[PATCH v2 3/3] arch/*/: remove CONFIG_VIRT_TO_BUS

[Arnd Bergmann]

On Tue, Jun 28, 2022 at 5:25 AM Michael Schmitz <schmitzmic at gmail.com> wrote:
> Am 28.06.2022 um 09:12 schrieb Michael Schmitz:
>
> Leaving the bounce buffer handling in place, and taking a few other
> liberties - this is what converting the easiest case (a3000 SCSI) might
> look like. Any obvious mistakes? The mvme147 driver would be very
> similar to handle (after conversion to a platform device).
>
> The driver allocates bounce buffers using kmalloc if it hits an
> unaligned data buffer - can such buffers still even happen these days?
> If I understand dma_map_single() correctly, the resulting dma handle
> would be equally misaligned?
>
> To allocate a bounce buffer, would it be OK to use dma_alloc_coherent()
> even though AFAIU memory used for DMA buffers generally isn't consistent
> on m68k?

I think it makes sense to skip the bounce buffering as you do here:
the only standardized way we have for integrating that part is to
use the swiotlb infrastructure, but as you mentioned earlier that
part is probably too resource-heavy here for Amiga.

I see two other problems with your patch though:

a) you still duplicate the cache handling: the cache_clear()/cache_push()
is supposed to already be done by dma_map_single() when the device
is not cache-coherent.

b) The bounce buffer is never mapped here, instead you have the
virt_to_phys() here, which is not the same. I think you need to map
the pointer that actually gets passed down to the device after deciding
to use a bouce buffer or not.

     Arnd