[PATCH] i2c: pasemi: Wait for write xfers to finish

[Wolfram Sang]

On Tue, Mar 29, 2022 at 08:38:17PM +0200, Martin Povišer wrote:
> Wait for completion of write transfers before returning from the driver.
> At first sight it may seem advantageous to leave write transfers queued
> for the controller to carry out on its own time, but there's a couple of
> issues with it:
> 
>  * Driver doesn't check for FIFO space.
> 
>  * The queued writes can complete while the driver is in its I2C read
>    transfer path which means it will get confused by the raising of
>    XEN (the 'transaction ended' signal). This can cause a spurious
>    ENODATA error due to premature reading of the MRXFIFO register.
> 
> Adding the wait fixes some unreliability issues with the driver. There's
> some efficiency cost to it (especially with pasemi_smb_waitready doing
> its polling), but that will be alleviated once the driver receives
> interrupt support.
> 
> Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver")
> Signed-off-by: Martin Povišer <povik+lin at cutebit.org>

Applied to for-current, thanks!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20220415/26710691/attachment-0001.sig>