI 0x08 /* Latch Interrupts */
-#define ER0_INTL 0x06 /* INTerrupt Level */
-#define ER0_INTT 0x01 /* INTerrupt Type, 0: Level, 1: Edge */
-
-/*
-** EISA Configuration Register 1 bit definitions
-*/
-#define ER1_IAM 0xe0 /* ISA Address Mode */
-#define ER1_IAE 0x10 /* ISA Addressing Enable */
-#define ER1_UPIN 0x0f /* User Pins */
-
-/*
-** EISA Configuration Register 2 bit definitions
-*/
-#define ER2_BRS 0xc0 /* Boot ROM Size */
-#define ER2_BRA 0x3c /* Boot ROM Address <16:13> */
-
-/*
-** EISA Configuration Register 3 bit definitions
-*/
-#define ER3_BWE 0x40 /* Burst Write Enable */
-#define ER3_BRE 0x04 /* Burst Read Enable */
-#define ER3_LSR 0x02 /* Local Software Reset */
-
-/*
-** PCI Configuration ID Register (PCI_CFID). The Device IDs are left
-** shifted 8 bits to allow detection of DC21142 and DC21143 variants with
-** the configuration revision register step number.
-*/
-#define CFID_DID 0xff00 /* Device ID */
-#define CFID_VID 0x00ff /* Vendor ID */
-#define DC21040_DID 0x0200 /* Unique Device ID # */
-#define DC21040_VID 0x1011 /* DC21040 Manufacturer */
-#define DC21041_DID 0x1400 /* Unique Device ID # */
-#define DC21041_VID 0x1011 /* DC21041 Manufacturer */
-#define DC21140_DID 0x0900 /* Unique Device ID # */
-#define DC21140_VID 0x1011 /* DC21140 Manufacturer */
-#define DC2114x_DID 0x1900 /* Unique Device ID # */
-#define DC2114x_VID 0x1011 /* DC2114[23] Manufacturer */
-
-/*
-** Chipset defines
-*/
-#define DC21040 DC21040_DID
-#define DC21041 DC21041_DID
-#define DC21140 DC21140_DID
-#define DC2114x DC2114x_DID
-#define DC21142 (DC2114x_DID | 0x0010)
-#define DC21143 (DC2114x_DID | 0x0030)
-#define DC2114x_BRK 0x0020 /* CFRV break between DC21142 & DC21143 */
-
-#define is_DC21040 ((vendor == DC21040_VID) && (device == DC21040_DID))
-#define is_DC21041 ((vendor == DC21041_VID) && (device == DC21041_DID))
-#define is_DC21140 ((vendor == DC21140_VID) && (device == DC21140_DID))
-#define is_DC2114x ((vendor == DC2114x_VID) && (device == DC2114x_DID))
-#define is_DC21142 ((vendor == DC2114x_VID) && (device == DC21142))
-#define is_DC21143 ((vendor == DC2114x_VID) && (device == DC21143))
-
-/*
-** PCI Configuration Command/Status Register (PCI_CFCS)
-*/
-#define CFCS_DPE 0x80000000 /* Detected Parity Error (S) */
-#define CFCS_SSE 0x40000000 /* Signal System Error (S) */
-#define CFCS_RMA 0x20000000 /* Receive Master Abort (S) */
-#define CFCS_RTA 0x10000000 /* Receive Target Abort (S) */
-#define CFCS_DST 0x06000000 /* DEVSEL Timing (S) */
-#define CFCS_DPR 0x01000000 /* Data Parity Report (S) */
-#define CFCS_FBB 0x00800000 /* Fast Back-To-Back (S) */
-#define CFCS_SEE 0x00000100 /* System Error Enable (C) */
-#define CFCS_PER 0x00000040 /* Parity Error Response (C) */
-#define CFCS_MO 0x00000004 /* Master Operation (C) */
-#define CFCS_MSA 0x00000002 /* Memory Space Access (C) */
-#define CFCS_IOSA 0x00000001 /* I/O Space Access (C) */
-
-/*
-** PCI Configuration Revision Register (PCI_CFRV)
-*/
-#define CFRV_BC 0xff000000 /* Base Class */
-#define CFRV_SC 0x00ff0000 /* Subclass */
-#define CFRV_RN 0x000000f0 /* Revision Number */
-#define CFRV_SN 0x0000000f /* Step Number */
-#define BASE_CLASS 0x02000000 /* Indicates Network Controller */
-#define SUB_CLASS 0x00000000 /* Indicates Ethernet Controller */
-#define STEP_NUMBER 0x00000020 /* Increments for future chips */
-#define REV_NUMBER 0x00000003 /* 0x00, 0x01, 0x02, 0x03: Rev in Step */
-#define CFRV_MASK 0xffff0000 /* Register mask */
-
-/*
-** PCI Configuration Latency Timer Register (PCI_CFLT)
-*/
-#define CFLT_BC 0x0000ff00 /* Latency Timer bits */
-
-/*
-** PCI Configuration Base I/O Address Register (PCI_CBIO)
-*/
-#define CBIO_MASK -128 /* Base I/O Address Mask */
-#define CBIO_IOSI 0x00000001 /* I/O Space Indicator (RO, value is 1) */
-
-/*
-** PCI Configuration Card Information Structure Register (PCI_CCIS)
-*/
-#define CCIS_ROMI 0xf0000000 /* ROM Image */
-#define CCIS_ASO 0x0ffffff8 /* Address Space Offset */
-#define CCIS_ASI 0x00000007 /* Address Space Indicator */
-
-/*
-** PCI Configuration Subsystem ID Register (PCI_SSID)
-*/
-#define SSID_SSID 0xffff0000 /* Subsystem ID */
-#define SSID_SVID 0x0000ffff /* Subsystem Vendor ID */
-
-/*
-** PCI Configuration Expansion ROM Base Address Register (PCI_CBER)
-*/
-#define CBER_MASK 0xfffffc00 /* Expansion ROM Base Address Mask */
-#define CBER_ROME 0x00000001 /* ROM Enable */
-
-/*
-** PCI Configuration Interrupt Register (PCI_CFIT)
-*/
-#define CFIT_MXLT 0xff000000 /* MAX_LAT Value (0.25us periods) */
-#define CFIT_MNGT 0x00ff0000 /* MIN_GNT Value (0.25us periods) */
-#define CFIT_IRQP 0x0000ff00 /* Interrupt Pin */
-#define CFIT_IRQL 0x000000ff /* Interrupt Line */
-
-/*
-** PCI Configuration Power Management Area Register (PCI_CFPM)
-*/
-#define SLEEP 0x80 /* Power Saving Sleep Mode */
-#define SNOOZE 0x40 /* Power Saving Snooze Mode */
-#define WAKEUP 0x00 /* Power Saving Wakeup */
-
-#define PCI_CFDA_DSU 0x41 /* 8 bit Configuration Space Address */
-#define PCI_CFDA_PSM 0x43 /* 8 bit Configuration Space Address */
-
-/*
-** DC21040 Bus Mode Register (DE4X5_BMR)
-*/
-#define BMR_RML 0x00200000 /* [Memory] Read Multiple */
-#define BMR_DBO 0x00100000 /* Descriptor Byte Ordering (Endian) */
-#define BMR_TAP 0x000e0000 /* Transmit Automatic Polling */
-#define BMR_DAS 0x00010000 /* Diagnostic Address Space */
-#define BMR_CAL 0x0000c000 /* Cache Alignment */
-#define BMR_PBL 0x00003f00 /* Programmable Burst Length */
-#define BMR_BLE 0x00000080 /* Big/Little Endian */
-#define BMR_DSL 0x0000007c /* Descriptor Skip Length */
-#define BMR_BAR 0x00000002 /* Bus ARbitration */
-#define BMR_SWR 0x00000001 /* Software Reset */
-
- /* Timings here are for 10BASE-T/AUI only*/
-#define TAP_NOPOLL 0x00000000 /* No automatic polling */
-#define TAP_200US 0x00020000 /* TX automatic polling every 200us */
-#define TAP_800US 0x00040000 /* TX automatic polling every 800us */
-#define TAP_1_6MS 0x00060000 /* TX automatic polling every 1.6ms */
-#define TAP_12_8US 0x00080000 /* TX automatic polling every 12.8us */
-#define TAP_25_6US 0x000a0000 /* TX automatic polling every 25.6us */
-#define TAP_51_2US 0x000c0000 /* TX automatic polling every 51.2us */
-#define TAP_102_4US 0x000e0000 /* TX automatic polling every 102.4us */
-
-#define CAL_NOUSE 0x00000000 /* Not used */
-#define CAL_8LONG 0x00004000 /* 8-longword alignment */
-#define CAL_16LONG 0x00008000 /* 16-longword alignment */
-#define CAL_32LONG 0x0000c000 /* 32-longword alignment */
-
-#define PBL_0 0x00000000 /* DMA burst length = amount in RX FIFO */
-#define PBL_1 0x00000100 /* 1 longword DMA burst length */
-#define PBL_2 0x00000200 /* 2 longwords DMA burst length */
-#define PBL_4 0x00000400 /* 4 longwords DMA burst length */
-#define PBL_8 0x00000800 /* 8 longwords DMA burst length */
-#define PBL_16 0x00001000 /* 16 longwords DMA burst length */
-#define PBL_32 0x00002000 /* 32 longwords DMA burst length */
-
-#define DSL_0 0x00000000 /* 0 longword / descriptor */
-#define DSL_1 0x00000004 /* 1 longword / descriptor */
-#define DSL_2 0x00000008 /* 2 longwords / descriptor */
-#define DSL_4 0x00000010 /* 4 longwords / descriptor */
-#define DSL_8 0x00000020 /* 8 longwords / descriptor */
-#define DSL_16 0x00000040 /* 16 longwords / descriptor */
-#define DSL_32 0x00000080 /* 32 longwords / descriptor */
-
-/*
-** DC21040 Transmit Poll Demand Register (DE4X5_TPD)
-*/
-#define TPD 0x00000001 /* Transmit Poll Demand */
-
-/*
-** DC21040 Receive Poll Demand Register (DE4X5_RPD)
-*/
-#define RPD 0x00000001 /* Receive Poll Demand */
-
-/*
-** DC21040 Receive Ring Base Address Register (DE4X5_RRBA)
-*/
-#define RRBA 0xfffffffc /* RX Descriptor List Start Address */
-
-/*
-** DC21040 Transmit Ring Base Address Register (DE4X5_TRBA)
-*/
-#define TRBA 0xfffffffc /* TX Descriptor List Start Address */
-
-/*
-** Status Register (DE4X5_STS)
-*/
-#define STS_GPI 0x04000000 /* General Purpose Port Interrupt */
-#define STS_BE 0x03800000 /* Bus Error Bits */
-#define STS_TS 0x00700000 /* Transmit Process State */
-#define STS_RS 0x000e0000 /* Receive Process State */
-#define STS_NIS 0x00010000 /* Normal Interrupt Summary */
-#define STS_AIS 0x00008000 /* Abnormal Interrupt Summary */
-#define STS_ER 0x00004000 /* Early Receive */
-#define STS_FBE 0x00002000 /* Fatal Bus Error */
-#define STS_SE 0x00002000 /* System Error */
-#define STS_LNF 0x00001000 /* Link Fail */
-#define STS_FD 0x00000800 /* Full-Duplex Short Frame Received */
-#define STS_TM 0x00000800 /* Timer Expired (DC21041) */
-#define STS_ETI 0x00000400 /* Early Transmit Interrupt */
-#define STS_AT 0x00000400 /* AUI/TP Pin */
-#define STS_RWT 0x00000200 /* Receive Watchdog Time-Out */
-#define STS_RPS 0x00000100 /* Receive Process Stopped */
-#define STS_RU 0x00000080 /* Receive Buffer Unavailable */
-#define STS_RI 0x00000040 /* Receive Interrupt */
-#define STS_UNF 0x00000020 /* Transmit Underflow */
-#define STS_LNP 0x00000010 /* Link Pass */
-#define STS_ANC 0x00000010 /* Autonegotiation Complete */
-#define STS_TJT 0x00000008 /* Transmit Jabber Time-Out */
-#define STS_TU 0x00000004 /* Transmit Buffer Unavailable */
-#define STS_TPS 0x00000002 /* Transmit Process Stopped */
-#define STS_TI 0x00000001 /* Transmit Interrupt */
-
-#define EB_PAR 0x00000000 /* Parity Error */
-#define EB_MA 0x00800000 /* Master Abort */
-#define EB_TA 0x01000000 /* Target Abort */
-#define EB_RES0 0x01800000 /* Reserved */
-#define EB_RES1 0x02000000 /* Reserved */
-
-#define TS_STOP 0x00000000 /* Stopped */
-#define TS_FTD 0x00100000 /* Fetch Transmit Descriptor */
-#define TS_WEOT 0x00200000 /* Wait for End Of Transmission */
-#define TS_QDAT 0x00300000 /* Queue skb data into TX FIFO */
-#define TS_RES 0x00400000 /* Reserved */
-#define TS_SPKT 0x00500000 /* Setup Packet */
-#define TS_SUSP 0x00600000 /* Suspended */
-#define TS_CLTD 0x00700000 /* Close Transmit Descriptor */
-
-#define RS_STOP 0x00000000 /* Stopped */
-#define RS_FRD 0x00020000 /* Fetch Receive Descriptor */
-#define RS_CEOR 0x00040000 /* Check for End of Receive Packet */
-#define RS_WFRP 0x00060000 /* Wait for Receive Packet */
-#define RS_SUSP 0x00080000 /* Suspended */
-#define RS_CLRD 0x000a0000 /* Close Receive Descriptor */
-#define RS_FLUSH 0x000c0000 /* Flush RX FIFO */
-#define RS_QRFS 0x000e0000 /* Queue RX FIFO into RX Skb */
-
-#define INT_CANCEL 0x0001ffff /* For zeroing all interrupt sources */
-
-/*
-** Operation Mode Register (DE4X5_OMR)
-*/
-#define OMR_SC 0x80000000 /* Special Capture Effect Enable */
-#define OMR_RA 0x40000000 /* Receive All */
-#define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */
-#define OMR_SCR 0x01000000 /* Scrambler Mode */
-#define OMR_PCS 0x00800000 /* PCS Function */
-#define OMR_TTM 0x00400000 /* Transmit Threshold Mode */
-#define OMR_SF 0x00200000 /* Store and Forward */
-#define OMR_HBD 0x00080000 /* HeartBeat Disable */
-#define OMR_PS 0x00040000 /* Port Select */
-#define OMR_CA 0x00020000 /* Capture Effect Enable */
-#define OMR_BP 0x00010000 /* Back Pressure */
-#define OMR_TR 0x0000c000 /* Threshold Control Bits */
-#define OMR_ST 0x00002000 /* Start/Stop Transmission Command */
-#define OMR_FC 0x00001000 /* Force Collision Mode */
-#define OMR_OM 0x00000c00 /* Operating Mode */
-#define OMR_FDX 0x00000200 /* Full Duplex Mode */
-#define OMR_FKD 0x00000100 /* Flaky Oscillator Disable */
-#define OMR_PM 0x00000080 /* Pass All Multicast */
-#define OMR_PR 0x00000040 /* Promiscuous Mode */
-#define OMR_SB 0x00000020 /* Start/Stop Backoff Counter */
-#define OMR_IF 0x00000010 /* Inverse Filtering */
-#define OMR_PB 0x00000008 /* Pass Bad Frames */
-#define OMR_HO 0x00000004 /* Hash Only Filtering Mode */
-#define OMR_SR 0x00000002 /* Start/Stop Receive */
-#define OMR_HP 0x00000001 /* Hash/Perfect Receive Filtering Mode */
-
-#define TR_72 0x00000000 /* Threshold set to 72 (128) bytes */
-#define TR_96 0x00004000 /* Threshold set to 96 (256) bytes */
-#define TR_128 0x00008000 /* Threshold set to 128 (512) bytes */
-#define TR_160 0x0000c000 /* Threshold set to 160 (1024) bytes */
-
-#define OMR_DEF (OMR_SDP)
-#define OMR_SIA (OMR_SDP | OMR_TTM)
-#define OMR_SYM (OMR_SDP | OMR_SCR | OMR_PCS | OMR_HBD | OMR_PS)
-#define OMR_MII_10 (OMR_SDP | OMR_TTM | OMR_PS)
-#define OMR_MII_100 (OMR_SDP | OMR_HBD | OMR_PS)
-
-/*
-** DC21040 Interrupt Mask Register (DE4X5_IMR)
-*/
-#define IMR_GPM 0x04000000 /* General Purpose Port Mask */
-#define IMR_NIM 0x00010000 /* Normal Interrupt Summary Mask */
-#define IMR_AIM 0x00008000 /* Abnormal Interrupt Summary Mask */
-#define IMR_ERM 0x00004000 /* Early Receive Mask */
-#define IMR_FBM 0x00002000 /* Fatal Bus Error Mask */
-#define IMR_SEM 0x00002000 /* System Error Mask */
-#define IMR_LFM 0x00001000 /* Link Fail Mask */
-#define IMR_FDM 0x00000800 /* Full-Duplex (Short Frame) Mask */
-#define IMR_TMM 0x00000800 /* Timer Expired Mask (DC21041) */
-#define IMR_ETM 0x00000400 /* Early Transmit Interrupt Mask */
-#define IMR_ATM 0x00000400 /* AUI/TP Switch Mask */
-#define IMR_RWM 0x00000200 /* Receive Watchdog Time-Out Mask */
-#define IMR_RSM 0x00000100 /* Receive Stopped Mask */
-#define IMR_RUM 0x00000080 /* Receive Buffer Unavailable Mask */
-#define IMR_RIM 0x00000040 /* Receive Interrupt Mask */
-#define IMR_UNM 0x00000020 /* Underflow Interrupt Mask */
-#define IMR_ANM 0x00000010 /* Autonegotiation Complete Mask */
-#define IMR_LPM 0x00000010 /* Link Pass */
-#define IMR_TJM 0x00000008 /* Transmit Time-Out Jabber Mask */
-#define IMR_TUM 0x00000004 /* Transmit Buffer Unavailable Mask */
-#define IMR_TSM 0x00000002 /* Transmission Stopped Mask */
-#define IMR_TIM 0x00000001 /* Transmit Interrupt Mask */
-
-/*
-** Missed Frames and FIFO Overflow Counters (DE4X5_MFC)
-*/
-#define MFC_FOCO 0x10000000 /* FIFO Overflow Counter Overflow Bit */
-#define MFC_FOC 0x0ffe0000 /* FIFO Overflow Counter Bits */
-#define MFC_OVFL 0x00010000 /* Missed Frames Counter Overflow Bit */
-#define MFC_CNTR 0x0000ffff /* Missed Frames Counter Bits */
-#define MFC_FOCM 0x1ffe0000 /* FIFO Overflow Counter Mask */
-
-/*
-** DC21040 Ethernet Address PROM (DE4X5_APROM)
-*/
-#define APROM_DN 0x80000000 /* Data Not Valid */
-#define APROM_DT 0x000000ff /* Address Byte */
-
-/*
-** DC21041 Boot/Ethernet Address ROM (DE4X5_BROM)
-*/
-#define BROM_MODE 0x00008000 /* MODE_1: 0, MODE_0: 1 (read only) */
-#define BROM_RD 0x00004000 /* Read from Boot ROM */
-#define BROM_WR 0x00002000 /* Write to Boot ROM */
-#define BROM_BR 0x00001000 /* Select Boot ROM when set */
-#define BROM_SR 0x00000800 /* Select Serial ROM when set */
-#define BROM_REG 0x00000400 /* External Register Select */
-#define BROM_DT 0x000000ff /* Data Byte */
-
-/*
-** DC21041 Serial/Ethernet Address ROM (DE4X5_SROM, DE4X5_MII)
-*/
-#define MII_MDI 0x00080000 /* MII Management Data In */
-#define MII_MDO 0x00060000 /* MII Management Mode/Data Out */
-#define MII_MRD 0x00040000 /* MII Management Define Read Mode */
-#define MII_MWR 0x00000000 /* MII Management Define Write Mode */
-#define MII_MDT 0x00020000 /* MII Management Data Out */
-#define MII_MDC 0x00010000 /* MII Management Clock */
-#define MII_RD 0x00004000 /* Read from MII */
-#define MII_WR 0x00002000 /* Write to MII */
-#define MII_SEL 0x00000800 /* Select MII when RESET */
-
-#define SROM_MODE 0x00008000 /* MODE_1: 0, MODE_0: 1 (read only) */
-#define SROM_RD 0x00004000 /* Read from Boot ROM */
-#define SROM_WR 0x00002000 /* Write to Boot ROM */
-#define SROM_BR 0x00001000 /* Select Boot ROM when set */
-#define SROM_SR 0x00000800 /* Select Serial ROM when set */
-#define SROM_REG 0x00000400 /* External Register Select */
-#define SROM_DT 0x000000ff /* Data Byte */
-
-#define DT_OUT 0x00000008 /* Serial Data Out */
-#define DT_IN 0x00000004 /* Serial Data In */
-#define DT_CLK 0x00000002 /* Serial ROM Clock */
-#define DT_CS 0x00000001 /* Serial ROM Chip Select */
-
-#define MII_PREAMBLE 0xffffffff /* MII Management Preamble */
-#define MII_TEST 0xaaaaaaaa /* MII Test Signal */
-#define MII_STRD 0x06 /* Start of Frame+Op Code: use low nibble */
-#define MII_STWR 0x0a /* Start of Frame+Op Code: use low nibble */
-
-#define MII_CR 0x00 /* MII Management Control Register */
-#define MII_SR 0x01 /* MII Management Status Register */
-#define MII_ID0 0x02 /* PHY Identifier Register 0 */
-#define MII_ID1 0x03 /* PHY Identifier Register 1 */
-#define MII_ANA 0x04 /* Auto Negotiation Advertisement */
-#define MII_ANLPA 0x05 /* Auto Negotiation Link Partner Ability */
-#define MII_ANE 0x06 /* Auto Negotiation Expansion */
-#define MII_ANP 0x07 /* Auto Negotiation Next Page TX */
-
-#define DE4X5_MAX_MII 32 /* Maximum address of MII PHY devices */
-
-/*
-** MII Management Control Register
-*/
-#define MII_CR_RST 0x8000 /* RESET the PHY chip */
-#define MII_CR_LPBK 0x4000 /* Loopback enable */
-#define MII_CR_SPD 0x2000 /* 0: 10Mb/s; 1: 100Mb/s */
-#define MII_CR_10 0x0000 /* Set 10Mb/s */
-#define MII_CR_100 0x2000 /* Set 100Mb/s */
-#define MII_CR_ASSE 0x1000 /* Auto Speed Select Enable */
-#define MII_CR_PD 0x0800 /* Power Down */
-#define MII_CR_ISOL 0x0400 /* Isolate Mode */
-#define MII_CR_RAN 0x0200 /* Restart Auto Negotiation */
-#define MII_CR_FDM 0x0100 /* Full Duplex Mode */
-#define MII_CR_CTE 0x0080 /* Collision Test Enable */
-
-/*
-** MII Management Status Register
-*/
-#define MII_SR_T4C 0x8000 /* 100BASE-T4 capable */
-#define MII_SR_TXFD 0x4000 /* 100BASE-TX Full Duplex capable */
-#define MII_SR_TXHD 0x2000 /* 100BASE-TX Half Duplex capable */
-#define MII_SR_TFD 0x1000 /* 10BASE-T Full Duplex capable */
-#define MII_SR_THD 0x0800 /* 10BASE-T Half Duplex capable */
-#define MII_SR_ASSC 0x0020 /* Auto Speed Selection Complete*/
-#define MII_SR_RFD 0x0010 /* Remote Fault Detected */
-#define MII_SR_ANC 0x0008 /* Auto Negotiation capable */
-#define MII_SR_LKS 0x0004 /* Link Status */
-#define MII_SR_JABD 0x0002 /* Jabber Detect */
-#define MII_SR_XC 0x0001 /* Extended Capabilities */
-
-/*
-** MII Management Auto Negotiation Advertisement Register
-*/
-#define MII_ANA_TAF 0x03e0 /* Technology Ability Field */
-#define MII_ANA_T4AM 0x0200 /* T4 Technology Ability Mask */
-#define MII_ANA_TXAM 0x0180 /* TX Technology Ability Mask */
-#define MII_ANA_FDAM 0x0140 /* Full Duplex Technology Ability Mask */
-#define MII_ANA_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */
-#define MII_ANA_100M 0x0380 /* 100Mb Technology Ability Mask */
-#define MII_ANA_10M 0x0060 /* 10Mb Technology Ability Mask */
-#define MII_ANA_CSMA 0x0001 /* CSMA-CD Capable */
-
-/*
-** MII Management Auto Negotiation Remote End Register
-*/
-#define MII_ANLPA_NP 0x8000 /* Next Page (Enable) */
-#define MII_ANLPA_ACK 0x4000 /* Remote Acknowledge */
-#define MII_ANLPA_RF 0x2000 /* Remote Fault */
-#define MII_ANLPA_TAF 0x03e0 /* Technology Ability Field */
-#define MII_ANLPA_T4AM 0x0200 /* T4 Technology Ability Mask */
-#define MII_ANLPA_TXAM 0x0180 /* TX Technology Ability Mask */
-#define MII_ANLPA_FDAM 0x0140 /* Full Duplex Technology Ability Mask */
-#define MII_ANLPA_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */
-#define MII_ANLPA_100M 0x0380 /* 100Mb Technology Ability Mask */
-#define MII_ANLPA_10M 0x0060 /* 10Mb Technology Ability Mask */
-#define MII_ANLPA_CSMA 0x0001 /* CSMA-CD Capable */
-
-/*
-** SROM Media Definitions (ABG SROM Section)
-*/
-#define MEDIA_NWAY 0x0080 /* Nway (Auto Negotiation) on PHY */
-#define MEDIA_MII 0x0040 /* MII Present on the adapter */
-#define MEDIA_FIBRE 0x0008 /* Fibre Media present */
-#define MEDIA_AUI 0x0004 /* AUI Media present */
-#define MEDIA_TP 0x0002 /* TP Media present */
-#define MEDIA_BNC 0x0001 /* BNC Media present */
-
-/*
-** SROM Definitions (Digital Semiconductor Format)
-*/
-#define SROM_SSVID 0x0000 /* Sub-system Vendor ID offset */
-#define SROM_SSID 0x0002 /* Sub-system ID offset */
-#define SROM_CISPL 0x0004 /* CardBus CIS Pointer low offset */
-#define SROM_CISPH 0x0006 /* CardBus CIS Pointer high offset */
-#define SROM_IDCRC 0x0010 /* ID Block CRC offset*/
-#define SROM_RSVD2 0x0011 /* ID Reserved 2 offset */
-#define SROM_SFV 0x0012 /* SROM Format Version offset */
-#define SROM_CCNT 0x0013 /* Controller Count offset */
-#define SROM_HWADD 0x0014 /* Hardware Address offset */
-#define SROM_MRSVD 0x007c /* Manufacturer Reserved offset*/
-#define SROM_CRC 0x007e /* SROM CRC offset */
-
-/*
-** SROM Media Connection Definitions
-*/
-#define SROM_10BT 0x0000 /* 10BASE-T half duplex */
-#define SROM_10BTN 0x0100 /* 10BASE-T with Nway */
-#define SROM_10BTF 0x0204 /* 10BASE-T full duplex */
-#define SROM_10BTNLP 0x0400 /* 10BASE-T without Link Pass test */
-#define SROM_10B2 0x0001 /* 10BASE-2 (BNC) */
-#define SROM_10B5 0x0002 /* 10BASE-5 (AUI) */
-#define SROM_100BTH 0x0003 /* 100BASE-T half duplex */
-#define SROM_100BTF 0x0205 /* 100BASE-T full duplex */
-#define SROM_100BT4 0x0006 /* 100BASE-T4 */
-#define SROM_100BFX 0x0007 /* 100BASE-FX half duplex (Fiber) */
-#define SROM_M10BT 0x0009 /* MII 10BASE-T half duplex */
-#define SROM_M10BTF 0x020a /* MII 10BASE-T full duplex */
-#define SROM_M100BT 0x000d /* MII 100BASE-T half duplex */
-#define SROM_M100BTF 0x020e /* MII 100BASE-T full duplex */
-#define SROM_M100BT4 0x000f /* MII 100BASE-T4 */
-#define SROM_M100BF 0x0010 /* MII 100BASE-FX half duplex */
-#define SROM_M100BFF 0x0211 /* MII 100BASE-FX full duplex */
-#define SROM_PDA 0x0800 /* Powerup & Dynamic Autosense */
-#define SROM_PAO 0x8800 /* Powerup Autosense Only */
-#define SROM_NSMI 0xffff /* No Selected Media Information */
-
-/*
-** SROM Media Definitions
-*/
-#define SROM_10BASET 0x0000 /* 10BASE-T half duplex */
-#define SROM_10BASE2 0x0001 /* 10BASE-2 (BNC) */
-#define SROM_10BASE5 0x0002 /* 10BASE-5 (AUI) */
-#define SROM_100BASET 0x0003 /* 100BASE-T half duplex */
-#define SROM_10BASETF 0x0004 /* 10BASE-T full duplex */
-#define SROM_100BASETF 0x0005 /* 100BASE-T full duplex */
-#define SROM_100BASET4 0x0006 /* 100BASE-T4 */
-#define SROM_100BASEF 0x0007 /* 100BASE-FX half duplex */
-#define SROM_100BASEFF 0x0008 /* 100BASE-FX full duplex */
-
-#define BLOCK_LEN 0x7f /* Extended blocks length mask */
-#define EXT_FIELD 0x40 /* Extended blocks extension field bit */
-#define MEDIA_CODE 0x3f /* Extended blocks media code mask */
-
-/*
-** SROM Compact Format Block Masks
-*/
-#define COMPACT_FI 0x80 /* Format Indicator */
-#define COMPACT_LEN 0x04 /* Length */
-#define COMPACT_MC 0x3f /* Media Code */
-
-/*
-** SROM Extended Format Block Type 0 Masks
-*/
-#define BLOCK0_FI 0x80 /* Format Indicator */
-#define BLOCK0_MCS 0x80 /* Media Code byte Sign */
-#define BLOCK0_MC 0x3f /* Media Code */
-
-/*
-** DC21040 Full Duplex Register (DE4X5_FDR)
-*/
-#define FDR_FDACV 0x0000ffff /* Full Duplex Auto Configuration Value */
-
-/*
-** DC21041 General Purpose Timer Register (DE4X5_GPT)
-*/
-#define GPT_CON 0x00010000 /* One shot: 0, Continuous: 1 */
-#define GPT_VAL 0x0000ffff /* Timer Value */
-
-/*
-** DC21140 General Purpose Register (DE4X5_GEP) (hardware dependent bits)
-*/
-/* Valid ONLY for DE500 hardware */
-#define GEP_LNP 0x00000080 /* Link Pass (input) */
-#define GEP_SLNK 0x00000040 /* SYM LINK (input) */
-#define GEP_SDET 0x00000020 /* Signal Detect (input) */
-#define GEP_HRST 0x00000010 /* Hard RESET (to PHY) (output) */
-#define GEP_FDXD 0x00000008 /* Full Duplex Disable (output) */
-#define GEP_PHYL 0x00000004 /* PHY Loopback (output) */
-#define GEP_FLED 0x00000002 /* Force Activity LED on (output) */
-#define GEP_MODE 0x00000001 /* 0: 10Mb/s, 1: 100Mb/s */
-#define GEP_INIT 0x0000011f /* Setup inputs (0) and outputs (1) */
-#define GEP_CTRL 0x00000100 /* GEP control bit */
-
-/*
-** SIA Register Defaults
-*/
-#define CSR13 0x00000001
-#define CSR14 0x0003ff7f /* Autonegotiation disabled */
-#define CSR15 0x00000008
-
-/*
-** SIA Status Register (DE4X5_SISR)
-*/
-#define SISR_LPC 0xffff0000 /* Link Partner's Code Word */
-#define SISR_LPN 0x00008000 /* Link Partner Negotiable */
-#define SISR_ANS 0x00007000 /* Auto Negotiation Arbitration State */
-#define SISR_NSN 0x00000800 /* Non Stable NLPs Detected (DC21041) */
-#define SISR_TRF 0x00000800 /* Transmit Remote Fault */
-#define SISR_NSND 0x00000400 /* Non Stable NLPs Detected (DC21142) */
-#define SISR_ANR_FDS 0x00000400 /* Auto Negotiate Restart/Full Duplex Sel.*/
-#define SISR_TRA 0x00000200 /* 10BASE-T Receive Port Activity */
-#define SISR_NRA 0x00000200 /* Non Selected Port Receive Activity */
-#define SISR_ARA 0x00000100 /* AUI Receive Port Activity */
-#define SISR_SRA 0x00000100 /* Selected Port Receive Activity */
-#define SISR_DAO 0x00000080 /* PLL All One */
-#define SISR_DAZ 0x00000040 /* PLL All Zero */
-#define SISR_DSP 0x00000020 /* PLL Self-Test Pass */
-#define SISR_DSD 0x00000010 /* PLL Self-Test Done */
-#define SISR_APS 0x00000008 /* Auto Polarity State */
-#define SISR_LKF 0x00000004 /* Link Fail Status */
-#define SISR_LS10 0x00000004 /* 10Mb/s Link Fail Status */
-#define SISR_NCR 0x00000002 /* Network Connection Error */
-#define SISR_LS100 0x00000002 /* 100Mb/s Link Fail Status */
-#define SISR_PAUI 0x00000001 /* AUI_TP Indication */
-#define SISR_MRA 0x00000001 /* MII Receive Port Activity */
-
-#define ANS_NDIS 0x00000000 /* Nway disable */
-#define ANS_TDIS 0x00001000 /* Transmit Disable */
-#define ANS_ADET 0x00002000 /* Ability Detect */
-#define ANS_ACK 0x00003000 /* Acknowledge */
-#define ANS_CACK 0x00004000 /* Complete Acknowledge */
-#define ANS_NWOK 0x00005000 /* Nway OK - FLP Link Good */
-#define ANS_LCHK 0x00006000 /* Link Check */
-
-#define SISR_RST 0x00000301 /* CSR12 reset */
-#define SISR_ANR 0x00001301 /* Autonegotiation restart */
-
-/*
-** SIA Connectivity Register (DE4X5_SICR)
-*/
-#define SICR_SDM 0xffff0000 /* SIA Diagnostics Mode */
-#define SICR_OE57 0x00008000 /* Output Enable 5 6 7 */
-#define SICR_OE24 0x00004000 /* Output Enable 2 4 */
-#define SICR_OE13 0x00002000 /* Output Enable 1 3 */
-#define SICR_IE 0x00001000 /* Input Enable */
-#define SICR_EXT 0x00000000 /* SIA MUX Select External SIA Mode */
-#define SICR_D_SIA 0x00000400 /* SIA MUX Select Diagnostics - SIA Sigs */
-#define SICR_DPLL 0x00000800 /* SIA MUX Select Diagnostics - DPLL Sigs*/
-#define SICR_APLL 0x00000a00 /* SIA MUX Select Diagnostics - DPLL Sigs*/
-#define SICR_D_RxM 0x00000c00 /* SIA MUX Select Diagnostics - RxM Sigs */
-#define SICR_M_RxM 0x00000d00 /* SIA MUX Select Diagnostics - RxM Sigs */
-#define SICR_LNKT 0x00000e00 /* SIA MUX Select Diagnostics - Link Test*/
-#define SICR_SEL 0x00000f00 /* SIA MUX Select AUI or TP with LEDs */
-#define SICR_ASE 0x00000080 /* APLL Start Enable*/
-#define SICR_SIM 0x00000040 /* Serial Interface Input Multiplexer */
-#define SICR_ENI 0x00000020 /* Encoder Input Multiplexer */
-#define SICR_EDP 0x00000010 /* SIA PLL External Input Enable */
-#define SICR_AUI 0x00000008 /* 10Base-T (0) or AUI (1) */
-#define SICR_CAC 0x00000004 /* CSR Auto Configuration */
-#define SICR_PS 0x00000002 /* Pin AUI/TP Selection */
-#define SICR_SRL 0x00000001 /* SIA Reset */
-#define SIA_RESET 0x00000000 /* SIA Reset Value */
-
-/*
-** SIA Transmit and Receive Register (DE4X5_STRR)
-*/
-#define STRR_TAS 0x00008000 /* 10Base-T/AUI Autosensing Enable */
-#define STRR_SPP 0x00004000 /* Set Polarity Plus */
-#define STRR_APE 0x00002000 /* Auto Polarity Enable */
-#define STRR_LTE 0x00001000 /* Link Test Enable */
-#define STRR_SQE 0x00000800 /* Signal Quality Enable */
-#define STRR_CLD 0x00000400 /* Collision Detect Enable */
-#define STRR_CSQ 0x00000200 /* Collision Squelch Enable */
-#define STRR_RSQ 0x00000100 /* Receive Squelch Enable */
-#define STRR_ANE 0x00000080 /* Auto Negotiate Enable */
-#define STRR_HDE 0x00000040 /* Half Duplex Enable */
-#define STRR_CPEN 0x00000030 /* Compensation Enable */
-#define STRR_LSE 0x00000008 /* Link Pulse Send Enable */
-#define STRR_DREN 0x00000004 /* Driver Enable */
-#define STRR_LBK 0x00000002 /* Loopback Enable */
-#define STRR_ECEN 0x00000001 /* Encoder Enable */
-#define STRR_RESET 0xffffffff /* Reset value for STRR */
-
-/*
-** SIA General Register (DE4X5_SIGR)
-*/
-#define SIGR_RMI 0x40000000 /* Receive Match Interrupt */
-#define SIGR_GI1 0x20000000 /* General Port Interrupt 1 */
-#define SIGR_GI0 0x10000000 /* General Port Interrupt 0 */
-#define SIGR_CWE 0x08000000 /* Control Write Enable */
-#define SIGR_RME 0x04000000 /* Receive Match Enable */
-#define SIGR_GEI1 0x02000000 /* GEP Interrupt Enable on Port 1 */
-#define SIGR_GEI0 0x01000000 /* GEP Interrupt Enable on Port 0 */
-#define SIGR_LGS3 0x00800000 /* LED/GEP3 Select */
-#define SIGR_LGS2 0x00400000 /* LED/GEP2 Select */
-#define SIGR_LGS1 0x00200000 /* LED/GEP1 Select */
-#define SIGR_LGS0 0x00100000 /* LED/GEP0 Select */
-#define SIGR_MD 0x000f0000 /* General Purpose Mode and Data */
-#define SIGR_LV2 0x00008000 /* General Purpose LED2 value */
-#define SIGR_LE2 0x00004000 /* General Purpose LED2 enable */
-#define SIGR_FRL 0x00002000 /* Force Receiver Low */
-#define SIGR_DPST 0x00001000 /* PLL Self Test Start */
-#define SIGR_LSD 0x00000800 /* LED Stretch Disable */
-#define SIGR_FLF 0x00000400 /* Force Link Fail */
-#define SIGR_FUSQ 0x00000200 /* Force Unsquelch */
-#define SIGR_TSCK 0x00000100 /* Test Clock */
-#define SIGR_LV1 0x00000080 /* General Purpose LED1 value */
-#define SIGR_LE1 0x00000040 /* General Purpose LED1 enable */
-#define SIGR_RWR 0x00000020 /* Receive Watchdog Release */
-#define SIGR_RWD 0x00000010 /* Receive Watchdog Disable */
-#define SIGR_ABM 0x00000008 /* BNC: 0, AUI:1 */
-#define SIGR_JCK 0x00000004 /* Jabber Clock */
-#define SIGR_HUJ 0x00000002 /* Host Unjab */
-#define SIGR_JBD 0x00000001 /* Jabber Disable */
-#define SIGR_RESET 0xffff0000 /* Reset value for SIGR */
-
-/*
-** Receive Descriptor Bit Summary
-*/
-#define R_OWN 0x80000000 /* Own Bit */
-#define RD_FF 0x40000000 /* Filtering Fail */
-#define RD_FL 0x3fff0000 /* Frame Length */
-#define RD_ES 0x00008000 /* Error Summary */
-#define RD_LE 0x00004000 /* Length Error */
-#define RD_DT 0x00003000 /* Data Type */
-#define RD_RF 0x00000800 /* Runt Frame */
-#define RD_MF 0x00000400 /* Multicast Frame */
-#define RD_FS 0x00000200 /* First Descriptor */
-#define RD_LS 0x00000100 /* Last Descriptor */
-#define RD_TL 0x00000080 /* Frame Too Long */
-#define RD_CS 0x00000040 /* Collision Seen */
-#define RD_FT 0x00000020 /* Frame Type */
-#define RD_RJ 0x00000010 /* Receive Watchdog */
-#define RD_RE 0x00000008 /* Report on MII Error */
-#define RD_DB 0x00000004 /* Dribbling Bit */
-#define RD_CE 0x00000002 /* CRC Error */
-#define RD_OF 0x00000001 /* Overflow */
-
-#define RD_RER 0x02000000 /* Receive End Of Ring */
-#define RD_RCH 0x01000000 /* Second Address Chained */
-#define RD_RBS2 0x003ff800 /* Buffer 2 Size */
-#define RD_RBS1 0x000007ff /* Buffer 1 Size */
-
-/*
-** Transmit Descriptor Bit Summary
-*/
-#define T_OWN 0x80000000 /* Own Bit */
-#define TD_ES 0x00008000 /* Error Summary */
-#define TD_TO 0x00004000 /* Transmit Jabber Time-Out */
-#define TD_LO 0x00000800 /* Loss Of Carrier */
-#define TD_NC 0x00000400 /* No Carrier */
-#define TD_LC 0x00000200 /* Late Collision */
-#define TD_EC 0x00000100 /* Excessive Collisions */
-#define TD_HF 0x00000080 /* Heartbeat Fail */
-#define TD_CC 0x00000078 /* Collision Counter */
-#define TD_LF 0x00000004 /* Link Fail */
-#define TD_UF 0x00000002 /* Underflow Error */
-#define TD_DE 0x00000001 /* Deferred */
-
-#define TD_IC 0x80000000 /* Interrupt On Completion */
-#define TD_LS 0x40000000 /* Last Segment */
-#define TD_FS 0x20000000 /* First Segment */
-#define TD_FT1 0x10000000 /* Filtering Type */
-#define TD_SET 0x08000000 /* Setup Packet */
-#define TD_AC 0x04000000 /* Add CRC Disable */
-#define TD_TER 0x02000000 /* Transmit End Of Ring */
-#define TD_TCH 0x01000000 /* Second Address Chained */
-#define TD_DPD 0x00800000 /* Disabled Padding */
-#define TD_FT0 0x00400000 /* Filtering Type */
-#define TD_TBS2 0x003ff800 /* Buffer 2 Size */
-#define TD_TBS1 0x000007ff /* Buffer 1 Size */
-
-#define PERFECT_F 0x00000000
-#define HASH_F TD_FT0
-#define INVERSE_F TD_FT1
-#define HASH_O_F (TD_FT1 | TD_F0)
-
-/*
-** Media / mode state machine definitions
-** User selectable:
-*/
-#define TP 0x0040 /* 10Base-T (now equiv to _10Mb) */
-#define TP_NW 0x0002 /* 10Base-T with Nway */
-#define BNC 0x0004 /* Thinwire */
-#define AUI 0x0008 /* Thickwire */
-#define BNC_AUI 0x0010 /* BNC/AUI on DC21040 indistinguishable */
-#define _10Mb 0x0040 /* 10Mb/s Ethernet */
-#define _100Mb 0x0080 /* 100Mb/s Ethernet */
-#define AUTO 0x4000 /* Auto sense the media or speed */
-
-/*
-** Internal states
-*/
-#define NC 0x0000 /* No Connection */
-#define ANS 0x0020 /* Intermediate AutoNegotiation State */
-#define SPD_DET 0x0100 /* Parallel speed detection */
-#define INIT 0x0200 /* Initial state */
-#define EXT_SIA 0x0400 /* External SIA for motherboard chip */
-#define ANS_SUSPECT 0x0802 /* Suspect the ANS (TP) port is down */
-#define TP_SUSPECT 0x0803 /* Suspect the TP port is down */
-#define BNC_AUI_SUSPECT 0x0804 /* Suspect the BNC or AUI port is down */
-#define EXT_SIA_SUSPECT 0x0805 /* Suspect the EXT SIA port is down */
-#define BNC_SUSPECT 0x0806 /* Suspect the BNC port is down */
-#define AUI_SUSPECT 0x0807 /* Suspect the AUI port is down */
-#define MII 0x1000 /* MII on the 21143 */
-
-#define TIMER_CB 0x80000000 /* Timer callback detection */
-
-/*
-** DE4X5 DEBUG Options
-*/
-#define DEBUG_NONE 0x0000 /* No DEBUG messages */
-#define DEBUG_VERSION 0x0001 /* Print version message */
-#define DEBUG_MEDIA 0x0002 /* Print media messages */
-#define DEBUG_TX 0x0004 /* Print TX (queue_pkt) messages */
-#define DEBUG_RX 0x0008 /* Print RX (de4x5_rx) messages */
-#define DEBUG_SROM 0x0010 /* Print SROM messages */
-#define DEBUG_MII 0x0020 /* Print MII messages */
-#define DEBUG_OPEN 0x0040 /* Print de4x5_open() messages */
-#define DEBUG_CLOSE 0x0080 /* Print de4x5_close() messages */
-#define DEBUG_PCICFG 0x0100
-#define DEBUG_ALL 0x01ff
-
-/*
-** Miscellaneous
-*/
-#define PCI 0
-#define EISA 1
-
-#define DE4X5_HASH_TABLE_LEN 512 /* Bits */
-#define DE4X5_HASH_BITS 0x01ff /* 9 LS bits */
-
-#define SETUP_FRAME_LEN 192 /* Bytes */
-#define IMPERF_PA_OFFSET 156 /* Bytes */
-
-#define POLL_DEMAND 1
-
-#define LOST_MEDIA_THRESHOLD 3
-
-#define MASK_INTERRUPTS 1
-#define UNMASK_INTERRUPTS 0
-
-#define DE4X5_STRLEN 8
-
-#define DE4X5_INIT 0 /* Initialisation time */
-#define DE4X5_RUN 1 /* Run time */
-
-#define DE4X5_SAVE_STATE 0
-#define DE4X5_RESTORE_STATE 1
-
-/*
-** Address Filtering Modes
-*/
-#define PERFECT 0 /* 16 perfect physical addresses */
-#define HASH_PERF 1 /* 1 perfect, 512 multicast addresses */
-#define PERFECT_REJ 2 /* Reject 16 perfect physical addresses */
-#define ALL_HASH 3 /* Hashes all physical & multicast addrs */
-
-#define ALL 0 /* Clear out all the setup frame */
-#define PHYS_ADDR_ONLY 1 /* Update the physical address only */
-
-/*
-** Adapter state
-*/
-#define INITIALISED 0 /* After h/w initialised and mem alloc'd */
-#define CLOSED 1 /* Ready for opening */
-#define OPEN 2 /* Running */
-
-/*
-** Various wait times
-*/
-#define PDET_LINK_WAIT 1200 /* msecs to wait for link detect bits */
-#define ANS_FINISH_WAIT 1000 /* msecs to wait for link detect bits */
-
-/*
-** IEEE OUIs for various PHY vendor/chip combos - Reg 2 values only. Since
-** the vendors seem split 50-50 on how to calculate the OUI register values
-** anyway, just reading Reg2 seems reasonable for now [see de4x5_get_oui()].
-*/
-#define NATIONAL_TX 0x2000
-#define BROADCOM_T4 0x03e0
-#define SEEQ_T4 0x0016
-#define CYPRESS_T4 0x0014
-
-/*
-** Speed Selection stuff
-*/
-#define SET_10Mb {\
- if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
- omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\
- if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\
- mii_wr(MII_CR_10|(lp->fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
- }\
- omr |= ((lp->fdx ? OMR_FDX : 0) | OMR_TTM);\
- outl(omr, DE4X5_OMR);\
- if (!lp->useSROM) lp->cache.gep = 0;\
- } else if (lp->useSROM && !lp->useMII) {\
- omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
- omr |= (lp->fdx ? OMR_FDX : 0);\
- outl(omr | (lp->infoblock_csr6 & ~(OMR_SCR | OMR_HBD)), DE4X5_OMR);\
- } else {\
- omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
- omr |= (lp->fdx ? OMR_FDX : 0);\
- outl(omr | OMR_SDP | OMR_TTM, DE4X5_OMR);\
- lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD);\
- gep_wr(lp->cache.gep, dev);\
- }\
-}
-
-#define SET_100Mb {\
- if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
- int fdx=0;\
- if (lp->phy[lp->active].id == NATIONAL_TX) {\
- mii_wr(mii_rd(0x18, lp->phy[lp->active].addr, DE4X5_MII) & ~0x2000,\
- 0x18, lp->phy[lp->active].addr, DE4X5_MII);\
- }\
- omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\
- sr = mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);\
- if (!(sr & MII_ANA_T4AM) && lp->fdx) fdx=1;\
- if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\
- mii_wr(MII_CR_100|(fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
- }\
- if (fdx) omr |= OMR_FDX;\
- outl(omr, DE4X5_OMR);\
- if (!lp->useSROM) lp->cache.gep = 0;\
- } else if (lp->useSROM && !lp->useMII) {\
- omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
- omr |= (lp->fdx ? OMR_FDX : 0);\
- outl(omr | lp->infoblock_csr6, DE4X5_OMR);\
- } else {\
- omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
- omr |= (lp->fdx ? OMR_FDX : 0);\
- outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS | OMR_SCR, DE4X5_OMR);\
- lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD) | GEP_MODE;\
- gep_wr(lp->cache.gep, dev);\
- }\
-}
-
-/* FIX ME so I don't jam 10Mb networks */
-#define SET_100Mb_PDET {\
- if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
- mii_wr(MII_CR_100|MII_CR_ASSE, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
- omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
- outl(omr, DE4X5_OMR);\
- } else if (lp->useSROM && !lp->useMII) {\
- omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
- outl(omr, DE4X5_OMR);\
- } else {\
- omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
- outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS, DE4X5_OMR);\
- lp->cache.gep = (GEP_FDXD | GEP_MODE);\
- gep_wr(lp->cache.gep, dev);\
- }\
-}
-
-/*
-** Include the IOCTL stuff
-*/
-#include <linux/sockios.h>
-
-struct de4x5_ioctl {
- unsigned short cmd; /* Command to run */
- unsigned short len; /* Length of the data buffer */
- unsigned char __user *data; /* Pointer to the data buffer */
-};
-
-/*
-** Recognised commands for the driver
-*/
-#define DE4X5_GET_HWADDR 0x01 /* Get the hardware address */
-#define DE4X5_SET_HWADDR 0x02 /* Set the hardware address */
-/* 0x03 and 0x04 were used before and are obsoleted now. Don't use them. */
-#define DE4X5_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */
-#define DE4X5_GET_MCA 0x06 /* Get a multicast address */
-#define DE4X5_SET_MCA 0x07 /* Set a multicast address */
-#define DE4X5_CLR_MCA 0x08 /* Clear a multicast address */
-#define DE4X5_MCA_EN 0x09 /* Enable a multicast address group */
-#define DE4X5_GET_STATS 0x0a /* Get the driver statistics */
-#define DE4X5_CLR_STATS 0x0b /* Zero out the driver statistics */
-#define DE4X5_GET_OMR 0x0c /* Get the OMR Register contents */
-#define DE4X5_SET_OMR 0x0d /* Set the OMR Register contents */
-#define DE4X5_GET_REG 0x0e /* Get the DE4X5 Registers */
-
-#define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32(dev->dev_addr) & 0x00ffffff) == 0x3e0008)
--
2.34.3
More information about the Linuxppc-dev
mailing list