[PATCH 1/2] PCI/AER: Disable AER when link is in L2/L3 ready, L2 and L3 state

[Mika Westerberg]

Hi,

On Thu, Jan 27, 2022 at 10:21:35AM +0800, Kai-Heng Feng wrote:
> On Wed, Jan 26, 2022 at 7:03 PM Mika Westerberg
> <mika.westerberg at linux.intel.com> wrote:
> >
> > Hi,
> >
> > On Wed, Jan 26, 2022 at 03:18:51PM +0800, Kai-Heng Feng wrote:
> > > Commit 50310600ebda ("iommu/vt-d: Enable PCI ACS for platform opt in
> > > hint") enables ACS, and some platforms lose its NVMe after resume from
> > > S3:
> > > [   50.947816] pcieport 0000:00:1b.0: DPC: containment event, status:0x1f01 source:0x0000
> > > [   50.947817] pcieport 0000:00:1b.0: DPC: unmasked uncorrectable error detected
> > > [   50.947829] pcieport 0000:00:1b.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Receiver ID)
> > > [   50.947830] pcieport 0000:00:1b.0:   device [8086:06ac] error status/mask=00200000/00010000
> > > [   50.947831] pcieport 0000:00:1b.0:    [21] ACSViol                (First)
> > > [   50.947841] pcieport 0000:00:1b.0: AER: broadcast error_detected message
> > > [   50.947843] nvme nvme0: frozen state error detected, reset controller
> > >
> > > It happens right after ACS gets enabled during resume.
> >
> > Is this really because of the above commit of due the fact that AER
> > "service" never implemented the PM hooks in the first place ;-)
> 
> >From what I can understand, all services other than PME should be
> disabled during suspend.
> 
> For example, should we convert commit a697f072f5da8 ("PCI: Disable PTM
> during suspend to save power") to PM hooks in PTM service?

Yes, I think that's the right thing to do. I wonder how it was not using
the PM hooks in the first place.