[PATCH v4] powerpc:85xx: Add missing of_node_put() in sgy_cst1000

[Liang He]

At 2022-06-17 14:28:56, "Christophe Leroy" <christophe.leroy at csgroup.eu> wrote:
>
>
>Le 17/06/2022 à 08:08, Liang He a écrit :
>> In gpio_halt_probe(), of_find_matching_node() will return a node
>> pointer with refcount incremented. We should use of_node_put() in
>> fail path or when it is not used anymore.
>> 
>> Signed-off-by: Liang He <windhl at 126.com>
>> ---
>>   changelog:
>>   v4: reuse exist 'err' and use a simple code style, advised by CJ
>>   v3: use local 'child_node' advised by Michael.
>>   v2: use goto-label patch style advised by Christophe Leroy.
>>   v1: add of_node_put() before each exit.
>> 
>>   arch/powerpc/platforms/85xx/sgy_cts1000.c | 35 ++++++++++++++---------
>>   1 file changed, 22 insertions(+), 13 deletions(-)
>> 
>> diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c
>> index 98ae64075193..e4588943fe7e 100644
>> --- a/arch/powerpc/platforms/85xx/sgy_cts1000.c
>> +++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c
>> @@ -71,6 +71,7 @@ static int gpio_halt_probe(struct platform_device *pdev)
>>   {
>>   	enum of_gpio_flags flags;
>>   	struct device_node *node = pdev->dev.of_node;
>> +	struct device_node *child_node;
>>   	int gpio, err, irq;
>>   	int trigger;
>>   
>> @@ -78,26 +79,29 @@ static int gpio_halt_probe(struct platform_device *pdev)
>>   		return -ENODEV;
>>   
>>   	/* If there's no matching child, this isn't really an error */
>> -	halt_node = of_find_matching_node(node, child_match);
>> -	if (!halt_node)
>> +	child_node = of_find_matching_node(node, child_match);
>> +	if (!child_node)
>>   		return 0;
>>   
>>   	/* Technically we could just read the first one, but punish
>>   	 * DT writers for invalid form. */
>> -	if (of_gpio_count(halt_node) != 1)
>> -		return -EINVAL;
>> +	if (of_gpio_count(child_node) != 1) {
>> +		err = -EINVAL;
>> +		goto err_put;
>> +	}
>>   
>>   	/* Get the gpio number relative to the dynamic base. */
>> -	gpio = of_get_gpio_flags(halt_node, 0, &flags);
>> -	if (!gpio_is_valid(gpio))
>> -		return -EINVAL;
>> +	gpio = of_get_gpio_flags(child_node, 0, &flags);
>> +	if (!gpio_is_valid(gpio)) {
>> +		err = -EINVAL;
>> +		gotot err_put;
>
>Did you test the build ?

Sorry for this fault. 

In fact, I am still finding an efficient way to building different arch source code as I only have x86-64.

Now I am try using QEMU.

Anyway, sorry for this fault.


>
>> +	}
>>   
>>   	err = gpio_request(gpio, "gpio-halt");
>>   	if (err) {
>>   		printk(KERN_ERR "gpio-halt: error requesting GPIO %d.\n",
>>   		       gpio);
>> -		halt_node = NULL;
>> -		return err;
>> +		goto err_put;
>>   	}
>>   
>>   	trigger = (flags == OF_GPIO_ACTIVE_LOW);
>> @@ -105,15 +109,14 @@ static int gpio_halt_probe(struct platform_device *pdev)
>>   	gpio_direction_output(gpio, !trigger);
>>   
>>   	/* Now get the IRQ which tells us when the power button is hit */
>> -	irq = irq_of_parse_and_map(halt_node, 0);
>> +	irq = irq_of_parse_and_map(child_node, 0);
>>   	err = request_irq(irq, gpio_halt_irq, IRQF_TRIGGER_RISING |
>> -			  IRQF_TRIGGER_FALLING, "gpio-halt", halt_node);
>> +			  IRQF_TRIGGER_FALLING, "gpio-halt", child_node);
>>   	if (err) {
>>   		printk(KERN_ERR "gpio-halt: error requesting IRQ %d for "
>>   		       "GPIO %d.\n", irq, gpio);
>>   		gpio_free(gpio);
>> -		halt_node = NULL;
>> -		return err;
>> +		goto err_put;
>>   	}
>>   
>>   	/* Register our halt function */
>> @@ -123,7 +126,12 @@ static int gpio_halt_probe(struct platform_device *pdev)
>>   	printk(KERN_INFO "gpio-halt: registered GPIO %d (%d trigger, %d"
>>   	       " irq).\n", gpio, trigger, irq);
>>   
>> +	halt_node = child_node;
>>   	return 0;
>> +
>> +err_put:
>> +	of_node_put(child_node);
>> +	return err;
>>   }
>>   
>>   static int gpio_halt_remove(struct platform_device *pdev)
>> @@ -139,6 +147,7 @@ static int gpio_halt_remove(struct platform_device *pdev)
>>   
>>   		gpio_free(gpio);
>>   
>> +		of_node_put(halt_node);
>>   		halt_node = NULL;
>>   	}
>>