[PATCH] macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled

[Christophe Leroy]

Le 21/03/2022 à 05:30, Finn Thain a écrit :
> drivers/macintosh/via-pmu-event.o: In function `via_pmu_event':
> via-pmu-event.c:(.text+0x44): undefined reference to `input_event'
> via-pmu-event.c:(.text+0x68): undefined reference to `input_event'
> via-pmu-event.c:(.text+0x94): undefined reference to `input_event'
> via-pmu-event.c:(.text+0xb8): undefined reference to `input_event'
> drivers/macintosh/via-pmu-event.o: In function `via_pmu_event_init':
> via-pmu-event.c:(.init.text+0x20): undefined reference to `input_allocate_device'
> via-pmu-event.c:(.init.text+0xc4): undefined reference to `input_register_device'
> via-pmu-event.c:(.init.text+0xd4): undefined reference to `input_free_device'
> make[1]: *** [Makefile:1155: vmlinux] Error 1
> make: *** [Makefile:350: __build_one_by_one] Error 2
> 
> Don't call into the input subsystem unless CONFIG_INPUT is built-in.
> 
> Reported-by: kernel test robot <lkp at intel.com>
> Cc: Michael Ellerman <mpe at ellerman.id.au>
> Cc: Geert Uytterhoeven <geert at linux-m68k.org>
> Cc: Randy Dunlap <rdunlap at infradead.org>
> Signed-off-by: Finn Thain <fthain at linux-m68k.org>
> ---
> This is equivalent to the patch I sent a couple of days ago. This one
> is slightly longer and adds a new symbol so that Kconfig logic can been
> used instead of Makefile logic in case reviewers prefer that.
> ---
>   drivers/macintosh/Kconfig   | 5 +++++
>   drivers/macintosh/Makefile  | 3 ++-
>   drivers/macintosh/via-pmu.c | 2 ++
>   3 files changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
> index 5cdc361da37c..b9102f051bbb 100644
> --- a/drivers/macintosh/Kconfig
> +++ b/drivers/macintosh/Kconfig
> @@ -67,6 +67,11 @@ config ADB_PMU
>   	  this device; you should do so if your machine is one of those
>   	  mentioned above.
>   
> +config ADB_PMU_EVENT
> +	bool
> +	depends on ADB_PMU && INPUT=y
> +	default y

Could be reduced to

config ADB_PMU_EVENT
	def_bool y if ADB_PMU && INPUT=y

> +
>   config ADB_PMU_LED
>   	bool "Support for the Power/iBook front LED"
>   	depends on PPC_PMAC && ADB_PMU
> diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
> index 49819b1b6f20..712edcb3e0b0 100644
> --- a/drivers/macintosh/Makefile
> +++ b/drivers/macintosh/Makefile
> @@ -12,7 +12,8 @@ obj-$(CONFIG_MAC_EMUMOUSEBTN)	+= mac_hid.o
>   obj-$(CONFIG_INPUT_ADBHID)	+= adbhid.o
>   obj-$(CONFIG_ANSLCD)		+= ans-lcd.o
>   
> -obj-$(CONFIG_ADB_PMU)		+= via-pmu.o via-pmu-event.o
> +obj-$(CONFIG_ADB_PMU)		+= via-pmu.o
> +obj-$(CONFIG_ADB_PMU_EVENT)	+= via-pmu-event.o
>   obj-$(CONFIG_ADB_PMU_LED)	+= via-pmu-led.o
>   obj-$(CONFIG_PMAC_BACKLIGHT)	+= via-pmu-backlight.o
>   obj-$(CONFIG_ADB_CUDA)		+= via-cuda.o
> diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
> index b1859e5340b3..022e2fd4397b 100644
> --- a/drivers/macintosh/via-pmu.c
> +++ b/drivers/macintosh/via-pmu.c
> @@ -1468,12 +1468,14 @@ pmu_handle_data(unsigned char *data, int len)
>   		if (pmu_battery_count)
>   			query_battery_state();
>   		pmu_pass_intr(data, len);
> +#ifdef CONFIG_ADB_PMU_EVENT
>   		/* len == 6 is probably a bad check. But how do I
>   		 * know what PMU versions send what events here? */
>   		if (len == 6) {

Can you replace that #ifdef stuff by

		if (IS_ENABLED(CONFIG_ADB_PMU_EVENT) && len == 6) {

>   			via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
>   			via_pmu_event(PMU_EVT_LID, data[1]&1);
>   		}
> +#endif
>   		break;
>   
>   	default: