[PATCH v3 14/14] perf/hw_breakpoint: Optimize toggle_bp_slot() for CPU-independent task targets

Marco Elver elver at google.com
Tue Jul 5 01:05:14 AEST 2022


We can still see that a majority of the time is spent hashing task pointers:

    ...
    16.98%  [kernel]       [k] rhashtable_jhash2
    ...

Doing the bookkeeping in toggle_bp_slots() is currently O(#cpus),
calling task_bp_pinned() for each CPU, even if task_bp_pinned() is
CPU-independent. The reason for this is to update the per-CPU
'tsk_pinned' histogram.

To optimize the CPU-independent case to O(1), keep a separate
CPU-independent 'tsk_pinned_all' histogram.

The major source of complexity are transitions between "all
CPU-independent task breakpoints" and "mixed CPU-independent and
CPU-dependent task breakpoints". The code comments list all cases that
require handling.

After this optimization:

 | $> perf bench -r 100 breakpoint thread -b 4 -p 128 -t 512
 | # Running 'breakpoint/thread' benchmark:
 | # Created/joined 100 threads with 4 breakpoints and 128 parallelism
 |      Total time: 1.758 [sec]
 |
 |       34.336621 usecs/op
 |     4395.087500 usecs/op/cpu

    38.08%  [kernel]       [k] queued_spin_lock_slowpath
    10.81%  [kernel]       [k] smp_cfm_core_cond
     3.01%  [kernel]       [k] update_sg_lb_stats
     2.58%  [kernel]       [k] osq_lock
     2.57%  [kernel]       [k] llist_reverse_order
     1.45%  [kernel]       [k] find_next_bit
     1.21%  [kernel]       [k] flush_tlb_func_common
     1.01%  [kernel]       [k] arch_install_hw_breakpoint

Showing that the time spent hashing keys has become insignificant.

With the given benchmark parameters, that's an improvement of 12%
compared with the old O(#cpus) version.

And finally, using the less aggressive parameters from the preceding
changes, we now observe:

 | $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
 | # Running 'breakpoint/thread' benchmark:
 | # Created/joined 30 threads with 4 breakpoints and 64 parallelism
 |      Total time: 0.067 [sec]
 |
 |       35.292187 usecs/op
 |     2258.700000 usecs/op/cpu

Which is an improvement of 12% compared to without the histogram
optimizations (baseline is 40 usecs/op). This is now on par with the
theoretical ideal (constraints disabled), and only 12% slower than no
breakpoints at all.

Signed-off-by: Marco Elver <elver at google.com>
Reviewed-by: Dmitry Vyukov <dvyukov at google.com>
---
v3:
* Fix typo "5 cases" -> "4 cases".
* Update hw_breakpoint_is_used() to check tsk_pinned_all.

v2:
* New patch.
---
 kernel/events/hw_breakpoint.c | 155 +++++++++++++++++++++++++++-------
 1 file changed, 124 insertions(+), 31 deletions(-)

diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c
index a489f31fe147..7ef0e98d31e2 100644
--- a/kernel/events/hw_breakpoint.c
+++ b/kernel/events/hw_breakpoint.c
@@ -66,6 +66,8 @@ static struct bp_cpuinfo *get_bp_info(int cpu, enum bp_type_idx type)
 
 /* Number of pinned CPU breakpoints globally. */
 static struct bp_slots_histogram cpu_pinned[TYPE_MAX];
+/* Number of pinned CPU-independent task breakpoints. */
+static struct bp_slots_histogram tsk_pinned_all[TYPE_MAX];
 
 /* Keep track of the breakpoints attached to tasks */
 static struct rhltable task_bps_ht;
@@ -200,6 +202,8 @@ static __init int init_breakpoint_slots(void)
 	for (i = 0; i < TYPE_MAX; i++) {
 		if (!bp_slots_histogram_alloc(&cpu_pinned[i], i))
 			goto err;
+		if (!bp_slots_histogram_alloc(&tsk_pinned_all[i], i))
+			goto err;
 	}
 
 	return 0;
@@ -210,8 +214,10 @@ static __init int init_breakpoint_slots(void)
 		if (err_cpu == cpu)
 			break;
 	}
-	for (i = 0; i < TYPE_MAX; i++)
+	for (i = 0; i < TYPE_MAX; i++) {
 		bp_slots_histogram_free(&cpu_pinned[i]);
+		bp_slots_histogram_free(&tsk_pinned_all[i]);
+	}
 
 	return -ENOMEM;
 }
@@ -245,6 +251,26 @@ bp_slots_histogram_max(struct bp_slots_histogram *hist, enum bp_type_idx type)
 	return 0;
 }
 
+static int
+bp_slots_histogram_max_merge(struct bp_slots_histogram *hist1, struct bp_slots_histogram *hist2,
+			     enum bp_type_idx type)
+{
+	for (int i = hw_breakpoint_slots_cached(type) - 1; i >= 0; i--) {
+		const int count1 = atomic_read(&hist1->count[i]);
+		const int count2 = atomic_read(&hist2->count[i]);
+
+		/* Catch unexpected writers; we want a stable snapshot. */
+		ASSERT_EXCLUSIVE_WRITER(hist1->count[i]);
+		ASSERT_EXCLUSIVE_WRITER(hist2->count[i]);
+		if (count1 + count2 > 0)
+			return i + 1;
+		WARN(count1 < 0, "inconsistent breakpoint slots histogram");
+		WARN(count2 < 0, "inconsistent breakpoint slots histogram");
+	}
+
+	return 0;
+}
+
 #ifndef hw_breakpoint_weight
 static inline int hw_breakpoint_weight(struct perf_event *bp)
 {
@@ -273,7 +299,7 @@ static unsigned int max_task_bp_pinned(int cpu, enum bp_type_idx type)
 	 * toggle_bp_task_slot() to tsk_pinned, and we get a stable snapshot.
 	 */
 	lockdep_assert_held_write(&bp_cpuinfo_sem);
-	return bp_slots_histogram_max(tsk_pinned, type);
+	return bp_slots_histogram_max_merge(tsk_pinned, &tsk_pinned_all[type], type);
 }
 
 /*
@@ -366,40 +392,22 @@ max_bp_pinned_slots(struct perf_event *bp, enum bp_type_idx type)
 	return pinned_slots;
 }
 
-/*
- * Add a pinned breakpoint for the given task in our constraint table
- */
-static void toggle_bp_task_slot(struct perf_event *bp, int cpu,
-				enum bp_type_idx type, int weight)
-{
-	struct bp_slots_histogram *tsk_pinned = &get_bp_info(cpu, type)->tsk_pinned;
-
-	/*
-	 * If bp->hw.target, tsk_pinned is only modified, but not used
-	 * otherwise. We can permit concurrent updates as long as there are no
-	 * other uses: having acquired bp_cpuinfo_sem as a reader allows
-	 * concurrent updates here. Uses of tsk_pinned will require acquiring
-	 * bp_cpuinfo_sem as a writer to stabilize tsk_pinned's value.
-	 */
-	lockdep_assert_held_read(&bp_cpuinfo_sem);
-	bp_slots_histogram_add(tsk_pinned, task_bp_pinned(cpu, bp, type), weight);
-}
-
 /*
  * Add/remove the given breakpoint in our constraint table
  */
 static int
-toggle_bp_slot(struct perf_event *bp, bool enable, enum bp_type_idx type,
-	       int weight)
+toggle_bp_slot(struct perf_event *bp, bool enable, enum bp_type_idx type, int weight)
 {
-	const struct cpumask *cpumask = cpumask_of_bp(bp);
-	int cpu;
+	int cpu, next_tsk_pinned;
 
 	if (!enable)
 		weight = -weight;
 
-	/* Pinned counter cpu profiling */
 	if (!bp->hw.target) {
+		/*
+		 * Update the pinned CPU slots, in per-CPU bp_cpuinfo and in the
+		 * global histogram.
+		 */
 		struct bp_cpuinfo *info = get_bp_info(bp->cpu, type);
 
 		lockdep_assert_held_write(&bp_cpuinfo_sem);
@@ -408,9 +416,91 @@ toggle_bp_slot(struct perf_event *bp, bool enable, enum bp_type_idx type,
 		return 0;
 	}
 
-	/* Pinned counter task profiling */
-	for_each_cpu(cpu, cpumask)
-		toggle_bp_task_slot(bp, cpu, type, weight);
+	/*
+	 * If bp->hw.target, tsk_pinned is only modified, but not used
+	 * otherwise. We can permit concurrent updates as long as there are no
+	 * other uses: having acquired bp_cpuinfo_sem as a reader allows
+	 * concurrent updates here. Uses of tsk_pinned will require acquiring
+	 * bp_cpuinfo_sem as a writer to stabilize tsk_pinned's value.
+	 */
+	lockdep_assert_held_read(&bp_cpuinfo_sem);
+
+	/*
+	 * Update the pinned task slots, in per-CPU bp_cpuinfo and in the global
+	 * histogram. We need to take care of 4 cases:
+	 *
+	 *  1. This breakpoint targets all CPUs (cpu < 0), and there may only
+	 *     exist other task breakpoints targeting all CPUs. In this case we
+	 *     can simply update the global slots histogram.
+	 *
+	 *  2. This breakpoint targets a specific CPU (cpu >= 0), but there may
+	 *     only exist other task breakpoints targeting all CPUs.
+	 *
+	 *     a. On enable: remove the existing breakpoints from the global
+	 *        slots histogram and use the per-CPU histogram.
+	 *
+	 *     b. On disable: re-insert the existing breakpoints into the global
+	 *        slots histogram and remove from per-CPU histogram.
+	 *
+	 *  3. Some other existing task breakpoints target specific CPUs. Only
+	 *     update the per-CPU slots histogram.
+	 */
+
+	if (!enable) {
+		/*
+		 * Remove before updating histograms so we can determine if this
+		 * was the last task breakpoint for a specific CPU.
+		 */
+		int ret = rhltable_remove(&task_bps_ht, &bp->hw.bp_list, task_bps_ht_params);
+
+		if (ret)
+			return ret;
+	}
+	/*
+	 * Note: If !enable, next_tsk_pinned will not count the to-be-removed breakpoint.
+	 */
+	next_tsk_pinned = task_bp_pinned(-1, bp, type);
+
+	if (next_tsk_pinned >= 0) {
+		if (bp->cpu < 0) { /* Case 1: fast path */
+			if (!enable)
+				next_tsk_pinned += hw_breakpoint_weight(bp);
+			bp_slots_histogram_add(&tsk_pinned_all[type], next_tsk_pinned, weight);
+		} else if (enable) { /* Case 2.a: slow path */
+			/* Add existing to per-CPU histograms. */
+			for_each_possible_cpu(cpu) {
+				bp_slots_histogram_add(&get_bp_info(cpu, type)->tsk_pinned,
+						       0, next_tsk_pinned);
+			}
+			/* Add this first CPU-pinned task breakpoint. */
+			bp_slots_histogram_add(&get_bp_info(bp->cpu, type)->tsk_pinned,
+					       next_tsk_pinned, weight);
+			/* Rebalance global task pinned histogram. */
+			bp_slots_histogram_add(&tsk_pinned_all[type], next_tsk_pinned,
+					       -next_tsk_pinned);
+		} else { /* Case 2.b: slow path */
+			/* Remove this last CPU-pinned task breakpoint. */
+			bp_slots_histogram_add(&get_bp_info(bp->cpu, type)->tsk_pinned,
+					       next_tsk_pinned + hw_breakpoint_weight(bp), weight);
+			/* Remove all from per-CPU histograms. */
+			for_each_possible_cpu(cpu) {
+				bp_slots_histogram_add(&get_bp_info(cpu, type)->tsk_pinned,
+						       next_tsk_pinned, -next_tsk_pinned);
+			}
+			/* Rebalance global task pinned histogram. */
+			bp_slots_histogram_add(&tsk_pinned_all[type], 0, next_tsk_pinned);
+		}
+	} else { /* Case 3: slow path */
+		const struct cpumask *cpumask = cpumask_of_bp(bp);
+
+		for_each_cpu(cpu, cpumask) {
+			next_tsk_pinned = task_bp_pinned(cpu, bp, type);
+			if (!enable)
+				next_tsk_pinned += hw_breakpoint_weight(bp);
+			bp_slots_histogram_add(&get_bp_info(cpu, type)->tsk_pinned,
+					       next_tsk_pinned, weight);
+		}
+	}
 
 	/*
 	 * Readers want a stable snapshot of the per-task breakpoint list.
@@ -419,8 +509,8 @@ toggle_bp_slot(struct perf_event *bp, bool enable, enum bp_type_idx type,
 
 	if (enable)
 		return rhltable_insert(&task_bps_ht, &bp->hw.bp_list, task_bps_ht_params);
-	else
-		return rhltable_remove(&task_bps_ht, &bp->hw.bp_list, task_bps_ht_params);
+
+	return 0;
 }
 
 __weak int arch_reserve_bp_slot(struct perf_event *bp)
@@ -850,6 +940,9 @@ bool hw_breakpoint_is_used(void)
 			 */
 			if (WARN_ON(atomic_read(&cpu_pinned[type].count[slot])))
 				return true;
+
+			if (atomic_read(&tsk_pinned_all[type].count[slot]))
+				return true;
 		}
 	}
 
-- 
2.37.0.rc0.161.g10f37bed90-goog



More information about the Linuxppc-dev mailing list