[PATCH v3 3/6] powerpc/64s/perf: add power_pmu_wants_prompt_pmi to say whether perf wants PMIs to be soft-NMI

[Nicholas Piggin]

Interrupt code enables MSR[EE] in some irq handlers while keeping local
irqs disabled via soft-mask, allowing PMI interrupts to be taken as
soft-NMI to improve profiling of irq handlers.

When perf is not enabled, there is no point to doing this, it's
additional overhead. So provide a function that can say if PMIs should
be taken promptly if possible.

Cc: Madhavan Srinivasan <maddy at linux.ibm.com>
Cc: Athira Rajeev <atrajeev at linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 arch/powerpc/include/asm/hw_irq.h |  2 ++
 arch/powerpc/perf/core-book3s.c   | 31 +++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 21cc571ea9c2..b987822e552e 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -306,6 +306,8 @@ static inline bool lazy_irq_pending_nocheck(void)
 	return __lazy_irq_pending(local_paca->irq_happened);
 }
 
+bool power_pmu_wants_prompt_pmi(void);
+
 /*
  * This is called by asynchronous interrupts to conditionally
  * re-enable hard interrupts after having cleared the source
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 73e62e9b179b..773d07d68b6d 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -17,6 +17,7 @@
 #include <asm/firmware.h>
 #include <asm/ptrace.h>
 #include <asm/code-patching.h>
+#include <asm/hw_irq.h>
 #include <asm/interrupt.h>
 
 #ifdef CONFIG_PPC64
@@ -2381,6 +2382,36 @@ static void perf_event_interrupt(struct pt_regs *regs)
 	perf_sample_event_took(sched_clock() - start_clock);
 }
 
+/*
+ * If the perf subsystem wants performance monitor interrupts as soon as
+ * possible (e.g., to sample the instruction address and stack chain),
+ * this should return true. The IRQ masking code can then enable MSR[EE]
+ * in some places (e.g., interrupt handlers) that allows PMI interrupts
+ * though to improve accuracy of profiles, at the cost of some performance.
+ *
+ * The PMU counters can be enabled by other means (e.g., sysfs raw SPR
+ * access), but in that case there is no need for prompt PMI handling.
+ *
+ * This currently returns true if any perf counter is being used. It
+ * could possibly return false if only events are being counted rather than
+ * samples being taken, but for now this is good enough.
+ */
+bool power_pmu_wants_prompt_pmi(void)
+{
+	struct cpu_hw_events *cpuhw;
+
+	/*
+	 * This could simply test local_paca->pmcregs_in_use if that were not
+	 * under ifdef KVM.
+	 */
+
+	if (!ppmu)
+		return false;
+
+	cpuhw = this_cpu_ptr(&cpu_hw_events);
+	return cpuhw->n_events;
+}
+
 static int power_pmu_prepare_cpu(unsigned int cpu)
 {
 	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
-- 
2.23.0