[PATCH -next v5 2/8] arm64: extable: make uaaccess helper use extable type EX_TYPE_UACCESS_ERR_ZERO

[Mark Rutland]

On Mon, Jun 20, 2022 at 10:59:12AM +0800, Tong Tiangen wrote:
> 在 2022/6/18 20:40, Mark Rutland 写道:
> > On Sat, Jun 18, 2022 at 04:42:06PM +0800, Tong Tiangen wrote:
> > > > > > diff --git a/arch/arm64/include/asm/asm-extable.h
> > > > > > b/arch/arm64/include/asm/asm-extable.h
> > > > > > index 56ebe183e78b..9c94ac1f082c 100644
> > > > > > --- a/arch/arm64/include/asm/asm-extable.h
> > > > > > +++ b/arch/arm64/include/asm/asm-extable.h
> > > > > > @@ -28,6 +28,14 @@
> > > > > >        __ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_FIXUP, 0)
> > > > > >        .endm
> > > > > > +/*
> > > > > > + * Create an exception table entry for uaccess `insn`, which
> > > > > > will branch to `fixup`
> > > > > > + * when an unhandled fault is taken.
> > > > > > + * ex->data = ~0 means both reg_err and reg_zero is set to wzr(x31).
> > > > > > + */
> > > > > > +    .macro          _asm_extable_uaccess, insn, fixup
> > > > > > +    __ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_UACCESS_ERR_ZERO, ~0)
> > > > > > +    .endm
> > > > > 
> > > > > I'm not too keen on using `~0` here, since that also sets other bits
> > > > > in the
> > > > > data field, and its somewhat opaque.
> > > > > 
> > > > > How painful is it to generate the data fields as with the C version
> > > > > of this
> > > > > macro, so that we can pass in wzr explciitly for the two sub-fields?
> > > > > 
> > > > > Other than that, this looks good to me.
> > > > > 
> > > > > Thanks,
> > > > > Mark.
> > > > 
> > > > ok, will fix next version.
> > > > 
> > > > Thanks,
> > > > Tong.
> > > 
> > > I tried to using data filelds as with C version, but here assembly code we
> > > can not using operator such as << and |, if we use lsl and orr instructions,
> > > the gpr will be occupied.
> > > 
> > > So how about using 0x3ff directly here? it means err register and zero
> > > register both set to x31.
> > 
> > I had a go at implementing this, and it seems simple enough. Please see:
> > 
> >    https://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git/log/?h=arm64/extable/asm-uaccess
> > 
> 
> I made the following modifications, and the other parts are based on your
> implementation:
> 
> arch/arm64/include/asm/asm-extable.h
> [...]
> .macro          _asm_extable_uaccess, insn, fixup
> _ASM_EXTABLE_UACCESS(\insn, \fixup)
> .endm
> [...]

I also made this same change locally when testing, and building with GCC 11.1.0
or LLVM 14.0.0 I am not seeing any problem when building, and the result is as
expected:

| [mark at lakrids:~/src/linux]% usekorg 11.1.0 make ARCH=arm64 CROSS_COMPILE=aarch64-linux- defconfig
| *** Default configuration is based on 'defconfig'
| #
| # No change to .config
| #
| [mark at lakrids:~/src/linux]% usekorg 11.1.0 make ARCH=arm64 CROSS_COMPILE=aarch64-linux- -j50 arch/arm64/lib/
|   CALL    scripts/atomic/check-atomics.sh
|   CC      arch/arm64/kernel/asm-offsets.s
|   CALL    scripts/checksyscalls.sh
|   AS      arch/arm64/kernel/vdso/note.o
|   AS      arch/arm64/kernel/vdso/sigreturn.o
|   LD      arch/arm64/kernel/vdso/vdso.so.dbg
|   VDSOSYM include/generated/vdso-offsets.h
|   OBJCOPY arch/arm64/kernel/vdso/vdso.so
| make[2]: Nothing to be done for 'arch/arm64/lib/'.
|   AS      arch/arm64/lib/clear_page.o
|   AS      arch/arm64/lib/clear_user.o
|   AS      arch/arm64/lib/copy_from_user.o
|   AS      arch/arm64/lib/copy_page.o
|   AS      arch/arm64/lib/copy_to_user.o
|   CC      arch/arm64/lib/csum.o
|   CC      arch/arm64/lib/delay.o
|   AS      arch/arm64/lib/memchr.o
|   AS      arch/arm64/lib/memcmp.o
|   AS      arch/arm64/lib/memcpy.o
|   AS      arch/arm64/lib/memset.o
|   AS      arch/arm64/lib/strchr.o
|   AS      arch/arm64/lib/strcmp.o
|   AS      arch/arm64/lib/strlen.o
|   AS      arch/arm64/lib/strncmp.o
|   AS      arch/arm64/lib/strnlen.o
|   AS      arch/arm64/lib/strrchr.o
|   AS      arch/arm64/lib/tishift.o
|   AS      arch/arm64/lib/crc32.o
|   AS      arch/arm64/lib/mte.o
|   CC [M]  arch/arm64/lib/xor-neon.o
|   AR      arch/arm64/lib/built-in.a
|   AR      arch/arm64/lib/lib.a
| [mark at lakrids:~/src/linux]% usekorg 12.1.0 aarch64-linux-objdump -j __ex_table -D arch/arm64/lib/clear_user.o
| 
| arch/arm64/lib/clear_user.o:     file format elf64-littleaarch64
| 
| 
| Disassembly of section __ex_table:
| 
| 0000000000000000 <__ex_table>:
|         ...
|    8:   03ff0003        .inst   0x03ff0003 ; undefined
|         ...
|   14:   03ff0003        .inst   0x03ff0003 ; undefined
|         ...
|   20:   03ff0003        .inst   0x03ff0003 ; undefined
|         ...
|   2c:   03ff0003        .inst   0x03ff0003 ; undefined
|         ...
|   38:   03ff0003        .inst   0x03ff0003 ; undefined
|         ...
|   44:   03ff0003        .inst   0x03ff0003 ; undefined

> The following errors are reported during compilation:
> [...]
> arch/arm64/lib/clear_user.S:45: Error: invalid operands (*ABS* and *UND*
> sections) for `<<'
> [...]

As above, I'm not seeing this.

This suggests that the EX_DATA_REG() macro is going wrong somehow. Assuming the
operand types correspond to the LHS and RHS of the expression, this would mean
the GPR number is defined, but the REG value is not, and I can't currently see
how that can happen.

> "<<" is invalid operands in assembly, is there something wrong with me?

At the moment I can only assume there is a local problem. I'd suspect a typo
somewhere, but maybe you have a toolchain which behaves differently?

Thanks,
Mark.