[PATCH] powerpc/boot: Build wrapper for an appropriate CPU

Christophe Leroy christophe.leroy at csgroup.eu
Wed Mar 30 22:33:29 AEDT 2022



Le 30/03/2022 à 13:24, Joel Stanley a écrit :
> Currently the boot wrapper lacks a -mcpu option, so it will be built for
> the toolchain's default cpu. This is a problem if the toolchain defaults
> to a cpu with newer instructions.
> 
> We could wire in TARGET_CPU but instead use the oldest supported option
> so the wrapper runs anywhere.
> 
> The GCC documentation stays that -mcpu=powerpc64le will give us a
> generic 64 bit powerpc machine:
> 
>   -mcpu=powerpc, -mcpu=powerpc64, and -mcpu=powerpc64le specify pure
>   32-bit PowerPC (either endian), 64-bit big endian PowerPC and 64-bit
>   little endian PowerPC architecture machine types, with an appropriate,
>   generic processor model assumed for scheduling purposes.
> 
> So do that for each of the three machines.
> 
> This bug was found when building the kernel with a toolchain that
> defaulted to powre10, resulting in a pcrel enabled wrapper which fails
> to link:
> 
>   arch/powerpc/boot/wrapper.a(crt0.o): in function `p_base':
>   (.text+0x150): call to `platform_init' lacks nop, can't restore toc; (toc save/adjust stub)
>   (.text+0x154): call to `start' lacks nop, can't restore toc; (toc save/adjust stub)
>   powerpc64le-buildroot-linux-gnu-ld: final link failed: bad value
> 
> Even with tha bug worked around the resulting kernel would crash on a
> power9 box:
> 
>   $ qemu-system-ppc64 -nographic -nodefaults -M powernv9 -kernel arch/powerpc/boot/zImage.epapr -serial mon:stdio
>   [    7.069331356,5] INIT: Starting kernel at 0x20010020, fdt at 0x3068c628 25694 bytes
>   [    7.130374661,3] ***********************************************
>   [    7.131072886,3] Fatal Exception 0xe40 at 00000000200101e4    MSR 9000000000000001
>   [    7.131290613,3] CFAR : 000000002001027c MSR  : 9000000000000001
>   [    7.131433759,3] SRR0 : 0000000020010050 SRR1 : 9000000000000001
>   [    7.131577775,3] HSRR0: 00000000200101e4 HSRR1: 9000000000000001
>   [    7.131733687,3] DSISR: 00000000         DAR  : 0000000000000000
>   [    7.131905162,3] LR   : 0000000020010280 CTR  : 0000000000000000
>   [    7.132068356,3] CR   : 44002004         XER  : 00000000
> 
> Link: https://github.com/linuxppc/issues/issues/400
> Signed-off-by: Joel Stanley <joel at jms.id.au>
> ---
> Tested:
> 
>   - ppc64le_defconfig
>   - pseries and powernv qemu, for power8, power9, power10 cpus
>   - buildroot compiler that defaults to -mcpu=power10 (gcc 10.3.0, ld 2.36.1)
>   -  RHEL9 cross compilers (gcc 11.2.1-1, ld 2.35.2-17.el9)
> 
> All decompressed and made it into the kernel ok.
> 
> ppc64_defconfig did not work, as we've got a regression when the wrapper
> is built for big endian. It hasn't worked for zImage.pseries for a long
> time (at least v4.14), and broke some time between v5.4 and v5.17 for
> zImage.epapr.
> 
>   arch/powerpc/boot/Makefile | 8 ++++++--
>   1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
> index 9993c6256ad2..1f5cc401bfc0 100644
> --- a/arch/powerpc/boot/Makefile
> +++ b/arch/powerpc/boot/Makefile
> @@ -38,9 +38,13 @@ BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
>   		 $(LINUXINCLUDE)
>   
>   ifdef CONFIG_PPC64_BOOT_WRAPPER
> -BOOTCFLAGS	+= -m64
> +ifdef CONFIG_CPU_LITTLE_ENDIAN
> +BOOTCFLAGS	+= -m64 -mcpu=powerpc64le
>   else
> -BOOTCFLAGS	+= -m32
> +BOOTCFLAGS	+= -m64 -mcpu=powerpc64
> +endif
> +else
> +BOOTCFLAGS	+= -m32 -mcpu=powerpc

How does that interracts with the following lines ? Isn't it an issue to 
have two -mcpu ?

arch/powerpc/boot/Makefile:$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
arch/powerpc/boot/Makefile:$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
arch/powerpc/boot/Makefile:$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
arch/powerpc/boot/Makefile:$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
arch/powerpc/boot/Makefile:$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
arch/powerpc/boot/Makefile:$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
arch/powerpc/boot/Makefile:$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
arch/powerpc/boot/Makefile:$(obj)/treeboot-currituck.o: BOOTCFLAGS += 
-mcpu=405
arch/powerpc/boot/Makefile:$(obj)/treeboot-akebono.o: BOOTCFLAGS += 
-mcpu=405


>   endif
>   
>   BOOTCFLAGS	+= -isystem $(shell $(BOOTCC) -print-file-name=include)


More information about the Linuxppc-dev mailing list