[RESEND PATCH net-next v4 00/25] net: dpaa: Cleanups in preparation for phylink conversion

[Sean Anderson]

This series contains several cleanup patches for dpaa/fman. While they
are intended to prepare for a phylink conversion, they stand on their
own. This series was originally submitted as part of [1].

[1] https://lore.kernel.org/netdev/20220715215954.1449214-1-sean.anderson@seco.com

Changes in v4:
- Clarify commit message
- weer -> were
- tricy -> tricky
- Use mac_dev for calling change_addr
- qman_cgr_create -> qman_create_cgr

Changes in v3:
- Incorperate some minor changes into the first FMan binding commit

Changes in v2:
- Convert FMan MAC bindings to yaml
- Remove some unused variables
- Fix prototype for dtsec_initialization
- Fix warning if sizeof(void *) != sizeof(resource_size_t)
- Specify type of mac_dev for exception_cb
- Add helper for sanity checking cgr ops
- Add CGR update function
- Adjust queue depth on rate change

Sean Anderson (25):
  dt-bindings: net: Convert FMan MAC bindings to yaml
  net: fman: Convert to SPDX identifiers
  net: fman: Don't pass comm_mode to enable/disable
  net: fman: Store en/disable in mac_device instead of mac_priv_s
  net: fman: dtsec: Always gracefully stop/start
  net: fman: Get PCS node in per-mac init
  net: fman: Store initialization function in match data
  net: fman: Move struct dev to mac_device
  net: fman: Configure fixed link in memac_initialization
  net: fman: Export/rename some common functions
  net: fman: memac: Use params instead of priv for max_speed
  net: fman: Move initialization to mac-specific files
  net: fman: Mark mac methods static
  net: fman: Inline several functions into initialization
  net: fman: Remove internal_phy_node from params
  net: fman: Map the base address once
  net: fman: Pass params directly to mac init
  net: fman: Use mac_dev for some params
  net: fman: Specify type of mac_dev for exception_cb
  net: fman: Clean up error handling
  net: fman: Change return type of disable to void
  net: dpaa: Use mac_dev variable in dpaa_netdev_init
  soc: fsl: qbman: Add helper for sanity checking cgr ops
  soc: fsl: qbman: Add CGR update function
  net: dpaa: Adjust queue depth on rate change

 .../bindings/net/fsl,fman-dtsec.yaml          | 145 +++++
 .../devicetree/bindings/net/fsl-fman.txt      | 128 +----
 .../net/ethernet/freescale/dpaa/dpaa_eth.c    |  59 ++-
 .../ethernet/freescale/dpaa/dpaa_eth_sysfs.c  |   2 +-
 drivers/net/ethernet/freescale/fman/fman.c    |  31 +-
 drivers/net/ethernet/freescale/fman/fman.h    |  31 +-
 .../net/ethernet/freescale/fman/fman_dtsec.c  | 325 ++++++------
 .../net/ethernet/freescale/fman/fman_dtsec.h  |  58 +-
 .../net/ethernet/freescale/fman/fman_keygen.c |  29 +-
 .../net/ethernet/freescale/fman/fman_keygen.h |  29 +-
 .../net/ethernet/freescale/fman/fman_mac.h    |  24 +-
 .../net/ethernet/freescale/fman/fman_memac.c  | 240 +++++----
 .../net/ethernet/freescale/fman/fman_memac.h  |  57 +-
 .../net/ethernet/freescale/fman/fman_muram.c  |  31 +-
 .../net/ethernet/freescale/fman/fman_muram.h  |  32 +-
 .../net/ethernet/freescale/fman/fman_port.c   |  29 +-
 .../net/ethernet/freescale/fman/fman_port.h   |  29 +-
 drivers/net/ethernet/freescale/fman/fman_sp.c |  29 +-
 drivers/net/ethernet/freescale/fman/fman_sp.h |  28 +-
 .../net/ethernet/freescale/fman/fman_tgec.c   | 163 +++---
 .../net/ethernet/freescale/fman/fman_tgec.h   |  54 +-
 drivers/net/ethernet/freescale/fman/mac.c     | 497 ++----------------
 drivers/net/ethernet/freescale/fman/mac.h     |  45 +-
 drivers/soc/fsl/qbman/qman.c                  |  76 ++-
 include/soc/fsl/qman.h                        |   9 +
 25 files changed, 739 insertions(+), 1441 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml

-- 
2.35.1.1320.gc452695387.dirty