[PATCH v1] PCI/AER: Handle Multi UnCorrectable/Correctable errors properly

[Kuppuswamy Sathyanarayanan]

Currently the aer_irq() handler returns IRQ_NONE for cases without bits
PCI_ERR_ROOT_UNCOR_RCV or PCI_ERR_ROOT_COR_RCV are set. But this
assumption is incorrect.

Consider a scenario where aer_irq() is triggered for a correctable
error, and while we process the error and before we clear the error
status in "Root Error Status" register, if the same kind of error
is triggered again, since aer_irq() only clears events it saw, the
multi-bit error is left in tact. This will cause the interrupt to fire
again, resulting in entering aer_irq() with just the multi-bit error
logged in the "Root Error Status" register.

Repeated AER recovery test has revealed this condition does happen
and this prevents any new interrupt from being triggered. Allow to
process interrupt even if only multi-correctable (BIT 1) or
multi-uncorrectable bit (BIT 3) is set.

Reported-by: Eric Badger <ebadger at purestorage.com>
Reviewed-by: Ashok Raj <ashok.raj at intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy at linux.intel.com>
---
 drivers/pci/pcie/aer.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 9fa1f97e5b27..7952e5efd6cf 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -101,6 +101,11 @@ struct aer_stats {
 #define ERR_COR_ID(d)			(d & 0xffff)
 #define ERR_UNCOR_ID(d)			(d >> 16)
 
+#define AER_ERR_STATUS_MASK		(PCI_ERR_ROOT_UNCOR_RCV |	\
+					PCI_ERR_ROOT_COR_RCV |		\
+					PCI_ERR_ROOT_MULTI_COR_RCV |	\
+					PCI_ERR_ROOT_MULTI_UNCOR_RCV)
+
 static int pcie_aer_disable;
 static pci_ers_result_t aer_root_reset(struct pci_dev *dev);
 
@@ -1196,7 +1201,7 @@ static irqreturn_t aer_irq(int irq, void *context)
 	struct aer_err_source e_src = {};
 
 	pci_read_config_dword(rp, aer + PCI_ERR_ROOT_STATUS, &e_src.status);
-	if (!(e_src.status & (PCI_ERR_ROOT_UNCOR_RCV|PCI_ERR_ROOT_COR_RCV)))
+	if (!(e_src.status & AER_ERR_STATUS_MASK))
 		return IRQ_NONE;
 
 	pci_read_config_dword(rp, aer + PCI_ERR_ROOT_ERR_SRC, &e_src.id);
-- 
2.25.1