[PATCH] ASoC: fsl_micfil: change micfil default settings

Shengjiu Wang shengjiu.wang at nxp.com
Tue Jun 28 18:39:49 AEST 2022


Previous default settings resulted in loose dynamic
range and low sound level.
New default configuration changes:
- outgain = 2
- quality mode = VLOW0
- dc remover = bypass

Signed-off-by: Irina Patru <ioana-irina.patru at nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
---
 sound/soc/fsl/fsl_micfil.c | 22 ++++++++++++++++++----
 sound/soc/fsl/fsl_micfil.h |  9 +++++++++
 2 files changed, 27 insertions(+), 4 deletions(-)

diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index 25c647ae080a..18ab80b68752 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -48,6 +48,7 @@ struct fsl_micfil {
 	char name[32];
 	int irq[MICFIL_IRQ_LINES];
 	enum quality quality;
+	int dc_remover;
 };
 
 struct fsl_micfil_soc_data {
@@ -336,12 +337,25 @@ static const struct snd_soc_dai_ops fsl_micfil_dai_ops = {
 static int fsl_micfil_dai_probe(struct snd_soc_dai *cpu_dai)
 {
 	struct fsl_micfil *micfil = dev_get_drvdata(cpu_dai->dev);
-	int ret;
+	struct device *dev = cpu_dai->dev;
+	unsigned int val = 0;
+	int ret, i;
+
+	micfil->quality = QUALITY_VLOW0;
 
-	micfil->quality = QUALITY_MEDIUM;
+	/* set default gain to 2 */
+	regmap_write(micfil->regmap, REG_MICFIL_OUT_CTRL, 0x22222222);
 
-	/* set default gain to max_gain */
-	regmap_write(micfil->regmap, REG_MICFIL_OUT_CTRL, 0x77777777);
+	/* set DC Remover in bypass mode*/
+	for (i = 0; i < MICFIL_OUTPUT_CHANNELS; i++)
+		val |= MICFIL_DC_BYPASS << MICFIL_DC_CHX_SHIFT(i);
+	ret = regmap_update_bits(micfil->regmap, REG_MICFIL_DC_CTRL,
+				 MICFIL_DC_CTRL_CONFIG, val);
+	if (ret) {
+		dev_err(dev, "failed to set DC Remover mode bits\n");
+		return ret;
+	}
+	micfil->dc_remover = MICFIL_DC_BYPASS;
 
 	snd_soc_dai_init_dma_data(cpu_dai, NULL,
 				  &micfil->dma_params_rx);
diff --git a/sound/soc/fsl/fsl_micfil.h b/sound/soc/fsl/fsl_micfil.h
index 053caba3caf3..d60285dd07bc 100644
--- a/sound/soc/fsl/fsl_micfil.h
+++ b/sound/soc/fsl/fsl_micfil.h
@@ -73,6 +73,15 @@
 #define MICFIL_FIFO_STAT_FIFOX_OVER(ch)	BIT(ch)
 #define MICFIL_FIFO_STAT_FIFOX_UNDER(ch)	BIT((ch) + 8)
 
+/* MICFIL DC Remover Control Register -- REG_MICFIL_DC_CTRL */
+#define MICFIL_DC_CTRL_CONFIG          GENMASK(15, 0)
+#define MICFIL_DC_CHX_SHIFT(ch)        ((ch) << 1)
+#define MICFIL_DC_CHX(ch)              GENMASK((((ch) << 1) + 1), ((ch) << 1))
+#define MICFIL_DC_CUTOFF_21HZ          0
+#define MICFIL_DC_CUTOFF_83HZ          1
+#define MICFIL_DC_CUTOFF_152Hz         2
+#define MICFIL_DC_BYPASS               3
+
 /* MICFIL HWVAD0 Control 1 Register -- REG_MICFIL_VAD0_CTRL1*/
 #define MICFIL_VAD0_CTRL1_CHSEL		GENMASK(26, 24)
 #define MICFIL_VAD0_CTRL1_CICOSR	GENMASK(19, 16)
-- 
2.17.1



More information about the Linuxppc-dev mailing list