[PATCH 16/22] dvb-usb: Replace comments with C99 initializers

Mauro Carvalho Chehab mchehab at kernel.org
Sun Mar 27 05:24:54 AEDT 2022


Em Sat, 26 Mar 2022 17:59:03 +0100
Benjamin Stürz <benni at stuerz.xyz> escreveu:

> This replaces comments with C99's designated
> initializers because the kernel supports them now.
> 
> Signed-off-by: Benjamin Stürz <benni at stuerz.xyz>
> ---
>  drivers/media/usb/dvb-usb/dibusb-mb.c | 62 +++++++++++++--------------
>  drivers/media/usb/dvb-usb/dibusb-mc.c | 34 +++++++--------
>  2 files changed, 48 insertions(+), 48 deletions(-)
> 
> diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c
> index e9dc27f73970..f188e07f518b 100644
> --- a/drivers/media/usb/dvb-usb/dibusb-mb.c
> +++ b/drivers/media/usb/dvb-usb/dibusb-mb.c
> @@ -122,40 +122,40 @@ static int dibusb_probe(struct usb_interface *intf,
>  
>  /* do not change the order of the ID table */
>  static struct usb_device_id dibusb_dib3000mb_table [] = {
> -/* 00 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
> -/* 01 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },
> -/* 02 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_COLD) },
> -/* 03 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_WARM) },
> -/* 04 */	{ USB_DEVICE(USB_VID_COMPRO_UNK,	USB_PID_COMPRO_DVBU2000_UNK_COLD) },
> -/* 05 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_COLD) },
> -/* 06 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_WARM) },
> -/* 07 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_COLD) },
> -/* 08 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_WARM) },
> -/* 09 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_COLD) },
> -/* 10 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_WARM) },
> -/* 11 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_COLD) },
> -/* 12 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_WARM) },
> -/* 13 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_COLD) },
> -/* 14 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_WARM) },
> -/* 15 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_COLD) },
> -/* 16 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_WARM) },
> -/* 17 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_COLD) },
> -/* 18 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_WARM) },
> -/* 19 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_COLD) },
> -/* 20 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_WARM) },
> -/* 21 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
> -/* 22 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
> -/* 23 */	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_COLD) },
> +[0]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
> +[1]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },

While here, please properly indent this table, and respect the 80-columns limit,
e. g.:

static struct usb_device_id dibusb_dib3000mb_table [] = {
	[0] = { USB_DEVICE(USB_VID_WIDEVIEW 
			   USB_PID_AVERMEDIA_DVBT_USB_COLD) 
	},
	[1]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,
			     USB_PID_AVERMEDIA_DVBT_USB_WARM)
	},
	...

	
Regards,
Mauro

> +[2]  =	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_COLD) },
> +[3]  =	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_WARM) },
> +[4]  =	{ USB_DEVICE(USB_VID_COMPRO_UNK,	USB_PID_COMPRO_DVBU2000_UNK_COLD) },
> +[5]  =	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_COLD) },
> +[6]  =	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_WARM) },
> +[7]  =	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_COLD) },
> +[8]  =	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_WARM) },
> +[9]  =	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_COLD) },
> +[10] =	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_WARM) },
> +[11] =	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_COLD) },
> +[12] =	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_WARM) },
> +[13] =	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_COLD) },
> +[14] =	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_WARM) },
> +[15] =	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_COLD) },
> +[16] =	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_WARM) },
> +[17] =	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_COLD) },
> +[18] =	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_WARM) },
> +[19] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_COLD) },
> +[20] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_WARM) },
> +[21] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
> +[22] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
> +[23] =	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_COLD) },
>  
>  /* device ID with default DIBUSB2_0-firmware and with the hacked firmware */
> -/* 24 */	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_WARM) },
> -/* 25 */	{ USB_DEVICE(USB_VID_KYE,		USB_PID_KYE_DVB_T_COLD) },
> -/* 26 */	{ USB_DEVICE(USB_VID_KYE,		USB_PID_KYE_DVB_T_WARM) },
> +[24] =	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_WARM) },
> +[25] =	{ USB_DEVICE(USB_VID_KYE,		USB_PID_KYE_DVB_T_COLD) },
> +[26] =	{ USB_DEVICE(USB_VID_KYE,		USB_PID_KYE_DVB_T_WARM) },
>  
> -/* 27 */	{ USB_DEVICE(USB_VID_KWORLD,		USB_PID_KWORLD_VSTREAM_COLD) },
> +[27] =	{ USB_DEVICE(USB_VID_KWORLD,		USB_PID_KWORLD_VSTREAM_COLD) },
>  
> -/* 28 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_COLD) },
> -/* 29 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_WARM) },
> +[28] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_COLD) },
> +[29] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_WARM) },
>  
>  /*
>   * XXX: As Artec just 'forgot' to program the EEPROM on some Artec T1 devices
> @@ -166,7 +166,7 @@ static struct usb_device_id dibusb_dib3000mb_table [] = {
>   */
>  
>  #ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY
> -/* 30 */	{ USB_DEVICE(USB_VID_ANCHOR,		USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) },
> +[30] =	{ USB_DEVICE(USB_VID_ANCHOR,		USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) },
>  #endif
>  
>  			{ }		/* Terminating entry */
> diff --git a/drivers/media/usb/dvb-usb/dibusb-mc.c b/drivers/media/usb/dvb-usb/dibusb-mc.c
> index e2689977c8c8..48760470e821 100644
> --- a/drivers/media/usb/dvb-usb/dibusb-mc.c
> +++ b/drivers/media/usb/dvb-usb/dibusb-mc.c
> @@ -25,23 +25,23 @@ static int dibusb_mc_probe(struct usb_interface *intf,
>  
>  /* do not change the order of the ID table */
>  static struct usb_device_id dibusb_dib3000mc_table [] = {
> -/* 00 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3001_COLD) },
> -/* 01 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3001_WARM) },
> -/* 02 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_COLD) },
> -/* 03 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_WARM) }, // ( ? )
> -/* 04 */	{ USB_DEVICE(USB_VID_LITEON,		USB_PID_LITEON_DVB_T_COLD) },
> -/* 05 */	{ USB_DEVICE(USB_VID_LITEON,		USB_PID_LITEON_DVB_T_WARM) },
> -/* 06 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_DIGIVOX_MINI_SL_COLD) },
> -/* 07 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_DIGIVOX_MINI_SL_WARM) },
> -/* 08 */	{ USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB2_COLD) },
> -/* 09 */	{ USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB2_WARM) },
> -/* 10 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ARTEC_T14_COLD) },
> -/* 11 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ARTEC_T14_WARM) },
> -/* 12 */	{ USB_DEVICE(USB_VID_LEADTEK,		USB_PID_WINFAST_DTV_DONGLE_COLD) },
> -/* 13 */	{ USB_DEVICE(USB_VID_LEADTEK,		USB_PID_WINFAST_DTV_DONGLE_WARM) },
> -/* 14 */	{ USB_DEVICE(USB_VID_HUMAX_COEX,	USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD) },
> -/* 15 */	{ USB_DEVICE(USB_VID_HUMAX_COEX,	USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM) },
> -			{ }		/* Terminating entry */
> +	[0]  =	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3001_COLD) },
> +	[1]  =	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3001_WARM) },
> +	[2]  =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_COLD) },
> +	[3]  =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_USB2_WARM) }, // ( ? )
> +	[4]  =	{ USB_DEVICE(USB_VID_LITEON,		USB_PID_LITEON_DVB_T_COLD) },
> +	[5]  =	{ USB_DEVICE(USB_VID_LITEON,		USB_PID_LITEON_DVB_T_WARM) },
> +	[6]  =	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_DIGIVOX_MINI_SL_COLD) },
> +	[7]  =	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_DIGIVOX_MINI_SL_WARM) },
> +	[8]  =	{ USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB2_COLD) },
> +	[9]  =	{ USB_DEVICE(USB_VID_GRANDTEC,          USB_PID_GRANDTEC_DVBT_USB2_WARM) },
> +	[10] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ARTEC_T14_COLD) },
> +	[11] =	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ARTEC_T14_WARM) },
> +	[12] =	{ USB_DEVICE(USB_VID_LEADTEK,		USB_PID_WINFAST_DTV_DONGLE_COLD) },
> +	[13] =	{ USB_DEVICE(USB_VID_LEADTEK,		USB_PID_WINFAST_DTV_DONGLE_WARM) },
> +	[14] =	{ USB_DEVICE(USB_VID_HUMAX_COEX,	USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD) },
> +	[15] =	{ USB_DEVICE(USB_VID_HUMAX_COEX,	USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM) },
> +			   { }		/* Terminating entry */
>  };
>  MODULE_DEVICE_TABLE (usb, dibusb_dib3000mc_table);
>  



Thanks,
Mauro


More information about the Linuxppc-dev mailing list