[PATCH v2 1/2] powerpc/pci: Add config option for using OF 'reg' for PCI domain
Pali Rohár
pali at kernel.org
Sat Jul 16 03:11:32 AEST 2022
On Friday 15 July 2022 11:55:04 Guilherme G. Piccoli wrote:
> On 06/07/2022 07:21, Pali Rohár wrote:
> > [...]
> > Fix this issue and introduce a new option CONFIG_PPC_PCI_DOMAIN_FROM_OF_REG.
> > When this option is disabled then powerpc kernel would assign PCI domains
> > in the similar way like it is doing kernel for other architectures,
> > starting from zero and also how it was done prior that commit.
>
> I found this sentence a bit weird, "in the similar way like it is doing
> kernel for other architectures", but other than that:
If you have some idea how to improve commit description, let me know and
I can change it.
> Reviewed-by: Guilherme G. Piccoli <gpiccoli at igalia.com>
>
> Thanks for the improvement!
> Cheers,
>
>
> Guilherme
>
>
> >
> > This option is by default enabled for powernv and pseries platform for which
> > was that commit originally intended.
> >
> > With this change upgrading kernels from LTS 4.4 version does not change PCI
> > domain on smaller embedded platforms with fixed number of PCIe controllers.
> > And also ensure that PCI domain zero is present as before that commit.
> >
> > Fixes: 63a72284b159 ("powerpc/pci: Assign fixed PHB number based on device-tree properties")
> > Signed-off-by: Pali Rohár <pali at kernel.org>
> > ---
> > Changes in v2:
> > * Enable CONFIG_PPC_PCI_DOMAIN_FROM_OF_REG by default on powernv and pseries
> > ---
> > arch/powerpc/Kconfig | 11 +++++++++++
> > arch/powerpc/kernel/pci-common.c | 4 ++--
> > 2 files changed, 13 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> > index f66084bc1dfe..053a88e84049 100644
> > --- a/arch/powerpc/Kconfig
> > +++ b/arch/powerpc/Kconfig
> > @@ -386,6 +386,17 @@ config PPC_OF_PLATFORM_PCI
> > depends on PCI
> > depends on PPC64 # not supported on 32 bits yet
> >
> > +config PPC_PCI_DOMAIN_FROM_OF_REG
> > + bool "Use OF reg property for PCI domain"
> > + depends on PCI
> > + default y if PPC_PSERIES || PPC_POWERNV
> > + help
> > + By default PCI domain for host bridge during its registration is
> > + chosen as the lowest unused PCI domain number.
> > +
> > + When this option is enabled then PCI domain can be determined
> > + also from lower bits of the OF / Device Tree 'reg' property.
> > +
> > config ARCH_SUPPORTS_UPROBES
> > def_bool y
> >
> > diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
> > index 068410cd54a3..7f959df34833 100644
> > --- a/arch/powerpc/kernel/pci-common.c
> > +++ b/arch/powerpc/kernel/pci-common.c
> > @@ -74,7 +74,6 @@ void __init set_pci_dma_ops(const struct dma_map_ops *dma_ops)
> > static int get_phb_number(struct device_node *dn)
> > {
> > int ret, phb_id = -1;
> > - u32 prop_32;
> > u64 prop;
> >
> > /*
> > @@ -83,7 +82,8 @@ static int get_phb_number(struct device_node *dn)
> > * reading "ibm,opal-phbid", only present in OPAL environment.
> > */
> > ret = of_property_read_u64(dn, "ibm,opal-phbid", &prop);
> > - if (ret) {
> > + if (ret && IS_ENABLED(CONFIG_PPC_PCI_DOMAIN_FROM_OF_REG)) {
> > + u32 prop_32;
> > ret = of_property_read_u32_index(dn, "reg", 1, &prop_32);
> > prop = prop_32;
> > }
More information about the Linuxppc-dev
mailing list