[RFC PATCH] lkdtm: Replace lkdtm_rodata_do_nothing() by do_nothing()
Christophe Leroy
christophe.leroy at csgroup.eu
Thu Feb 24 04:17:56 AEDT 2022
Hi Kees,
Le 17/10/2021 à 19:19, Christophe Leroy a écrit :
> All EXEC tests are based on running a copy of do_nothing()
> except lkdtm_EXEC_RODATA which uses a different function
> called lkdtm_rodata_do_nothing().
>
> On architectures using function descriptors, EXEC tests are
> performed using execute_location() which is a function
> that most of the time copies do_nothing() at the tested
> location then duplicates do_nothing() function descriptor
> and updates it with the address of the copy of do_nothing().
>
> But for EXEC_RODATA test, execute_location() uses
> lkdtm_rodata_do_nothing() which is already in rodata section
> at build time instead of using a copy of do_nothing(). However
> it still uses the function descriptor of do_nothing(). There
> is a risk that running lkdtm_rodata_do_nothing() with the
> function descriptor of do_thing() is wrong.
>
> To remove the above risk, change the approach and do the same
> as for other EXEC tests: use a copy of do_nothing(). The copy
> cannot be done during the test because RODATA area is write
> protected. Do the copy during init, before RODATA becomes
> write protected.
>
> Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
Any opinion on this patch ?
Thanks
Christophe
> ---
> This applies on top of series v3 "Fix LKDTM for PPC64/IA64/PARISC"
>
> drivers/misc/lkdtm/Makefile | 11 -----------
> drivers/misc/lkdtm/lkdtm.h | 3 ---
> drivers/misc/lkdtm/perms.c | 9 +++++++--
> drivers/misc/lkdtm/rodata.c | 11 -----------
> 4 files changed, 7 insertions(+), 27 deletions(-)
> delete mode 100644 drivers/misc/lkdtm/rodata.c
>
> diff --git a/drivers/misc/lkdtm/Makefile b/drivers/misc/lkdtm/Makefile
> index e2984ce51fe4..3d45a2b3007d 100644
> --- a/drivers/misc/lkdtm/Makefile
> +++ b/drivers/misc/lkdtm/Makefile
> @@ -6,21 +6,10 @@ lkdtm-$(CONFIG_LKDTM) += bugs.o
> lkdtm-$(CONFIG_LKDTM) += heap.o
> lkdtm-$(CONFIG_LKDTM) += perms.o
> lkdtm-$(CONFIG_LKDTM) += refcount.o
> -lkdtm-$(CONFIG_LKDTM) += rodata_objcopy.o
> lkdtm-$(CONFIG_LKDTM) += usercopy.o
> lkdtm-$(CONFIG_LKDTM) += stackleak.o
> lkdtm-$(CONFIG_LKDTM) += cfi.o
> lkdtm-$(CONFIG_LKDTM) += fortify.o
> lkdtm-$(CONFIG_PPC_BOOK3S_64) += powerpc.o
>
> -KASAN_SANITIZE_rodata.o := n
> KASAN_SANITIZE_stackleak.o := n
> -KCOV_INSTRUMENT_rodata.o := n
> -CFLAGS_REMOVE_rodata.o += $(CC_FLAGS_LTO)
> -
> -OBJCOPYFLAGS :=
> -OBJCOPYFLAGS_rodata_objcopy.o := \
> - --rename-section .noinstr.text=.rodata,alloc,readonly,load,contents
> -targets += rodata.o rodata_objcopy.o
> -$(obj)/rodata_objcopy.o: $(obj)/rodata.o FORCE
> - $(call if_changed,objcopy)
> diff --git a/drivers/misc/lkdtm/lkdtm.h b/drivers/misc/lkdtm/lkdtm.h
> index 188bd0fd6575..905555d4c2cf 100644
> --- a/drivers/misc/lkdtm/lkdtm.h
> +++ b/drivers/misc/lkdtm/lkdtm.h
> @@ -137,9 +137,6 @@ void lkdtm_REFCOUNT_SUB_AND_TEST_SATURATED(void);
> void lkdtm_REFCOUNT_TIMING(void);
> void lkdtm_ATOMIC_TIMING(void);
>
> -/* rodata.c */
> -void lkdtm_rodata_do_nothing(void);
> -
> /* usercopy.c */
> void __init lkdtm_usercopy_init(void);
> void __exit lkdtm_usercopy_exit(void);
> diff --git a/drivers/misc/lkdtm/perms.c b/drivers/misc/lkdtm/perms.c
> index 2c6aba3ff32b..9b951ca48363 100644
> --- a/drivers/misc/lkdtm/perms.c
> +++ b/drivers/misc/lkdtm/perms.c
> @@ -27,6 +27,7 @@ static const unsigned long rodata = 0xAA55AA55;
>
> /* This is marked __ro_after_init, so it should ultimately be .rodata. */
> static unsigned long ro_after_init __ro_after_init = 0x55AA5500;
> +static u8 rodata_area[EXEC_SIZE] __ro_after_init;
>
> /*
> * This just returns to the caller. It is designed to be copied into
> @@ -193,8 +194,7 @@ void lkdtm_EXEC_VMALLOC(void)
>
> void lkdtm_EXEC_RODATA(void)
> {
> - execute_location(dereference_function_descriptor(lkdtm_rodata_do_nothing),
> - CODE_AS_IS);
> + execute_location(rodata_area, CODE_AS_IS);
> }
>
> void lkdtm_EXEC_USERSPACE(void)
> @@ -269,4 +269,9 @@ void __init lkdtm_perms_init(void)
> {
> /* Make sure we can write to __ro_after_init values during __init */
> ro_after_init |= 0xAA;
> +
> + memcpy(rodata_area, dereference_function_descriptor(do_nothing),
> + EXEC_SIZE);
> + flush_icache_range((unsigned long)rodata_area,
> + (unsigned long)rodata_area + EXEC_SIZE);
> }
> diff --git a/drivers/misc/lkdtm/rodata.c b/drivers/misc/lkdtm/rodata.c
> deleted file mode 100644
> index baacb876d1d9..000000000000
> --- a/drivers/misc/lkdtm/rodata.c
> +++ /dev/null
> @@ -1,11 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * This includes functions that are meant to live entirely in .rodata
> - * (via objcopy tricks), to validate the non-executability of .rodata.
> - */
> -#include "lkdtm.h"
> -
> -void noinstr lkdtm_rodata_do_nothing(void)
> -{
> - /* Does nothing. We just want an architecture agnostic "return". */
> -}
More information about the Linuxppc-dev
mailing list