[PATCH v3 2/2] pseries/mce: Refactor the pseries mce handling code

Ganesh ganeshgr at linux.ibm.com
Mon Jan 17 19:11:03 AEDT 2022


On 11/24/21 18:40, Nicholas Piggin wrote:

> Excerpts from Ganesh Goudar's message of November 24, 2021 7:55 pm:
>> Now that we are no longer switching on the mmu in realmode
>> mce handler, Revert the commit 4ff753feab02("powerpc/pseries:
>> Avoid using addr_to_pfn in real mode") partially, which
>> introduced functions mce_handle_err_virtmode/realmode() to
>> separate mce handler code which needed translation to enabled.
>>
>> Signed-off-by: Ganesh Goudar<ganeshgr at linux.ibm.com>
>> ---
>>   arch/powerpc/platforms/pseries/ras.c | 122 +++++++++++----------------
>>   1 file changed, 49 insertions(+), 73 deletions(-)
>>
>> diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
>> index 8613f9cc5798..62e1519b8355 100644
>> --- a/arch/powerpc/platforms/pseries/ras.c
>> +++ b/arch/powerpc/platforms/pseries/ras.c
>> @@ -511,58 +511,17 @@ int pSeries_system_reset_exception(struct pt_regs *regs)
>>   	return 0; /* need to perform reset */
>>   }
>>   
>> -static int mce_handle_err_realmode(int disposition, u8 error_type)
>> -{
>> -#ifdef CONFIG_PPC_BOOK3S_64
>> -	if (disposition == RTAS_DISP_NOT_RECOVERED) {
>> -		switch (error_type) {
>> -		case	MC_ERROR_TYPE_ERAT:
>> -			flush_erat();
>> -			disposition = RTAS_DISP_FULLY_RECOVERED;
>> -			break;
>> -		case	MC_ERROR_TYPE_SLB:
>> -			/*
>> -			 * Store the old slb content in paca before flushing.
>> -			 * Print this when we go to virtual mode.
>> -			 * There are chances that we may hit MCE again if there
>> -			 * is a parity error on the SLB entry we trying to read
>> -			 * for saving. Hence limit the slb saving to single
>> -			 * level of recursion.
>> -			 */
>> -			if (local_paca->in_mce == 1)
>> -				slb_save_contents(local_paca->mce_faulty_slbs);
>> -			flush_and_reload_slb();
>> -			disposition = RTAS_DISP_FULLY_RECOVERED;
>> -			break;
>> -		default:
>> -			break;
>> -		}
>> -	} else if (disposition == RTAS_DISP_LIMITED_RECOVERY) {
>> -		/* Platform corrected itself but could be degraded */
>> -		pr_err("MCE: limited recovery, system may be degraded\n");
>> -		disposition = RTAS_DISP_FULLY_RECOVERED;
>> -	}
>> -#endif
>> -	return disposition;
>> -}
>> -
>> -static int mce_handle_err_virtmode(struct pt_regs *regs,
>> -				   struct rtas_error_log *errp,
>> -				   struct pseries_mc_errorlog *mce_log,
>> -				   int disposition)
>> +static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
>>   {
>>   	struct mce_error_info mce_err = { 0 };
>> +	unsigned long eaddr = 0, paddr = 0;
>> +	struct pseries_errorlog *pseries_log;
>> +	struct pseries_mc_errorlog *mce_log;
>> +	int disposition = rtas_error_disposition(errp);
>>   	int initiator = rtas_error_initiator(errp);
>>   	int severity = rtas_error_severity(errp);
>> -	unsigned long eaddr = 0, paddr = 0;
>>   	u8 error_type, err_sub_type;
>>   
>> -	if (!mce_log)
>> -		goto out;
>> -
>> -	error_type = mce_log->error_type;
>> -	err_sub_type = rtas_mc_error_sub_type(mce_log);
>> -
>>   	if (initiator == RTAS_INITIATOR_UNKNOWN)
>>   		mce_err.initiator = MCE_INITIATOR_UNKNOWN;
>>   	else if (initiator == RTAS_INITIATOR_CPU)
>> @@ -588,6 +547,8 @@ static int mce_handle_err_virtmode(struct pt_regs *regs,
>>   		mce_err.severity = MCE_SEV_SEVERE;
>>   	else if (severity == RTAS_SEVERITY_ERROR)
>>   		mce_err.severity = MCE_SEV_SEVERE;
>> +	else if (severity == RTAS_SEVERITY_FATAL)
>> +		mce_err.severity = MCE_SEV_FATAL;
>>   	else
>>   		mce_err.severity = MCE_SEV_FATAL;
>>   
> What's this hunk for?
>
>> @@ -599,7 +560,18 @@ static int mce_handle_err_virtmode(struct pt_regs *regs,
>>   	mce_err.error_type = MCE_ERROR_TYPE_UNKNOWN;
>>   	mce_err.error_class = MCE_ECLASS_UNKNOWN;
>>   
>> -	switch (error_type) {
>> +	if (!rtas_error_extended(errp))
>> +		goto out;
>> +
>> +	pseries_log = get_pseries_errorlog(errp, PSERIES_ELOG_SECT_ID_MCE);
>> +	if (!pseries_log)
>> +		goto out;
>> +
>> +	mce_log = (struct pseries_mc_errorlog *)pseries_log->data;
>> +	error_type = mce_log->error_type;
>> +	err_sub_type = rtas_mc_error_sub_type(mce_log);
>> +
>> +	switch (mce_log->error_type) {
>>   	case MC_ERROR_TYPE_UE:
>>   		mce_err.error_type = MCE_ERROR_TYPE_UE;
>>   		mce_common_process_ue(regs, &mce_err);
>> @@ -692,41 +664,45 @@ static int mce_handle_err_virtmode(struct pt_regs *regs,
>>   		mce_err.error_type = MCE_ERROR_TYPE_DCACHE;
>>   		break;
>>   	case MC_ERROR_TYPE_I_CACHE:
>> -		mce_err.error_type = MCE_ERROR_TYPE_ICACHE;
>> +		mce_err.error_type = MCE_ERROR_TYPE_DCACHE;
>>   		break;
> And this one. Doesn't look right.
>
>>   	case MC_ERROR_TYPE_UNKNOWN:
>>   	default:
>>   		mce_err.error_type = MCE_ERROR_TYPE_UNKNOWN;
>>   		break;
>>   	}
>> +
>> +#ifdef CONFIG_PPC_BOOK3S_64
>> +	if (disposition == RTAS_DISP_NOT_RECOVERED) {
>> +		switch (error_type) {
>> +		case	MC_ERROR_TYPE_SLB:
>> +		case	MC_ERROR_TYPE_ERAT:
>> +			/*
>> +			 * Store the old slb content in paca before flushing.
>> +			 * Print this when we go to virtual mode.
>> +			 * There are chances that we may hit MCE again if there
>> +			 * is a parity error on the SLB entry we trying to read
>> +			 * for saving. Hence limit the slb saving to single
>> +			 * level of recursion.
>> +			 */
>> +			if (local_paca->in_mce == 1)
>> +				slb_save_contents(local_paca->mce_faulty_slbs);
>> +			flush_and_reload_slb();
>> +			disposition = RTAS_DISP_FULLY_RECOVERED;
>> +			break;
>> +		default:
>> +			break;
>> +		}
>> +	} else if (disposition == RTAS_DISP_LIMITED_RECOVERY) {
>> +		/* Platform corrected itself but could be degraded */
>> +		pr_err("MCE: limited recovery, system may be degraded\n");
>> +		disposition = RTAS_DISP_FULLY_RECOVERED;
>> +	}
> I would prefer if you just keep the mce_handle_err_realmode function
> (can rename it if you want). It's actually changed a bit since the
> patch being reverted so we don't want to undo that.

Ok, I will leave it as is for now, we can change it later.

>
> Thanks,
> Nick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20220117/154031a8/attachment.htm>


More information about the Linuxppc-dev mailing list