[PATCH 1/3] dt-bindings: reset: syscon-reboot: Add priority property

[Pali Rohár]

This new optional priority property allows to specify custom priority level
of reset device. Default level was always 192.

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 .../devicetree/bindings/power/reset/syscon-reboot.yaml        | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index da2509724812..d905133aab27 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -42,6 +42,10 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: The reset value written to the reboot register (32 bit access).
 
+  priority:
+    $ref: /schemas/types.yaml#/definitions/sint32
+    description: Priority level of this syscon reset device. Default 192.
+
 required:
   - compatible
   - offset
-- 
2.20.1