[PATCH v3 1/3] KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
Nicholas Piggin
npiggin at gmail.com
Mon Feb 21 18:23:51 AEDT 2022
PR KVM does not support running with AIL enabled, and SCV does is not
supported with AIL disabled. Fix this by ensuring the SCV facility is
disabled with FSCR while a CPU could be running with AIL=0.
The PowerNV host supports disabling AIL on a per-CPU basis, so SCV just
needs to be disabled when a vCPU is being run.
The pSeries machine can only switch AIL on a system-wide basis, so it
must disable SCV support at boot if the configuration can potentially
run a PR KVM guest.
Also ensure a the FSCR[SCV] bit can not be enabled when emulating
mtFSCR for the guest.
SCV is not emulated for the PR guest at the moment, this just fixes the
host crashes.
Alternatives considered and rejected:
- SCV support can not be disabled by PR KVM after boot, because it is
advertised to userspace with HWCAP.
- AIL can not be disabled on a per-CPU basis. At least when running on
pseries it is a per-LPAR setting.
- Support for real-mode SCV vectors will not be added because they are
at 0x17000 so making such a large fixed head space causes immediate
value limits to be exceeded, requiring a lot rework and more code.
- Disabling SCV for any PR KVM possible kernel will cause a slowdown
when not using PR KVM.
- A boot time option to disable SCV to use PR KVM is user-hostile.
- System call instruction emulation for SCV facility unavailable
instructions is too complex and old emulation code was subtly broken
and removed.
Reviewed-by: Fabiano Rosas <farosas at linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 4 ++++
arch/powerpc/kernel/setup_64.c | 28 ++++++++++++++++++++++++++++
arch/powerpc/kvm/Kconfig | 9 +++++++++
arch/powerpc/kvm/book3s_pr.c | 26 +++++++++++++++++---------
4 files changed, 58 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 55caeee37c08..b66dd6f775a4 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -809,6 +809,10 @@ __start_interrupts:
* - MSR_EE|MSR_RI is clear (no reentrant exceptions)
* - Standard kernel environment is set up (stack, paca, etc)
*
+ * KVM:
+ * These interrupts do not elevate HV 0->1, so HV is not involved. PR KVM
+ * ensures that FSCR[SCV] is disabled whenever it has to force AIL off.
+ *
* Call convention:
*
* syscall register convention is in Documentation/powerpc/syscall64-abi.rst
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index be8577ac9397..d973ae7558e3 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -197,6 +197,34 @@ static void __init configure_exceptions(void)
/* Under a PAPR hypervisor, we need hypercalls */
if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
+ /*
+ * - PR KVM does not support AIL mode interrupts in the host
+ * while a PR guest is running.
+ *
+ * - SCV system call interrupt vectors are only implemented for
+ * AIL mode interrupts.
+ *
+ * - On pseries, AIL mode can only be enabled and disabled
+ * system-wide so when a PR VM is created on a pseries host,
+ * all CPUs of the host are set to AIL=0 mode.
+ *
+ * - Therefore host CPUs must not execute scv while a PR VM
+ * exists.
+ *
+ * - SCV support can not be disabled dynamically because the
+ * feature is advertised to host userspace. Disabling the
+ * facility and emulating it would be possible but is not
+ * implemented.
+ *
+ * - So SCV support is blanket disabled if PR KVM could possibly
+ * run. That is, PR support compiled in, booting on pseries
+ * with hash MMU.
+ */
+ if (IS_ENABLED(CONFIG_KVM_BOOK3S_PR_POSSIBLE) && !radix_enabled()) {
+ init_task.thread.fscr &= ~FSCR_SCV;
+ cur_cpu_spec->cpu_user_features2 &= ~PPC_FEATURE2_SCV;
+ }
+
/* Enable AIL if possible */
if (!pseries_enable_reloc_on_exc()) {
init_task.thread.fscr &= ~FSCR_SCV;
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 18e58085447c..ddd88179110a 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -112,12 +112,21 @@ config KVM_BOOK3S_64_PR
guest in user mode (problem state) and emulating all
privileged instructions and registers.
+ This is only available for hash MMU mode and only supports
+ guests that use hash MMU mode.
+
This is not as fast as using hypervisor mode, but works on
machines where hypervisor mode is not available or not usable,
and can emulate processors that are different from the host
processor, including emulating 32-bit processors on a 64-bit
host.
+ Selecting this option will cause the SCV facility to be
+ disabled when the kernel is booted on the pseries platform in
+ hash MMU mode (regardless of PR VMs running). When any PR VMs
+ are running, "AIL" mode is disabled which may slow interrupts
+ and system calls on the host.
+
config KVM_BOOK3S_HV_EXIT_TIMING
bool "Detailed timing for hypervisor real-mode code"
depends on KVM_BOOK3S_HV_POSSIBLE && DEBUG_FS
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 34a801c3604a..7bf9e6ca5c2d 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -137,12 +137,15 @@ static void kvmppc_core_vcpu_load_pr(struct kvm_vcpu *vcpu, int cpu)
svcpu->slb_max = to_book3s(vcpu)->slb_shadow_max;
svcpu->in_use = 0;
svcpu_put(svcpu);
-#endif
/* Disable AIL if supported */
- if (cpu_has_feature(CPU_FTR_HVMODE) &&
- cpu_has_feature(CPU_FTR_ARCH_207S))
- mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~LPCR_AIL);
+ if (cpu_has_feature(CPU_FTR_HVMODE)) {
+ if (cpu_has_feature(CPU_FTR_ARCH_207S))
+ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~LPCR_AIL);
+ if (cpu_has_feature(CPU_FTR_ARCH_300) && (current->thread.fscr & FSCR_SCV))
+ mtspr(SPRN_FSCR, mfspr(SPRN_FSCR) & ~FSCR_SCV);
+ }
+#endif
vcpu->cpu = smp_processor_id();
#ifdef CONFIG_PPC_BOOK3S_32
@@ -165,6 +168,14 @@ static void kvmppc_core_vcpu_put_pr(struct kvm_vcpu *vcpu)
memcpy(to_book3s(vcpu)->slb_shadow, svcpu->slb, sizeof(svcpu->slb));
to_book3s(vcpu)->slb_shadow_max = svcpu->slb_max;
svcpu_put(svcpu);
+
+ /* Enable AIL if supported */
+ if (cpu_has_feature(CPU_FTR_HVMODE)) {
+ if (cpu_has_feature(CPU_FTR_ARCH_207S))
+ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_AIL_3);
+ if (cpu_has_feature(CPU_FTR_ARCH_300) && (current->thread.fscr & FSCR_SCV))
+ mtspr(SPRN_FSCR, mfspr(SPRN_FSCR) | FSCR_SCV);
+ }
#endif
if (kvmppc_is_split_real(vcpu))
@@ -174,11 +185,6 @@ static void kvmppc_core_vcpu_put_pr(struct kvm_vcpu *vcpu)
kvmppc_giveup_fac(vcpu, FSCR_TAR_LG);
kvmppc_save_tm_pr(vcpu);
- /* Enable AIL if supported */
- if (cpu_has_feature(CPU_FTR_HVMODE) &&
- cpu_has_feature(CPU_FTR_ARCH_207S))
- mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_AIL_3);
-
vcpu->cpu = -1;
}
@@ -1037,6 +1043,8 @@ static int kvmppc_handle_fac(struct kvm_vcpu *vcpu, ulong fac)
void kvmppc_set_fscr(struct kvm_vcpu *vcpu, u64 fscr)
{
+ if (fscr & FSCR_SCV)
+ fscr &= ~FSCR_SCV; /* SCV must not be enabled */
if ((vcpu->arch.fscr & FSCR_TAR) && !(fscr & FSCR_TAR)) {
/* TAR got dropped, drop it in shadow too */
kvmppc_giveup_fac(vcpu, FSCR_TAR_LG);
--
2.23.0
More information about the Linuxppc-dev
mailing list