[PATCH v2] soc: fsl: qe: request pins non-exclusively
Dmitry Torokhov
dmitry.torokhov at gmail.com
Mon Dec 5 10:59:29 AEDT 2022
Commit 84582f9ed090 ("soc: fsl: qe: Avoid using gpio_to_desc()") changed
qe_pin_request() to request and hold GPIO corresponding to a given pin.
Unfortunately this does not work, as fhci-hcd requests these GPIOs
first, befor calling qe_pin_request() (see
drivers/usb/host/fhci-hcd.c::of_fhci_probe()).
To fix it change qe_pin_request() to request GPIOs non-exclusively, and
free them once the code determines GPIO controller and offset for each
GPIO/pin.
Also reaching deep into gpiolib implementation is not the best idea. We
should either export gpio_chip_hwgpio() or keep converting to the global
gpio numbers space until we fix the driver to implement proper pin
control.
Fixes: 84582f9ed090 ("soc: fsl: qe: Avoid using gpio_to_desc()")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
---
v2:
- rebased on top of soc/driver. This will conflict with
c9eb6e546a23 soc: fsl: qe: Switch to use fwnode instead of of_node
found in next, the resolution is trivial: accept
fwnode_device_is_compatible() line found in next.
- fixed leak of gpiod when gc is not found
- dropped Linus' reviewed-by as the patch changed
drivers/soc/fsl/qe/gpio.c | 51 +++++++++++++++++--------------------
drivers/usb/host/fhci-hcd.c | 2 +-
include/soc/fsl/qe/qe.h | 5 ++--
3 files changed, 28 insertions(+), 30 deletions(-)
diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
index af9193e7e49b..1440922341d8 100644
--- a/drivers/soc/fsl/qe/gpio.c
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -13,19 +13,12 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/of_gpio.h> /* for of_mm_gpio_chip */
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <soc/fsl/qe/qe.h>
-/*
- * FIXME: this is legacy code that is accessing gpiolib internals in order
- * to implement a custom pin controller. The proper solution is to create
- * a real combined pin control and GPIO driver in drivers/pinctrl. However
- * this hack is here for legacy code reasons.
- */
-#include "../../../gpio/gpiolib.h"
struct qe_gpio_chip {
struct of_mm_gpio_chip mm_gc;
@@ -147,65 +140,70 @@ struct qe_pin {
* something like qe_pio_controller. Someday.
*/
struct qe_gpio_chip *controller;
- struct gpio_desc *gpiod;
int num;
};
/**
* qe_pin_request - Request a QE pin
- * @np: device node to get a pin from
- * @index: index of a pin in the device tree
+ * @dev: device to get the pin from
+ * @index: index of the pin in the device tree
* Context: non-atomic
*
* This function return qe_pin so that you could use it with the rest of
* the QE Pin Multiplexing API.
*/
-struct qe_pin *qe_pin_request(struct device_node *np, int index)
+struct qe_pin *qe_pin_request(struct device *dev, int index)
{
struct qe_pin *qe_pin;
struct gpio_chip *gc;
struct gpio_desc *gpiod;
+ int gpio_num;
int err;
qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
if (!qe_pin) {
- pr_debug("%s: can't allocate memory\n", __func__);
+ dev_dbg(dev, "%s: can't allocate memory\n", __func__);
return ERR_PTR(-ENOMEM);
}
- gpiod = fwnode_gpiod_get_index(of_fwnode_handle(np), NULL, index, GPIOD_ASIS, "qe");
- if (IS_ERR(gpiod)) {
- err = PTR_ERR(gpiod);
- goto err0;
- }
- if (!gpiod) {
- err = -EINVAL;
+ /*
+ * Request gpio as nonexclusive as it was likely reserved by the
+ * caller, and we are not planning on controlling it, we only need
+ * the descriptor to the to the gpio chip structure.
+ */
+ gpiod = gpiod_get_index(dev, NULL, index,
+ GPIOD_ASIS | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+ err = PTR_ERR_OR_ZERO(gpiod);
+ if (err)
goto err0;
- }
+
gc = gpiod_to_chip(gpiod);
+ gpio_num = desc_to_gpio(gpiod);
+ /* We no longer need this descriptor */
+ gpiod_put(gpiod);
+
if (WARN_ON(!gc)) {
err = -ENODEV;
goto err0;
}
- qe_pin->gpiod = gpiod;
+
qe_pin->controller = gpiochip_get_data(gc);
/*
* FIXME: this gets the local offset on the gpio_chip so that the driver
* can manipulate pin control settings through its custom API. The real
* solution is to create a real pin control driver for this.
*/
- qe_pin->num = gpio_chip_hwgpio(gpiod);
+ qe_pin->num = gpio_num - gc->base;
if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
- pr_debug("%s: tried to get a non-qe pin\n", __func__);
- gpiod_put(gpiod);
+ dev_dbg(dev, "%s: tried to get a non-qe pin\n", __func__);
err = -EINVAL;
goto err0;
}
return qe_pin;
err0:
kfree(qe_pin);
- pr_debug("%s failed with status %d\n", __func__, err);
+ dev_dbg(dev, "%s failed with status %d\n", __func__, err);
return ERR_PTR(err);
}
EXPORT_SYMBOL(qe_pin_request);
@@ -220,7 +218,6 @@ EXPORT_SYMBOL(qe_pin_request);
*/
void qe_pin_free(struct qe_pin *qe_pin)
{
- gpiod_put(qe_pin->gpiod);
kfree(qe_pin);
}
EXPORT_SYMBOL(qe_pin_free);
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 95a44462bed0..1f666804fa91 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -651,7 +651,7 @@ static int of_fhci_probe(struct platform_device *ofdev)
}
for (j = 0; j < NUM_PINS; j++) {
- fhci->pins[j] = qe_pin_request(node, j);
+ fhci->pins[j] = qe_pin_request(dev, j);
if (IS_ERR(fhci->pins[j])) {
ret = PTR_ERR(fhci->pins[j]);
dev_err(dev, "can't get pin %d: %d\n", j, ret);
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index b02e9fe69146..eb5079904cc8 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -172,14 +172,15 @@ static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; }
/*
* Pin multiplexing functions.
*/
+struct device;
struct qe_pin;
#ifdef CONFIG_QE_GPIO
-extern struct qe_pin *qe_pin_request(struct device_node *np, int index);
+extern struct qe_pin *qe_pin_request(struct device *dev, int index);
extern void qe_pin_free(struct qe_pin *qe_pin);
extern void qe_pin_set_gpio(struct qe_pin *qe_pin);
extern void qe_pin_set_dedicated(struct qe_pin *pin);
#else
-static inline struct qe_pin *qe_pin_request(struct device_node *np, int index)
+static inline struct qe_pin *qe_pin_request(struct device *dev, int index)
{
return ERR_PTR(-ENOSYS);
}
--
2.39.0.rc0.267.gcb52ba06e7-goog
--
Dmitry
More information about the Linuxppc-dev
mailing list