[PATCH] powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers

[Pali Rohár]

On Friday 24 June 2022 10:27:00 Pali Rohár wrote:
> On Friday 24 June 2022 13:08:59 Michael Ellerman wrote:
> > Pali Rohár <pali at kernel.org> writes:
> > > CZ.NIC Turris 1.0 and 1.1 are open source routers, they have dual-core
> > > PowerPC Freescale P2020 CPU and are based on Freescale P2020RDB-PC-A board.
> > > Hardware design is fully open source, all firmware and hardware design
> > > files are available at Turris project website:
> > >
> > > https://docs.turris.cz/hw/turris-1x/turris-1x/
> > > https://project.turris.cz/en/hardware.html
> > >
> > > Signed-off-by: Pali Rohár <pali at kernel.org>
> > > ---
> > >  arch/powerpc/boot/dts/turris1x.dts | 470 +++++++++++++++++++++++++++++
> > >  1 file changed, 470 insertions(+)
> > >  create mode 100644 arch/powerpc/boot/dts/turris1x.dts
> > 
> > The headers say you Cc'ed this to the devicetree list, but I don't see
> > it in the devicetree patchwork:
> > 
> >   https://patchwork.ozlabs.org/project/devicetree-bindings/list/?state=*&q=turris&archive=both
> 
> Email is on the devicetree list:
> https://lore.kernel.org/linux-devicetree/20220511143712.22550-1-pali@kernel.org/
> 
> > Which means it hasn't been run through Rob's CI scripts.
> > 
> > Maybe try a resend?
> > 
> > cheers

Now I sent V2 and it appeared in devicetree list archive too:
https://lore.kernel.org/linux-devicetree/20220624085550.20570-1-pali@kernel.org/